WMF WMF 1000 S User manual

WMF1000
User Manual EN

The first premium machine that brings
home 125 years of coffee expertise.
WMF has been involved in the preparation of coffee since 1880. The
first WMF large coffee machine dates back to 1927.
Just 30 years later, in 1955, the great victory campaign of WMF
coffee machines began, when WMF brought Italian espresso to
German restaurants with the first fully automatic espresso machine.
This was followed by a multitude of ground-breaking innovations,
which brought WMF world-wide success. WMF was then the first
manufacturer to follow the fully automatic espresso with latte
macchiato at the touch of a button for the restaurant trade.
The power of innovation, standard WMF quality, and many years of
experience are the basis of the reputation that WMF professional
machines enjoy today. Our coffee machines now provide the best
quality coffee in top-quality restaurants around the world.
And now at home: The new WMF 1000.
The first professional coffee machine for the home:
The WMF 1000 “Blitz” from 1954

1
Introduction
Milk button /
Milk foam button
Milk hose
Minus button /
Care button /
Aroma button
Plus button /
Aroma button
P button / Confirm
off/c button / Timer
Refrigerated milk tank
(optional)
Removable drip tray with
drip tray grid
Water tank
Height-adjustable
All-in-One spout with
integral milk foamer
Coffee grounds container
Beverage buttons
Hot water spout
Hot water button
DisplayManual insert Heated cup storageBean hopper
Introduction and General Information
Parts of the machine

The WMF 1000 is a professional, fully automatic
coffee machine. The coffee machine is intended
for home use and has been developed based on our
experience and knowledge of high-performance
coffee machines for restaurants and hotels.
The WMF 1000 offers you a unique range of
beverages and access to well-established technology.
You will be impressed by the technical design,
durability, efficiency and, first and foremost, the
quality of the coffee.
The WMF 1000 fully automatically dispenses
twelve fresh international specialties: Espresso,
Ristretto, Café Crème, Cappuccino, Milk coffee, Latte
Macchiato, Espresso Macchiato and warm milk.
With the new All-In-One spout you can make two
cups of cappuccino at once. It can also provide hot
water to be used for tea, for example.
All beverages can be individually programmed for
taste, fill level, and composition.
The display makes it easy to operate your WMF 1000,
and guides you safely through each program step.
The care of your WMF 1000 is very important. We
have developed a completely new customer care
program for rinsing the milk system. All customer
care programs run completely automatically and
ensure that your coffee machine is always clean and
can make perfect coffee for you.
The Perfect Extraction System ensures optimal
adjustment of the grinding degree.

Congratulations on the purchase of your WMF 1000 .

4
Table of Contents
Introduction and General Information 1
Parts of the machine 1
The first premium machine that brings home 125 years of coffee expertise. 2
Before you begin 6
User manual signs and symbols 6
Start-up 8
Unpacking and setting up 8
Test the water hardness 8
Prepare the water tank 8
Insert the WMF water filter 9
Install the milk hose 10
Fill the water tank 10
Connect the milk hose to the milk 10
Fill the coffee bean hopper 11
Start-up 11
Basic settings 12
Operation 16
Operating and lighting concept 16
Preparation of coffee beverages 16
Beverage button overview 16
Example: Prepare a cup of latte machhiato 17
Increase coffee strength for the next beverage 17
Preparing milk and milk foam 19
Dispensing hot water 20
General beverage preparation 20
Cancel beverage preparation 20
WMF All-in-One spout 21
Adjusting the height 21
Control buttons 22
Switching the coffee machine on and off 23
Switching on 23
Switching off 23
Switching the coffee machine on and off with the timer 24
Setting the automatic switch on time 24
Display timer operation 24
Manual switch on for timer operation 24
Manual switch off for timer operation 24
Settings 26
Cup size (Cup volumes) 26
Beverage settings 27
Grinding degree setting 30
Check the grinding degree using the WMF Perfect Extraction System 30
Set the grinding degree 31
Basic settings 32
Read counters 33
Care 35
Care overview 35
General care programs 36
Call up the care programs 36
Warm-up rinse/Coffee system rinse 37
WMF Connect & Clean milk system rinse 37
Cleaning the machine - Cleaning program 38
Replace water filter 40
Descale coffee machine 41
Manual cleaning 44
Cleaning the milk system 44
Cleaning the brewing unit 46
General cleaning 48

