WOOSIM WSP-T280 User manual

http://www.woosim.com
MODEL WSP-T280
WOOSIM SYSTEMS Inc.
(#501, Daerung Technotown 3th)
115, Gasan digital 2-ro, Geumcheon-gu,
Seoul, 153-772 Rep. of KOREA
Tel : [phone]
Fax : [phone]
URL: http://www.woosim.com
(Kiosk&Ticket Printer)
Rev. 1.2
All specifications are subjected to change without notice

T280 Rev. 1.2
http://www.woosim.com
2
 Copyright
WSP-T280 2inch Kiosk/Ticket printer operator’s manual.
Copyright ⓒ2015 by Woosim Systems Inc.
All rights reserved.
The information contained in this manual is the property of Woosim Systems Inc.
And may not be reproduced in whole or in part without the prior written
permission of Woosim Systems Inc.
 Trademark
a registered trademark of Woosim Systems Inc.
All other trademark are the properties of their respective companies.
 Caution
Some semiconductor devices are easily damaged by static electricity. You should
turn the printer “OFF”, before you connect or removed the cable on the rear side,
in order to guard the printer against the static electricity.
If the printer is damaged by the static electricity, you should turn the printer “OFF”.
 Notice
The contents of this manual are subject to change without notice.

T280 Rev. 1.2
http://www.woosim.com
3
 Introduction
The WSP-T280 printer is the ideal solution for kiosk, Ticket vending machines
and receipt output for vending machines, ATM, etc.
The general features of WSP-T280 printer are as follows:
Very silent printing thru direct thermal printing method.
High speed(200mm/sec, MAX)
High resolution(203dpi : 8dots/mm).
UART(RS-232C or TTL), USB(option) Interface
Low power consumption.
Auto cutting.
Supports text and graphic printing.
Easier maintenance with self-diagnostics.
In field programming –Update Firmware, Download Fonts and Logos
Microsoft Windows XP/VISTA/7/8/CE, Linux, Android compatible compatible.
Flow control : Software (XON/XOFF)
※Hardware flow control not supported in printer.
Agency Approvals

T280 Rev. 1.2
http://www.woosim.com
4
 Operating Precautions
Please follow the precautions below to enjoy and maintain the full performance of
the printer.
Using the Printer
● Be careful not to drop or bump the printer on a hard surface.
● Do not install the printer in direct sunlight or such areas.
Suitable environment for the use of the printer is as follows:
◆ Operating temperature : -10°C to 50°C
◆ Relative humidity : 30% to 80%
● Do not install the printer near devices that generate strong
electromagnetic fields such as a copy machine.
● Do not open the platen cover during printing .
● Do not remove or reinstall the communication cable during printing
or transmission.
● Do not touch the connectors of the communication during printing.
● POWER OFF when not in use.
● Do not use other solvent.
Thermal Paper Handling
● Store the thermal paper in a cool, dry and dark place.
● Do not rub the paper with hard object.
● Do not leave the paper with hard object.
● Do not allow plastic film, erasers, or adhesive tape to touch the paper
for long periods.
● Do not stack the thermal paper with diazo copies immediately
after copying or wet-type copies.
● Do not use chemical glue.
●Always use the clean thermal paper.

T280 Rev. 1.2
http://www.woosim.com
5
CONTENTS
1. Outline ................................................................................................................................... 6
1.1. Model classifications................................................................................................... 6
1.2. Product Part Number System.................................................................................... 6
1.3. Specifications ............................................................................................................... 7
2. Setting up the printer......................................................................................................... 8
2.1. Printer & Accessories.................................................................................................. 8
2.2. Printer Features ........................................................................................................... 9
2.3. Dimensions................................................................................................................. 11
2.4. Replacing the paper roll........................................................................................... 12
2.5. Power Supply............................................................................................................. 14
2.5.1. Specified Power supply.................................................................................. 14
2.5.2. Power connector............................................................................................. 14
2.6. Sensor......................................................................................................................... 15
2.6.1. Sensor connector............................................................................................ 15
3. Interface............................................................................................................................... 16
3.1. UART (RS-232C or TTL) & USB................................................................................ 16
4. Using the printer................................................................................................................ 17
4.1. Control panel............................................................................................................. 17
4.2. The self test ............................................................................................................... 17
5. Consumable Parts.............................................................................................................. 18
5.1. Recommended paper ............................................................................................... 18
5.2. Printing position........................................................................................................ 18
6. Revision History ................................................................................................................. 19

