WOOSIM WSP-i350 User manual

http://www.woosim.com
MODEL WSP-i350
(3inch Industrial Printer)
Rev. 3.0
WOOSIM SYSTEMS Inc.
#501, Daerung Technotown 3th,
448, Gasan-Dong, GeumChun-Ku,
Seoul, Korea
Tel : [phone]
Fax : [phone]
URL: http://www.woosim.com
All specifications are subjected to change without notice

WSP-i350 Rev. 3.0
http://www.woosim.com
2
¦ Copyright
WSP-i350 3inch Industrial printer operator’s manual.
Copyright ⓒ2010 by Woosim Systems Inc.
All rights reserved.
The information contained in this manual is the property of Woosim
Systems Inc.
And may not be reproduced in whole or in part without the prior written
permission of Woosim Systems Inc.
¦ Trademark
a registered trademark of Woosim Systems Inc.
All other trademark are the properties of their respective companies.
¦ Caution
Some semiconductor devices are easily damaged by static electricity. You
should turn the printer “OFF”, before you connect or removed the cable on
the rear side, in order to guard the printer against the static electricity.
If the printer is damaged by the static electricity, you should turn the
printer “OFF”
¦ Notice
The contents of this manual are subject to change without notice.

WSP-i350 Rev. 3.0
http://www.woosim.com
3
¦ Introduction
The WSP-i350 is the ideal solution for Mobile banking system , Retail,
point of sales, Credit card Transaction, other traveling and mobile
computing etc.
The general features of WSP-i350 printer are as follows:
u Compact size (120×130.5×58.3mm)
u Light weight(560g) for true mobility [standard]
u Very silent printing thru direct thermal printing method
u High speed (80mm/sec, MAX)
u High resolution(203dpi : 8dots/mm).
u UART(RS-232C or TTL), Bluetooth Ver2.1 + EDR, USB[option]
IrDA Ver1.0(SIR) [option], Wireless LAN (IEEE802.11b/g)[option] interface
u Support Magnetic Stripe Reader[option]
u Support Graphic LCD(128×32dots) with Blue LED Backlight
u Support text and graphic printing
u Intutive LED’s indicate Power(on/off), Error
u Easier paper roll loading by CLAMSHELL design
u One touch paper cover
u Printer door open & Paper-out sensor
u Easier maintenance with self-diagnostic.
u In field programming – Update Firmware, Download Fonts and Logos
u Water-resistant construction.( IP54 – Certified )
u Microsoft Windows XP / VISTA / 7 / CE / Linux / Android compatible.
u Flow control : Software (XON/XOFF)
※ Hardware flow control not supported in printer.
u Free fall: 1.5 meter onto concrete
u Agency Approvals

WSP-i350 Rev. 3.0
http://www.woosim.com
4
¦ Operating Precautions
Please follow the precautions below to enjoy and maintain the full performance
of the printer.
u Using the Printer
● Be careful not to drop or bump the printer on a hard surface.
● Do not install the printer in direct sunlight or such areas.
Suitable environment for the use of the printer is as follows:
◆ Operating temperature :-10°C to 50°C
◆ Relative humidity : 30% to 80%
● Do not install the printer near devices that generate strong
electromagnetic fields such as a copy machine.
● Do not open the platen cover during printing .
● Do not remove or reinstall the communication cable during printing
or transmission.
● Do not touch the connectors of the communication during printing.
● Switch the POWER OFF when not in use.
● Do not use alcohol or other solvent.
● The AC adapter, the battery charger and the battery pack may
become warm when in use. This is normal and is not a malfunction.
● When the battery pack is used at low temperature, the length of time
the printer can be used may be shortened.
u Thermal Paper Handling
● Store the thermal paper in a cool, dry and dark place.
● Do not rub the paper with hard object.
● Do not leave the paper with hard object.
● Do not allow plastic film, erasers, or adhesive tape to touch the paper
for long periods.
● Do not stack the thermal paper with diazo copies immediately
after copying or wet-type copies.
● Do not use chemical glue.
● Always use the clean thermal paper.

WSP-i350 Rev. 3.0
http://www.woosim.com
5
¦ Note
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
These equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception , which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following
measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.