5
Table of Contents
Tips and Tricks for Perfect Coffee Beverages 50
Twelve International specialties at the touch of a button 52
Messages and instructions 53
Operating messages 53
Empty grounds container 53
Refill water tank 53
Empty drip tray and clean it 53
Bean hopper is empty 54
Insert coffee grounds 54
Change filter 54
Side door open 55
Spout downwards 55
Grinding degree too fine?/Brewing unit stopped up? 55
Error messages and malfunctions 56
Error messages on the display 56
Errors with no malfunction display 58
Safety 61
Safety instructions 61
Hazard instructions 61
Correct use 62
Warranty/Guarantee 63
24 Month Premium Service Maintenance 64
WMF Service Center 64
Service ticket WMF 1000 66
Transport and disposal 67
Accessories and spare parts 68
Scope of supply 68
Optional accessories and spare parts 68
Technical Data 69
Index 70

6
Introduction
Before you begin
Read this user manual before you begin dispensing coffee.
Only then can you use all of the functions, operate the machine safely and indulge yourself
with a wonderful cup of coffee.
Additional components of the user manual:
Brief manual for beverage dispensing/care•
User manual signs and symbols
Hazard notices
Caution!
Risk to machine!
General hazard!
Caution!
Risk to the user!
Caution!
Hot liquid!
Caution!
Hot surface!
Warning!
Risk of electric shock!
Caution!
Danger of hand injuries!
Tips and hints
Instruction Cross reference
Tip
Always follow the safety instructions in the “Safety” chapter, page 60.

7
Introduction
Ready to operate display
The descriptions in the user manual always assume that the coffee machine is ready to operate.
Glossary
Term Declaration
• Listings, selection options•
>Individual actions, individual steps>
Text in italics Description of coffee machine state and/or explanations of steps carried
out automatically
your selection pls
08:15 09.06.2008

8
Start-up program
Start-up
Unpacking and setting up
>Unpack coffee machine and set it up on a stable, horizontal surface
Always heed the safety instructions in the “Safety” chapter, starting on page 56.
Inspect the coffee machine for possible shipping damage
>
Plug the connector into a grounded outlet>
Insert drip tray and drip tray grid>
Test the water hardness
Briefly dip a carbonate hardness test strip into water (approx. 1 second)>
One minute later, read the degree of hardness on the colour scale of the test strip package>
The water hardness is set during start-up.
Prepare the water tank
>Lift the water tank slightly and remove from the coffee machine
Remove all accessories from the water tank
>
Rinse the water tank thoroughly with clear water>
Do not put the water tank back into the machine yet. The milk hose must be assembled first.
Cable compartment
Fill the water tank with drinking water

9
Start-up
Insert the WMF water filter
The optional WMF water filter ensures the best coffee quality and protects the coffee machine from
calcium deposits.
For water hardness 0-4, do not use a water filter.
Remove the built-in filter from the front of the water tank
>[1]
Pull up the latch on the cartridge adapter
>[2]
Place the cartridge adapter on the water spout supports from above
>[3]
Push down the latch on the cartridge adapter
>[3]
Unpack the water filter cartridge and place it on the cartridge adapter
>[4]
The sieve and water filter sit very securely.
123
4

10
Start-up program
Install the milk hose
The milk hose is already mounted on the All-in-One spout.
For refrigerated milk, use the brown milk nozzle (installed on delivery)•
For non-refrigerated milk, use the transparent milk nozzle from the accessories box•
The nozzle fits very tightly in the hose. The easiest way to remove it is to pull while twisting.
Move the All-in-One spout to the lowest position
>
Insert the milk hose into the guide>
The milk hose must not be under tension when in the lowest position, and must not run in front of the
grounds container.
Fill the water tank
Fill the water tank with cold tap water (max. 2.8 litres)>
Slowly slide the water tank back into the machine>
Fill the water tank only with fresh, cold water.
Never use hot water, mineral water, milk or other liquids.
Connect the milk hose to the milk
Place the refrigerated milk directly to the left of the machine>
Place the milk hose with the milk nozzle on it into the milk container>
The hose end with the milk nozzle should reach the bottom of the milk container.
Milk is a very sensitive food.
When handling milk, always ensure cleanliness.
Only open packs with clean hands and utensils.
Take care that no bacteria can be introduced into the milk.

