Worldline VALINA User manual
VALINA
the next generation
compact, convenient, complete
VALINA product manual
UNRESTRICTED document release 1.2.1
pm_valinaTOC.fm last updated 1/10/19
VALINA
PRODUCT MANUAL
About this book ........................................................................................................... 1
Introduction ................................................................................................................ 3
Technical specifications .............................................................................................5
Accessoriess .............................................................................................................13
Development environment .......................................................................................15
Logistic information .................................................................................................. 17
UNRESTRICTED
document version 1.2.1
pm_valinaTOC.fm
last updated 1/10/19
VALINA
PRODUCT MANUAL
Approvals ................................................................................................................... 21
UNRESTRICTED document release 1.2.1
pm_valinaTOC.fm last updated 1/10/19
VALINA
PRODUCT MANUAL
empty for double-sided printing
VALINA
Product Manual
pm_valinaLOF.fm
UNRESTRICTED document version 1.2.1
last updated 21/5/21
VALINA
PRODUCT MANUAL
empty for double-sided printing
VALINA
Product Manual
pm_valinaLOF.fm
UNRESTRICTED document version 1.2.1
last updated 21/5/21
VALINA
PRODUCT MANUAL
UNRESTRICTED
document version 1.2.1
last updated 21/5/21
VALINA
Product Manual
Figure 1.
UNRESTRICTED document version 1.2.1
last updated 21/5/21
VALINA
PRODUCT MANUAL
Figure 2. General dimensions
101.59
107.5
132.42
85
1 2
3 4
88.00
30.80 44.76
welded studs M4 x 25
1, 2
3, 4
UNRESTRICTED
document version 1.2.1
last updated 21/5/21
VALINA
Product Manual
Figure 3. Indicators, connectors and controls
Hardware ow control (RTC/CTS) is not supported for releases AA, AB and AC. Flow
control for these releases needs to be handled by software.
Ethernet connection 10/100 Mbit, using an RJ45 connector.
USB 2.0 high speed (up to 480 MBit/sec) host interface, which can be used to connect
to a USB stick or other storage device.
USB 2.0 high speed (up to 480 MBit/sec) device interface, which can be used to
connect to ePOS equipment/PC and to perform key loading.
TTL connector Microt 43045 has one output and up to three inputs, and is used to
attach a peripheral to the terminal.
The TTL port can also be used to provide a power supply.
8
SAM1
9
SAM2
7
1 2
5
34
6MDB
R
M
!!
UNRESTRICTED document version 1.2.1
last updated 21/5/21
VALINA
PRODUCT MANUAL
MDB interface supports the MDB 4.2 protocol, for communicating with vending
machines or other devices supporting the standard.
The MDB port can also be used to provide a power supply.
The reset button is used to reset the terminal without unplugging the power. For
application developers, it provides an easy way of rebooting the terminal. The reset
button is slightly recessed to prevent accidental use.
The menu button can be used to activate a menu on the terminal, for example to check
settings.
integrated comms card supporting mobile broadband (GPRS, EDGE, 3G, 4G)
onboard Ethernet interface supporting landline broadband
UNRESTRICTED
document version 1.2.1
last updated 21/5/21
VALINA
Product Manual
Figure 4. Card reading with VALINA
The landing zone for contactless payment is:
The contactless symbol is placed where the signal is strongest, and shows the “landing
zone” where customers should tap the card or device
UNRESTRICTED document version 1.2.1
last updated 21/5/21
VALINA
PRODUCT MANUAL
VALINA contains two internal chip card interfaces (type ID0) for security application
modules (SAM). Both 3V and 5V SAMs can be read. Standard current provided to the
SAMs is 55 mA.
To reach the SAM slots, the telecom cover needs to be opened using a T8 Torx
screwdriver.
There is an installation movie available from the VALINA page on the
System on chip ASIC
UNRESTRICTED
document version 1.2.1
last updated 21/5/21
VALINA
Product Manual
UNRESTRICTED document version 1.2.1
last updated 21/5/21
VALINA
PRODUCT MANUAL
stand-by
Figure 5. Double-pulse timing for wake-up
sleep
Power consumption (watts) for VALINA
UNRESTRICTED
document version 1.2.1
last updated 21/5/21
VALINA
Product Manual
transaction
UNRESTRICTED document version 1.2.1
last updated 21/5/21
VALINA
PRODUCT MANUAL
empty for double-sided printing
VALINA
Product Manual
pm_valinaLOF.fm
Other manuals for VALINA
2
Table of contents
Other Worldline Payment Terminal manuals
Worldline
Worldline Saturn 1000F2 Portable Flex Specification sheet
Worldline
Worldline Self/7000 Quick setup guide
Worldline
Worldline VALINA Quick setup guide
Worldline
Worldline SIX Payment Services YOMANI TOUCH XR User manual
Worldline
Worldline xentissimo User manual
Worldline
Worldline Ingenico Lane/3600 User manual
Worldline
Worldline YOXIMO User manual
Worldline
Worldline YOMANI User manual
Worldline
Worldline Six VALINA Quick setup guide
Worldline
Worldline Yomora User manual
Worldline
Worldline Ingenico Telium TETRA Desk/3500 User manual
Worldline
Worldline VALINA Use and care manual
Worldline
Worldline ingenico Move/5000 User manual
Worldline
Worldline Link/2500 Portable Flex Specification sheet
Worldline
Worldline Link/2500 Portable Flex User manual
Worldline
Worldline Ingenico Telium TETRA Desk/3500 User manual
Popular Payment Terminal manuals by other brands
SmartPay
SmartPay PAX S800 Getting started guide
ANZ
ANZ POS Mobile 2 Quick reference guide
JCM GLOBAL
JCM GLOBAL UBA Series Operation and maintenance manual
VeriFone
VeriFone Vx Series Quick reference guide
VeriFone
VeriFone TRANZ 380 Quick reference guide
Payment Express
Payment Express Colour Mini Vend Hardware guide