WOOSIM WSP-BT200 User manual

MODEL W S P - B T 2 0 0
(Kiosk & Ticket Printer)
All specifications are subjected to change without notice
Megatron S.A.R.L - 451 route des Blaves - Z.I de Noyer
74200 ALLINGES - FRANCE
+33 (0)4.50.70.54.54
http://www.megatron.fr

2
¦ Introduction
150mm/sec high-speed printer. The 2inch thermal panel printer is most suitable
for ticketing applications, such as transportation, coupons, industrial machine,
lottery, ATM and kiosks.
The general features of WSP-BT200 printer are as follows:
u Very silent printing thru direct thermal printing method.
u High speed(150mm/sec, MAX)
u High resolution(203dpi : 8dots/mm).
u Low power consumption.
u UART(RS-232C) Interface
u Supports text and graphic printing.
u Easier paper roll loading by CLAMSHELL design.
u Printer door open & Paper-out sensor
u Easy paper handling
u Auto cutting.
u Easier maintenance with self-diagnostic.
u In field programming – Update Firmware, Download Fonts and Logos
u Microsoft Windows XP / VISTA / 7 /
Windows CE / Linux / Android / Blackberry compatible.
u Flow control : Software (XON/XOFF)
※ Hardware flow control not supported in printer.
u Agency Approvals

3
¦ Operating Precautions
Please follow the precautions below to enjoy and maintain the full
performance of the printer.
u Using the Printer
● Be careful not to drop or bump the printer on a hard surface.
● Do not install the printer in direct sunlight or such areas.
Suitable environment for the use of the printer is as follows:
◆ Operating temperature :-10°C to 50°C
◆ Relative humidity : 10% to 90% (No condensation)
● Do not install the printer near devices that generate strong
electromagnetic fields such as a copy machine.
● Do not open the platen cover during printing .
● Do not remove or reinstall the communication cable during printing
or transmission.
● Do not touch the connectors of the communication during printing.
● Switch the POWER OFF when not in use.
● Do not use alcohol or other solvent.
u Thermal Paper Handling
● Store the thermal paper in a cool, dry and dark place.
● Do not rub the paper with hard object.
● Do not leave the paper with hard object.
● Do not allow plastic film, erasers, or adhesive tape to touch the paper
for long periods.
● Do not stack the thermal paper with diazo copies immediately
after copying or wet-type copies.
● Do not use chemical glue.
● Always use the clean thermal paper.

4
CONTENTS
1. Outline............................................................................................................................................. 5
1.1. Model classifications . ........................................................................................................ 5
1.2. Product Part Number System . ......................................................................................... 5
1.3. Specifications . ..................................................................................................................... 6
2. Setting up the printer . ............................................................................................................... 7
2.1. Printer & Accessories . ....................................................................................................... 7
2.2. Printer Features . ................................................................................................................. 8
2.3. Dimensions . ......................................................................................................................... 9
2.4. Replacing the paper roll . ................................................................................................ 10
2.5. Power Supply . ................................................................................................................... 11
2.5.1. Power connector . .................................................................................................. 11
2.5.2. Specified Power supply . ....................................................................................... 11
2.6. Sensor.................................................................................................................................. 12
3. Interface . ....................................................................................................................................... 13
3.1. UART (RS-232C or TTL) . .................................................................................................. 13
4. Using the printer . ...................................................................................................................... 14
4.1. Control panel . ................................................................................................................... 14
4.2. The self test . ...................................................................................................................... 15
5. Consumable Parts . .................................................................................................................... 16
5.1. Recommended paper . ..................................................................................................... 16
5.2. Printing position . .............................................................................................................. 16
6. Revision History . ....................................................................................................................... 17