T280 Rev. 1.2
http://www.woosim.com
6
1
1. . O Ou ut tl li in ne e
1
1. .1 1. . M Mo od de el l c cl la as ss si if fi ic ca at ti io on ns s
1
1. .2 2. . P Pr ro od du uc ct t P Pa ar rt t N Nu um mb be er r S Sy ys st te em m
WSP-T280 ( ) ( )
Model name
Interface
A0 : UART
Power
None : DC 24V
Model name / Interface Spec.
Example) 1. Porti-S40 Serial/Bluetooth Part No. ⇒S40/A1
2. Porti-SC30 Bluetooth Only Part No. ⇒SC30/Z1
Note) The above table is the interface format which is supported.
But some of the interfaces are not supported according to the product
and please contact us, if you have any questions regarding the interface.
S40
SC30
W25
.
.
.
Wired
Wireless
A
RS-232C
1
Bluetooth
B
TTL
2
IrDA
C
USB
0
None
D
RS-485
E
Parallel
Z
None

T280 Rev. 1.2
http://www.woosim.com
7
1
1. .3 3. . S Sp pe ec ci if fi ic ca at ti io on ns s
Item
Specification
Print method
Direct thermal line printing
Character size
- Font Size A: 12X24 / Font Size B : 9X24 / Font Size C : 8X16
- KOR : 24X24(16X24) / CHN, JPN : 24X24
Characters per line
- Font A : 32cpl / Font B : 42cpl / Font C : 48cpl
- KOR, CHN, JPN : 16cpl
Optional Characters
Alphanumeric:95, Extended Graphics:128X31 pages, International:10,
Simplified/Traditional Chinese, Japanese, Korean
Resolution
203dpi, 8dots/mm
Print width
2-inch (48mm, 384dots)
Printing speed
200mm/sec (MAX)
Dimensions
169 X 87.5 X 103mm
Weight (except roll paper)
784g
Interface
UART(RS-232C or TTL), USB(option)
Paper supplied
Thermal roll paper (60mm wide/ 80ø, 200ø-option)
Barcodes
1-dimension : UPC-A, UPC-E, EAN-8, EAN-13, CODE-39, CODE-93,
CODE-128, ITF, CODABAR
2-dimension : PDF417, Micro PDF417, Truncated PDF417, QR-CODE,
DATA Matrix, Maxicode
Etc :GS1 databar
Driver
Microsoft Windows XP/VISTA/7/8/CE, Linux, Android compatible
H/W spec
MCU : RX-32bit, RAM : 128M bit, FLASH : 64M bit
Receive buffer size
1M bytes
Input Power
24VDC, 3A OVER
Option
Sliding mount assembly
Environment conditions
Temperature
-10 °C ~ 50°C (operating)
-10°C ~ 70°C (storage)
Humidity
30% - 80% (operating)
10% - 90% (storage)
MCBF (Mean Cycle
Between failure)
Mechanical
37,000,000 lines
Head
Approximately 50 Km
<Table 1 >

T280 Rev. 1.2
http://www.woosim.com
8
2
2. . S Se et tt ti in ng g u up p t th he e p pr ri in nt te er r
2
2. .1 1. . P Pr ri in nt te er r & & A Ac cc ce es ss so or ri ie es s
When unpacking your printer box make sure it contains the printer and all
accessories.
If any accessories are missing or damage, please contact your dealer for assistance.
WSP-T280
Thermal roll paper
SHAFT

T280 Rev. 1.2
http://www.woosim.com
9
2
2. .2 2. . P Pr ri in nt te er r F Fe ea at tu ur re es s

T280 Rev. 1.2
http://www.woosim.com
10
Connecting Ground Cable to Ground(0V) or to the land,
if Ground Cable is not correctly connected, it will cause malfunctioning or
the printer will be damaged.