WSP-i350 Rev. 3.0
http://www.woosim.com
6
CONTENTS
1. Outline. .........................................................................................................................................8
1.1. Model classifications. .......................................................................................................8
1.2 Product Part Number System ..........................................................................................8
1.3. Specifications. ....................................................................................................................9
2. Setting up the printer. ............................................................................................................11
2.1. Printer & Accessories ..................................................................................................... 11
2.2. Printer Features ...............................................................................................................12
2.3. Dimensions .......................................................................................................................13
2.4. Replacing paper roll........................................................................................................14
2.5. Power supply ....................................................................................................................15
2.5.1. Specified power supply.......................................................................................15
2.5.2. Installing the battery ...........................................................................................15
2.5.3. Recharging the battery pack..............................................................................16
2.6. Set operation mode .......................................................................................................17
2.7. Confirmation of the Wireless-LAN information ........................................................20
2.7.1. MAC Address printing .........................................................................................20
2.7.2. Confirmation of the Wireless-LAN setting information ................................20
3. Interface ......................................................................................................................................21
3.1. UART(RS-232C or TTL) & USB ......................................................................................21
3.2. Infrared data communication .......................................................................................23
3.3. Bluetooth ..........................................................................................................................24
3.4. Wireless LAN ....................................................................................................................24
4. Using the printer ......................................................................................................................25
4.1. Control panel. ..................................................................................................................25
4.2. The self test ......................................................................................................................26
4.3. Using the Accessory .......................................................................................................26
4.3.1. Using the Shoulder strap....................................................................................26
4.3.2. Using the Belt clip ...............................................................................................27
5. Consumable Parts. ...................................................................................................................28

WSP-i350 Rev. 3.0
http://www.woosim.com
7
5.1. Recommended paper. ....................................................................................................28
5.2. Printing position. .............................................................................................................28

WSP-i350 Rev. 3.0
http://www.woosim.com
8
1
1. . O Ou ut tl li in ne e. .
1
1. .1 1. . M Mo od de el l c cl la as ss si if fi ic ca at ti io on ns s. .
1
1. .2 2 P Pr ro od du uc ct t P Pa ar rt t N Nu um mb be er r S Sy ys st te em m
WSP-i350 ( ) ( )
Model
Interface
A1 : UART/Bluetooth
(Standard)
Power
None : DC 8.4V
Model name / Interface Spec.
Example) 1. Porti-S40 Serial/Bluetooth Part No. ⇒ S40/A1
2. Porti-SC30 Bluetooth Only Part No. ⇒ SC30/Z1
S40
SC30
W25
.
.
.
Wired
Wireless
A
RS-232C
1
Bluetooth
B
TTL
2
IrDA
C
USB
3
Wireless LAN
D
RS-485
0
None
E
Parallel
Z
None

WSP-i350 Rev. 3.0
http://www.woosim.com
9
1
1. .3 3. . S Sp pe ec ci if fi ic ca at ti io on ns s. .
Item
Specifications
Print method
Direct thermal line printing
Characters per line
64cpl (MAX)
Character size
Eng: 9*24dots, 12*24dots Kor: 16*24dots, [24*24dots]
Optional
Characters
Simplified/Traditional Chinese, Arabic, Cyrillic, Russian,
Tukish, Greek, Japanese, Persian, Latin9 and
Others upon request.
Resolution
203dpi, 8dots/mm
Print width
3-inch (72mm, 576dots)
Print speed
80mm / sec (MAX)
Dimension
120 * 130.5* 58.3 mm
Weight
560g (Including battery & roll paper) [standard]
566g (Including battery & roll paper) [MSR option]
Interface
UART(RS-232C or TTL), Bluetooth Ver 2.1 + EDR,
IrDA Ver1.0(SIR)[option], USB[option]
Wireless LAN interface(IEEE802.11b/g) [option]
Paper roll
Thermal roll paper (80mm wide, 50ø)
Barcodes
1-dimension : Code128, Code39, I2/5, Code93 UPC, EAN,
KAN, JAN, CODABAR
2-dimension : PDF417, QR Code, DATA Matrix
Driver
Microsoft Widows XP / VISTA / 7
Windows CE, Linux, Android OS driver compatible
Black mark
Support black mark detection
H/W Spec
MCU : 32bits RISC, FLASH : 4M bytes, RAM : 8M bytes
Receive buffer size
1M bytes
MSR [option]
ISO 7810 / 7811 / 7812 1&2 or 2&3 Track Reading
LCD
128×32 Dots FSTN (Blue LED Backlight)
Battery
Rechargeable 7.4V DC, 1,800mAh (Li-ion)
( Continue… )