5
1
1
.
.
O
O
u
u
t
t
l
l
i
i
n
n
e
e
1
1
.
.
1
1
.
.
M
M
o
o
d
d
e
e
l
l
c
c
l
l
a
a
s
s
s
s
i
i
f
f
i
i
c
c
a
a
t
t
i
i
o
o
n
n
s
s
1
1
.
.
2
2
.
.
P
P
r
r
o
o
d
d
u
u
c
c
t
t
P
P
a
a
r
r
t
t
N
N
u
u
m
m
b
b
e
e
r
r
S
S
y
y
s
s
t
t
e
e
m
m
WSP-BT200 ( ) ( )
M o d e l n a m e
I n t e r f a c e
None: UART
Power
None : DC 24V
Model name / Interface Spec.
Example) 1. Porti-S40 Serial/Bluetooth Part No. ⇒ S40/A1
2. Porti-SC30 Bluetooth Only Part No. ⇒ SC30/Z1
S40
SC30
W25
.
.
.
Wired
Wireless
A
RS-232C
1
Bluetooth
B
TTL
2
I r D A
C
U S B
0
None
D
RS-485
E
Parallel
Z
None

6
1
1. .3 3. . S Sp pe ec ci if fi ic ca at ti io on ns s
Item
Specification
Printing method Direct thermal line printing
Characters per line 42cpl (MAX)
Character size
Eng. : 9*24dots, 12*24dots Kor. : 16*24dots, [24*24dots]
Optional Characters
Simplified/Traditional Chinese, Arabic, Cyrillic, Russian, Tukish,
Greek, Japanese, Persian, Latin9 and Others upon request.
Resolution
203dpi, 8dots/mm
Print width
2-inch (56mm, 448dots)
Paper width
60 - 0.5 mm wide (Thermal roll paper)
Paper thickness : 60±5 ㎛
Printing speed
150mm / sec (MAX)
Dimensions
99.8 * 87.1 * 86.3 (111.5) mm
Weight
533g (except roll paper)
Interface
UART (RS-232C)
Barcode supplied
1-dimension : Code128, Code39, I2/5, Code93, UPC-A, UPC-E, EAN8,
EAN13, CODABAR
2-dimension : PDF417, QR Code, DATA Matrix,
Micro PDF417, Truncated PDF417
Black mark
Support black mark detection
H/W Spec
MCU : 32bits RISC, FLASH : 4Mbytes, RAM : 8Mbytes
Receive buffer size 1M bytes
Input Power
24VDC, Max 3A
Environment
conditions
Temperature
-10 °C ~ 50°C (operating)
-10°C ~ 70°C (storage)
Humidity
30% - 80% (operating)
10% - 90% (storage)
MCBF (Mean Cycle
Between failure)
Mechanical
37,000,000 lines
Head
Approximately 50 Km
< Table 1 >
Printing method
Character per line
Direct thermal line printing

7
2
2
.
.
S
S
e
e
t
t
t
t
i
i
n
n
g
g
u
u
p
p
t
t
h
h
e
e
p
p
r
r
i
i
n
n
t
t
e
e
r
r
2
2
.
.
1
1
.
.
P
P
r
r
i
i
n
n
t
t
e
e
r
r
&
&
A
A
c
c
c
c
e
e
s
s
s
s
o
o
r
r
i
i
e
e
s
s
When unpacking your printer box make sure it contains the printer and all accessories.
If any accessories are missing or damage, please contact your dealer for assistance.
WSP-BT200

8
2
2
.
.
2
2
.
.
P
P
r
r
i
i
n
n
t
t
e
e
r
r
F
F
e
e
a
a
t
t
u
u
r
r
e
e
s
s
Connecting Ground Cable to
Ground(0V) or to the land,
if Ground Cable is not correctly
connected, it will cause malfunctioning
or the printer will be damaged.

9
2
2
.
.
3
3
.
.
D
D
i
i
m
m
e
e
n
n
s
s
i
i
o
o
n
n
s
s

1 0
2
2
.
.
4
4
.
.
R
R
e
e
p
p
l
l
a
a
c
c
i
i
n
n
g
g
t
t
h
h
e
e
p
p
a
a
p
p
e
e
r
r
r
r
o
o
l
l
l
l
1. Make sure that the printer is not receiving data; otherwise, data may be lost.
2. Remove the used paper roll core if there is one.
3. Insert the paper roll as shown.
Note : Be sure to use paper rolls that meet the specifications.
Do not use paper rolls that have the paper glued to the core because
the printer can not detect the paper end correctly.