11
Start-up
Fill the coffee bean hopper
>Lift the lid by the back side and remove it
Fill with coffee beans (up to 320g)
>
Replace the lid>
Once roasted coffee beans have been unpacked, they lose their aromatic components
within days.
Therefore only pour as many beans into the coffee bean hopper as you expect to use in the
next few days; frequent topping off is better.
Ensure that no foreign bodies land in the coffee bean hopper.
Such foreign bodies can damage the grinders of the coffee mill. This damage is not covered
under the warranty.
Do not reach into the bean opening of the mill.
Each coffee machine is thoroughly tested before shipment. Therefore, coffee grounds
residue may remain in the grinder. Your coffee machine is not used.
Start-up
>Press the off/c button
The start-up program begins.
Press the
>+ button to set the desired language
Confirm with the P button
>
The machine is switched on, the start-up program leads you through the basic settings.
language: english
OK: P change: -/+
The set values can be changed in the
“Basic Settings” program after start-up.
w Settings
Page 26
Initial settings
WMF 1000

12
Start-up program
Basic settings
Press the>– and + buttons to set the desired values
Press the P button to confirm the values and inputs
>
After confirmation, the program jumps to the next point of the settings.
The new values are saved when you exit the program.
Time of day
Set the current time here
>
hh= hour (two places) mm= minutes (two places) ss= seconds (two places)
Press the P button to confirm the values
>
After confirmation, the program jumps to the next point of the settings.
The new values are saved when you exit the program.
Date
Set the current date here with the
>– and + buttons
dd= day (two places) mm= month (two places) yyyy = year (four places)
Press the P button to confirm the values
>
After confirmation, the program jumps to the next point of the settings.
Water hardness
Set the result of the carbonate hardness test here with the
>– and + buttons
Confirm the value with the P button
>
After confirmation, the program jumps to the next point of the settings.
Select
P Confirm
Care button
– Page backward
Reduce value
+ Page forward
Increase value
The new values are saved when you exit
the program.
Time hh:m m:ss
OK: P change: -/+
date dd:mm:yyyy
OK: P change: -/+
Water hardness: 13-16
OK: P change: -/+
Carbonate hardness test
w Accessories and spare parts
Page 68

13
Start-up
Water filter
Enter here with the
>– and + buttons whether you are using a tank filter
(recommended for water hardness 5 °dKH and higher)
Press the P button to confirm the setting
>
If “water filter” is set, then the filter should be rinsed now.
>Set a container with approx. 3 litres capacity under the hot water spout
When rinsing the filter, you will hear unusual noises. This is normal. The noises will stop during the filter
rinse.
Fill the water tank with cold tap water
>
Slowly slide the water tank back into the machine>
The machine now heats up.
After the machine has heated up, there is a coffee system rinse. This warms up all the pipes.
After each brewing cycle, in the heating up phase and during the care programs, so-called release
water runs into the drip tray.
Place a container for the rinse water (approx. 120ml) under the All-in-One spout
>
The coffee system rinse lasts approx. 40 seconds; after this, the machine is ready to operate.
Water filter: No
OK: P change: -/+
place 3L container
under h.w. spout
Rinse filter:
Follow the display messages
Insert the WMF water filter
w Start-up
w Prepare the water tank
Page 8
Replace water filter
w Care w General care programs
Page 40
heating up ...
Select
P Confirm
Care button
– Page backward
Reduce value
+ Page forward
Increase value
The new values are saved when you exit
the program.
your selection pls
08:15 09.06.2008

14
Start-up program
Start-up complete
Setup is now complete. All settings can be changed now, or at a later time.
The following setting options are available:
Set cup size•
Beverage setting•
• Basic settings
Grinding degree setting•
For perfection in your preparation of coffee we have compiled a chapter of “Tips and Tricks”.
Switching on and off
When switching the machine on and off, an automatic coffee system rinse starts
automatically. This requires that sufficient water be in the tank at all times.
Empty the drip tray regularly, since the rinse water (approx. 120ml) runs into the drip tray
through the All-in-One spout. You can place a container under the All-in-One spout to
catch the rinse water.
About the timer: Switching on and off
The coffee machine automatically switches itself off at a pre-set time. In this circumstance
as well, the machine performs a coffee system rinse directly before switching off.
Empty the drip tray regularly, since the rinse water (approx. 120ml) is emptied into the drip
tray through the All-in-One spout. You can place a container under the All-in-One spout to
catch the rinse water.
w Set grinding degree
Page 30
w Tips and Tricks for Perfect
Coffee Beverages
Page 50
Setting automatic switch off time after
last beverage dispensing
w Settings w Basic settings
Page 32

