WOOSIM WSP-BT200 User manual

http://www.woosim.com
MODEL WSP-BT200
(Kiosk&Ticket Printer)
Rev. 3.1
All specifications are subjected to change without notice

BT200 Rev. 3.1
http://www.woosim.com
2
 Copyright
WSP-BT200 2inch Kiosk/Ticket printer operator’s manual.
Copyright ⓒ2018 by Woosim Systems Inc.
All rights reserved.
The information contained in this manual is the property of Woosim Systems Inc.
And may not be reproduced in whole or in part without the prior written permission of Woosim
Systems Inc.
 Trademark
a registered trademark of Woosim Systems Inc.
All other trademark are the properties of their respective companies.
 Caution
Some semiconductor devices are easily damaged by static electricity. You should turn the printer
“OFF”, before you connect or removed the cable on the rear side, in order to guard the printer
against the static electricity.
If the printer is damaged by the static electricity, you should turn the printer “OFF”.
 Notice
The contents of this manual are subject to change without notice.

BT200 Rev. 3.1
http://www.woosim.com
3
 Introduction
150mm/sec high-speed printer. The 2inch thermal panel printer is most suitable for ticketing
applications, such as transportation, coupons, industrial machine, lottery, ATM and kiosks.
The general features of WSP-BT200 printer are as follows:
Very silent printing thru direct thermal printing method.
High speed(150mm/sec, MAX)
High resolution(203dpi : 8dots/mm).
UART(RS-232C or TTL) Interface
Low power consumption.
Auto cutting.
Supports text and graphic printing.
Printer door open & Paper-out sensor
Easy paper handling
Easier paper roll loading by CLAMSHELL design.
Easier maintenance with self-diagnostics.
In field programming –Update Firmware, Download Fonts and Logos
Microsoft Windows/Windows CE, Linux, Android compatible
Flow control : Software (XON/XOFF)
※Hardware flow control not supported in printer.

BT200 Rev. 3.1
http://www.woosim.com
4
 Operating Precautions
Please follow the precautions below to enjoy and maintain the full performance of the printer.
Using the Printer
● Be careful not to drop or bump the printer on a hard surface.
● Do not install the printer in direct sunlight or such areas.
Suitable environment for the use of the printer is as follows:
◆ Operating temperature : -10°C to 50°C
◆ Relative humidity : 30% to 80%
● Do not install the printer near devices that generate strong electromagnetic fields such as a copy
machine.
● Do not open the platen cover during printing .
● Do not remove or reinstall the communication cable during printing or transmission.
● Do not touch the connectors of the communication during printing.
● POWER OFF when not in use.
● Do not use other solvent.
Thermal Paper Handling
● Store the thermal paper in a cool, dry and dark place.
● Do not rub the paper with hard object.
● Do not leave the paper with hard object.
● Do not allow plastic film, erasers, or adhesive tape to touch the paper for long periods.
● Do not stack the thermal paper with diazo copies immediately after copying or wet-type copies.
● Do not use chemical glue.
●Always use the clean thermal paper.

BT200 Rev. 3.1
http://www.woosim.com
5
CONTENTS
1. Outline ................................................................................................................................................................. 6
1.1. Model classifications................................................................................................................................. 6
1.2. Product Part Number System.................................................................................................................. 6
1.3. Specifications ............................................................................................................................................. 7
2. Setting up the printer....................................................................................................................................... 8
2.1. Printer & Accessories................................................................................................................................ 8
2.2. Printer Features ......................................................................................................................................... 9
2.3. Dimensions................................................................................................................................................10
2.4. Replacing the paper roll..........................................................................................................................11
2.5. Power Supply............................................................................................................................................12
2.5.1. Specified Power supply.................................................................................................................12
2.5.2. Power connector............................................................................................................................12
2.6. Sensor........................................................................................................................................................13
3. Interface..............................................................................................................................................................14
3.1. UART (RS-232C or TTL)............................................................................................................................14
4. Using the printer...............................................................................................................................................15
4.1. Control panel............................................................................................................................................15
4.2. The self test ..............................................................................................................................................15
5. Consumable Parts.............................................................................................................................................16
5.1. Recommended paper ..............................................................................................................................16
5.2. Printing position.......................................................................................................................................16
6. Revision History ................................................................................................................................................17