WSP-i350 Rev. 3.0
http://www.woosim.com
10
Item
Specifications
Battery duration
1 hour continuous printing
Battery charger
Input (100~250V AC, 50~60Hz)
Output(8.4VDC/0.8A), 4hours full charge time
Environment
conditions
Temperature
-10°C ~ 50°C (operating)
-10°C ~ 70°C (storage)
Humidity
30% - 80% (operating)
10% - 90% (storage)
MCBF(Mean Cycle
Between Failure)
Mechanical
37,000,000 lines
Head
Approximately 50 Km
< Table 1 >

WSP-i350 Rev. 3.0
http://www.woosim.com
11
2
2. . S Se et tt ti in ng g u up p t th he e p pr ri in nt te er r. .
2
2. .1 1. . P Pr ri in nt te er r & & A Ac cc ce es ss so or ri ie es s
Your printer box should include these items. If any items are damaged or
missing, please contact your dealer for assistance.
WSP-i350
Battery Pack
▼ OPTIONAL
Communication cable
Shoulder strap
MSR
Thermal roll paper
Battery charger adaptor
Belt clip

WSP-i350 Rev. 3.0
http://www.woosim.com
12
2
2. .2 2. . P Pr ri in nt te er r F Fe ea at tu ur re es s
▶ Part Name

WSP-i350 Rev. 3.0
http://www.woosim.com
13
2
2. .3 3. . D Di im me en ns si io on ns s

WSP-i350 Rev. 3.0
http://www.woosim.com
14
2
2. .4 4. . R Re ep pl la ac ci in ng g p pa ap pe er r r ro ol ll l. .
1. Make sure that the printer is not receiving data; otherwise, data may be lost.
2. Open the paper cover as the “One-Touch” way by pressing the button in the arrow
direction like the picture.
3. Insert a new paper roll as shown.
4. Tear the excess paper off using the edge of paper door as a tear bar.
Note : Be sure to use paper rolls that meet the specifications.
Do not use paper rolls that have the paper glued to the core because the
printer can not detect the paper end correctly.

WSP-i350 Rev. 3.0
http://www.woosim.com
15
2
2. .5 5. . P Po ow we er r s su up pp pl ly y
2
2. .5 5. .1 1. . S Sp pe ec ci if fi ie ed d p po ow we er r s su up pp pl ly y
2
2. .5 5. .2 2. . I In ns st ta al ll li in ng g t th he e b ba at tt te er ry y
① To install battery pack, proceed as follows:
Insert the battery in the arrow direction and make sure the lock completed
② Reverse the order to remove the battery pack.
The following specification is requested for Power supply.
Battery Charger : DC 8.4V/0.8A
Avoid using power supply which its power capacity of power current is extremely high.
NOTE : ● Before installing or removing the battery pack, ensure the
printer is OFF.
● If the printer is not used for long period of time, remove the
battery pack from the printer.

WSP-i350 Rev. 3.0
http://www.woosim.com
16
2
2. .5 5. .3 3. . R Re ec ch ha ar rg gi in ng g t th he e b ba at tt te er ry y p pa ac ck k
For recharging the battery pack, install the battery pack in the printer.
Insert the Battery Charger to the charge connector of the printer.
NOTE : ● While charging the printer, turn off the printer power.
● Do not remove the battery during charging.
● The battery is consumable parts and when purchasing, compared to
the use hour is gradually decreases. (Warranty 6 month)
● If the printer is not used for a long time, unplug the power cord
from the printer and outlet.
● The recharging time depends on the voltage level and ambient
temperature of the battery. Normally, if takes about 4 to 5 hours to
recharge a battery pack.
● You must use only the supplied adapter.
● Red Lamp : charging the battery.
Green Lamp: charging is finished.