16
Operation
Operation
This chapter explains all you need to know about simple preparation of coffee using the WMF 1000.
Operating and lighting concept•
Preparation of coffee beverages•
Example: Prepare a cup of latte machhiato•
Prepare milk and milk foam•
Dispense hot water•
All-in-One spout•
Control buttons•
Caution! Burning and scalding hazard!
The All-in-One spout and the hot water spout can get very hot.•
The beverages dispensed and the escaping steam are very hot!•
Never touch the spouts during or directly after dispensing beverages!•
Nevertouch the beverages, rinse and cleaning water or steam during or directly after•
dispensing beverages!
Operating and lighting concept
The lighting system helps you with navigation. Only the buttons that can be used in the current
situation are lighted.
Preparation of coffee beverages
In the centre of the WMF 1000 is a multi-function knob with four beverage buttons. Herein lie all
the international coffee specialities that you can imagine. Each of the four buttons is assigned several
beverages.
Beverage button overview
1x briefly 1x espresso 1x café crème 1x briefly
2x briefly 2x espresso 2x café crème 2x briefly
1x long 1x ristretto 1x mug café crème 1x long
1x briefly 1x cappuccino 1x latte macchiato 1x briefly
2x briefly 2x cappuccino not used
1x long 1x cafe latte 1x espresso macchiato 1x long
Always observe the safety instructions to
operate the WMF 1000 safely.
w Safety
Page 61

17
Operation
Example: Prepare a cup of latte machhiato
Here is a step-by-step description of how to prepare a cup of latte macchiato.
This description serves as an example for the preparation of all beverages. All steps are carried out for
the preparation of the other beverages according to the example.
If necessary, adjust the height of the All-in-One spout to the height of the drinking vessel
>
The All-in-One spout must not be in the top position.
Place an appropriate drinking vessel under the All-in-One spout
>
Press the latte macchiato button briefly>
See beverage button overview.
The beverage button lights up when pressed.
The display indicates:
Depending on the setting, the coffee beans are ground appropriately for the selected beverage.
The preparation occurs as specified in the beverage settings.
The beverage is prepared and dispensed into the drinking vessel underneath the spout.
The ready to operate display indicates:
Increase coffee strength for the next beverage
Before each coffee preparation, you can decide how strong you want the next coffee beverage to be.
The following coffee strengths are available:
Mild• (approximately 15 % weaker than the saved setting)
Normal• (corresponds to your setting)
Strong• (approximately 15 % weaker than the saved setting)
Place an appropriate drinking vessel under the All-in-One spout
>
Select the desired coffee strength with the>– and + buttons
Select the beverage
>
The beverage button selected lights up and the beverage name is indicated on the display.
The selected beverage is prepared.
You can cancel the current beverage dispensing. Press the off/c button
Adjusting the height
w Operation w WMF All-in-One spout
Page 21
Coffee preparation using the manual insert
w Operation w Prepare coffee beverages
Page 16
w Operation w Prepare milk and milk foam
Page 19
1x latte macchiato
Dispense milk:
The All-in-One spout is at the top position.
Dispense milk foam:
The All-in-One spout is not at the top
position.
If a beverage is selected and the
All-in-One spout is not in the appropriate
position, then a reminder is shown on the
display.
your selection pls
08:15 09.06.2008
w Operation w Preparing beverages
Page 16
w Bedienen
w Cancel beverage preparation
Page 20

18
Operation
Coffee preparation using the manual insert
In addition to the coffee bean hopper, you can use the manual insert to make second type of coffee,
such as decaffeinated coffee.
Place an appropriate container under the All-in-One spout
>
Remove the lid of the manual insert>
The display instructs:
Place the ground coffee for one brewing cycle in the manual insert
>
Close the lid>
Select the beverage with the beverage buttons (one cup)>
This procedure can be cancelled with the off/c button.
Always use ground coffee for the manual insert (max. 15 g per preparation).
The coffee machine gets soiled inside if too much ground coffee is put in at once.
Do not use water-soluble, freeze-dried instant coffee.
Each brewing cycle using the manual insert is measured separately.
Coffee ground too fine can cause malfunctions.
insert coff. grounds
select beverage
Cleaning the brewing unit
w Care w Manual cleaning
Page 46