BT200 Rev. 3.1
http://www.woosim.com
6
1
1. . O Ou ut tl li in ne e
1
1. .1 1. . M Mo od de el l c cl la as ss si if fi ic ca at ti io on ns s
1
1. .2 2. . P Pr ro od du uc ct t P Pa ar rt t N Nu um mb be er r S Sy ys st te em m
WSP-BT200 ( ) ( )
Model name
Interface
A0 : UART
Power
None : DC 24V
Model name / Interface Spec.
Example) 1. Porti-S40 Serial/Bluetooth Part No. ⇒S40/A1
2. Porti-SC30 Bluetooth Only Part No. ⇒SC30/Z1
Note) The above table is the interface format which is supported.
But some of the interfaces are not supported according to the product
and please contact us, if you have any questions regarding the interface.
S40
SC30
W25
.
.
.
Wired
Wireless
A
RS-232C
1
Bluetooth
B
TTL
2
IrDA
C
USB
0
None
D
RS-485
E
Parallel
Z
None

BT200 Rev. 3.1
http://www.woosim.com
7
1
1. .3 3. . S Sp pe ec ci if fi ic ca at ti io on ns s
Item
Specification
Print method
Direct thermal line printing
Character size
- Font Size A: 12X24 / Font Size B : 9X24 / Font Size C : 8X16
- KOR : 24X24(16X24) / CHN, JPN : 24X24
Characters per line
- 49cpl (MAX)
- KOR, CHN, JPN : 16cpl
Optional Characters
Alphanumeric:95, Extended Graphics:128X31 pages, International:10,
Simplified/Traditional Chinese, Japanese, Korean
Resolution
203dpi, 8dots/mm
Print width
2-inch (56mm, 448dots)
Paper supplied
60 - 0.5 mm wide (Thermal roll paper)
Paper thickness : 60±5㎛
Printing speed
150mm/sec (MAX)
Dimensions
99.8 X 87.1 X 86.3 (111.5) mm
Weight (w/o paper)
533g
Interface
UART (RS-232C or TTL)
Barcodes
1-dimension : Code128, Code39, I2/5, Code93, UPC-A, UPC-E, EAN8,
EAN13, CODABAR
2-dimension : PDF417, QR Code, DATA Matrix, Micro PDF417,
Truncated PDF417
Black mark
Support black mark detection
Driver
Microsoft Windows, Linux
H/W spec
MCU : 32bits RISC, FLASH : 4Mbytes, RAM : 8Mbytes
Receive buffer size
1M bytes
Input Power
24VDC, 3A(RMS current)
[According to the power supplying condition which is sent to a printer,
inrush current would occur.]
Environment
conditions
Temperature
-10 °C ~ 50°C (operating)
-10°C ~ 70°C (storage)
Humidity
30% - 80% (operating)
10% - 90% (storage)
MCBF (Mean Cycle
Between failure)
Mechanical
37,000,000 lines
Head
Approximately 50 Km
<Table 1 >

BT200 Rev. 3.1
http://www.woosim.com
8
2
2. . S Se et tt ti in ng g u up p t th he e p pr ri in nt te er r
2
2. .1 1. . P Pr ri in nt te er r & & A Ac cc ce es ss so or ri ie es s
When unpacking your printer box make sure it contains the printer and all accessories.
If any accessories are missing or damage, please contact your dealer for assistance.
WSP-BT200

BT200 Rev. 3.1
http://www.woosim.com
9
2
2. .2 2. . P Pr ri in nt te er r F Fe ea at tu ur re es s
Connecting Ground Cable to
Ground(0V) or to the land, if Ground
Cable is not correctly connected, it
will cause malfunctioning or the
printer will be damaged.

BT200 Rev. 3.1
http://www.woosim.com
10
2
2. .3 3. . D Di im me en ns si io on ns s

BT200 Rev. 3.1
http://www.woosim.com
11
2
2. .4 4. . R Re ep pl la ac ci in ng g t th he e p pa ap pe er r r ro ol ll l
1. Make sure that the printer is not receiving data; otherwise, data may be lost.
2. Remove the used paper roll core if there is one.
3. Insert the paper roll as shown.
Note : Be sure to use paper rolls that meet the specifications.
Do not use paper rolls that have the paper glued to the core because the printer can not
detect the paper end correctly.