WSP-i350 Rev. 3.0
http://www.woosim.com
17
2
2. .6 6. . S Se et t o op pe er ra at ti io on n m mo od de e
In keeping on pressing the Feed and Power button simultaneously until after the ERROR
lamp blinks 5 times, the printer comes out at the circumstance to change the printer mode.
(refer Table 2)
l FEED button : changing Printer MODE status.
l POWER button : changing OPTION status.
[Example] The defaults of the printer are :
UART / 9600 bps / 8 data bit / No parity /1 stop bit / Density low /
Quality low / Mark use / Sensor low / Power down 5 minute
If a user wants to modify the defaults with
Bluetooth / 57,600 bps / 7 data bit / Odd parity /2 stop bit / Density high /
Quality high/ Mark no use / Sensor medium1 / Power down no use
u Press MODE & POWER Button during the Error Lamp flickers 5 times.
® You will see present COMMUNICATION mode in the LCD. (UART)
® Press the POWER Button twice. And then, interface mode has set to
Bluetooth mode.
u When you press FEED button once.
® You will see present BAUD RATE mode in the LCD. (9600 bps)
® Press POWER Button 3 times. And then, BAUD RATE has set to 57,600 bps.
u When you press FEED button once.
® You will see present DATA BIT mode in the LCD. (8 Data bit)
® Press POWER Button once. And then Data Bit has set to 7 DATA BIT.
u When you press FEED button once.
® You will see present PARITY mode in the LCD. (No parity)
® Press POWER Button once. And then the Parity bit has set to ODD Parity Bit..
u When you press FEED button once.
® You will see present STOP BIT mode in the LCD. (1 stop bit)
® Press POWER Button once. And then the density has set to 2 Stop bit.

WSP-i350 Rev. 3.0
http://www.woosim.com
18
u When you press FEED button once.
® You will see present DENSITY mode in the LCD. (Density low)
® Press POWER Button twice. And then the density has set to Density high.
u When you press FEED button once.
® You will see present Quality mode in the LCD. (Low)
® Press POWER Button once. And then the quality has set to Quality high.
u When you press FEED button once.
® You will see present MARK mode in the LCD. (Use)
® Press POWER Button once. And then the mark has set to Mark no use.
u When you press FEED button once.
® You will see present SENSOR mode in the LCD. (Low)
® Press POWER Button once. And then the sensor has set to
Sensor medium1.
u When you press FEED button once.
® You will see present POWER DOWN mode in the LCD. (5 minutes)
® Press POWER Button once. And then the Power down has set to
Power down no use.
If all the mode have set, press the POWER Button and the FEED Button
at the same time. After then release the buttons at the same time.
Bluetooth / 57600bps / 7 data bit / Odd parity / 2 stop bit / Density high
/ High/No use / Medium 1 / No use

WSP-i350 Rev. 3.0
http://www.woosim.com
19
MODE
OPTION
IrDA
Bluetooth
WLAN
Communication
Port
UART(RS-232C)
UART(RS-232C)
UART(RS-232C)
Protocol UART
(RS-232C)
Protocol UART
(RS-232C)
Protocol UART
(RS-232C)
Raw IrDA
Bluetooth
WLAN
Protocol IrDA
Protocol
Bluetooth
Protocol WLAN
Standard IrDA
Baud Rate
9600 bps
19200 bps
38400 bps
57600 bps
115200 bps
Data Bit
7 Data bit
8 Data bit
Parity Bit
No Parity
Odd Parity
Even Parity
Stop Bit
1 Stop bit
2 Stop bit
Density
Density Low
Density Medium
Density High
Quality
Low
High
Mark
No use
Use
Continue…

WSP-i350 Rev. 3.0
http://www.woosim.com
20
2
2. .7 7. . C Co on nf fi ir rm ma at ti io on n o of f t th he e W Wi ir re el le es ss s- -L LA AN N i in nf fo or rm ma at ti io on n
2
2. .7 7. .1 1. . M MA AC C A Ad dd dr re es ss s p pr ri in nt ti in ng g
2
2. .7 7. .2 2. . C Co on nf fi ir rm ma at ti io on n o of f t th he e W Wi ir re el le es ss s- -L LA AN N s se et tt ti in ng g i in nf fo or rm ma at ti io on n
MODE
OPTION
Sensor
Low
Medium1
Medium2
High
Power Down
No use
1 minute
2 minute
3 minute
4 minute
5 minute
< Table 2 >
u MAC address which is set to the printer can be printed out in pressing the Power
and Feed button simultaneously and taking off them shortly after the ERROR lamp
blinks
u Press the Power button in the printer turning on
As the Power lamp turns on, MAC Address is indicated.
u IP Address on LCD is indicated in pressing the Power button once again
u Subnet mask on LCD is indicated in pressing the Power button once again
u Gateway IP on LCD is indicated in pressing the Power button once again
u DNS sever IP on LCD is indicated in pressing the Power button once again
※ Since the configuration of Wireless LAN can not be done with the printer in
person, you are required to use the Wireless LAN-setting program which
WOOSIM offers