BT200 Rev. 3.1
http://www.woosim.com
12
2
2. .5 5. . P Po ow we er r S Su up pp pl ly y
2
2. .5 5. .1 1. . S Sp pe ec ci if fi ie ed d P Po ow we er r s su up pp pl ly y
2
2. .5 5. .2 2. . P Po ow we er r c co on nn ne ec ct to or r
The following specifications are requested for Power supply.
INPUT POWER : 24VDC, 3A(RMS current)
* According to the power supplying condition which is sent to a printer,
inrush current would occur.
* Avoid using power supply which its power capacity of power current is extremely high.
.
The WSP-T280 printer is equipped to an external supply electrical power.
The functions assigned to the pins in the connector are as follows:
Applicable connector : MOLEX 53014-0410 or equivalent.
WARNING
A wrong connection of power supply
connector could be damage the
printer.

BT200 Rev. 3.1
http://www.woosim.com
13
2
2. .6 6. . S Se en ns so or r
① Sensor 1 : Paper Out Sensor
When using the general thermal paper, the sensor which detects the exhaust
presence of the paper.
②Sensor 2 : Black Mark Sensor
When using label paper etc., is detected with the black mark sensor.
③Sensor 3 : Roll-End Sensor
Detects the remainder condition of the paper.

BT200 Rev. 3.1
http://www.woosim.com
14
3
3. . I In nt te er rf fa ac ce e
3
3. .1 1. . U UA AR RT T ( (R RS S- -2 23 32 2C C o or r T TT TL L) )
The WSP-BT200 printer has a UART(RS-232C or TTL) interface and is connected by means of a 3pin
male connector.
In the following table, the signals present on the connector are listed:
Pin No
Name
Direction
Function
3
TxD
Output
Transmit Data
2
RxD
Input
Receive Data
1
GND
-
Ground
<Molex : 51004-03P>
Applicable connector : MOLEX 53014-03P or equivalent.
#3
#2
#1

BT200 Rev. 3.1
http://www.woosim.com
15
4
4. . U Us si in ng g t th he e p pr ri in nt te er r
4
4. .1 1. . C Co on nt tr ro ol l p pa an ne el l
4
4. .2 2. . T Th he e s se el lf f t te es st t
Button
- FEED Button :
When the printer is on, paper can be feed manually by pressing and
holding the FEED button for more than one second.
- CUTTER Button :
Cutter Button is used when once cutting the paper.
LAMP
- POWER lamp(GREEN) :Printer is ON and ready to receive data.
- ERROR lamp(RED) : Indicated a fault condition or a printer error.
(details: no paper, paper cover opened. etc.)
Self-Test prints out the current setting value of printer. The way of self-test is as follows.
1. Insert proper paper into the printer.
2. Power on while pressing feed button to start self-test.
3. Printer will print out the current status. (F/W version and set contents)
4. And then pattern of characters will be printed out.
5. Self-test will be finished automatically and turned to the standby status.
※In case printer does not work properly, please contact Woosim customer service center.

BT200 Rev. 3.1
http://www.woosim.com
16
5
5. . C Co on ns su um ma ab bl le e P Pa ar rt ts s
5
5. .1 1. . R Re ec co om mm me en nd de ed d p pa ap pe er r
5
5. .2 2. . P Pr ri in nt ti in ng g p po os si it ti io on n
Type : Thermal Paper
Paper width : 60mm
Paper thickness : 60±5㎛
Recording side : Outside of roll
Cautions
1. Do not paste the paper to the core. And the roll paper which has near end mark
printing on its near end is recommended.
2. Chemicals or oil may change the color of paper, or printed characters may fade.
3. Change of paper color starts from approx. 70℃.
Pay attention to heat, humidity and sun light.
4. Color of paper may be changed by being scratched by nail or hard metal, etc.

BT200 Rev. 3.1
http://www.woosim.com
17
6
6. . R Re ev vi is si io on n H Hi is st to or ry y
Date
Version
Comments
Aug. 23. 2018
3.1
Renewal (B5->A4)