Xilinx SP605 FMC Si570 Owner's manual
June 2012
SP605 FMC Si570
Programming
XTP077
© Copyright 2012 Xilinx, Inc. All Rights Reserved.
XILINX, the Xilinx logo, the Brand Window and other designated brands included herein are trademarks of Xilinx, Inc. All other trademarks are the property of
their respective owners.
NOTICE OF DISCLAIMER: The information disclosed to you hereunder (the “Information”) is provided “AS-IS” with no warranty of any kind, express or implied.
Xilinx does not assume any liability arising from your use of the Information. You are responsible for obtaining any rights you may require for your use of this
Information. Xilinx reserves the right to make changes, at any time, to the Information without notice and at its sole discretion. Xilinx assumes no obligation to
correct any errors contained in the Information or to advise you of any corrections or updates. Xilinx expressly disclaims any liability in connection with technical
support or assistance that may be provided to you in connection with the Information. XILINX MAKES NO OTHER WARRANTIES, WHETHER EXPRESS,
IMPLIED, OR STATUTORY, REGARDING THE INFORMATION, INCLUDING ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, OR NONINFRINGEMENT OF THIRD-PARTY RIGHTS.
Revision History
Date Version Description
06/15/12 1.0 Initial version for 13.4.
SP605 FMC Si570 Programming Overview
Xilinx SP605 Board
Software Requirements
Setup for the SP605 FMC Si570 Programming
Programming the FMC Si570
Correcting the Frequency
FMC Si570 Fixed Frequencies
References
Note: This presentation applies to the SP605
SP605 FMC Si570 Programming Overview
Description
–The FMC modules, XM101, XM104, and XM105 have a Silicon Labs Si570
Programmable Oscillator that defaults to 156.25 MHz. Via the IIC bus, the
frequency of this device can be changed. This tutorial shows how to change
the output frequency of this device.
Note: Presentation applies to the SP605
Xilinx SP605 Board
Note: Presentation applies to the SP605
Xilinx XM101 FMC Module
The XM101 board uses an
on-board IIC switch
Xilinx XM104 FMC Module
The XM104 board has
an on-board IIC switch
–Note: The XM104
Si570 clocks (as seen
below) are only
available via GBT; the
designs in this tutorial
only look at the non-GT
clocks
Xilinx XM105 FMC Module
The XM105 board has
a direct connection to
the Si570 IIC
–Note: FMC_TDI and
FMC_TDO (J5, 6 & 7)
must be connected
during configuration
ISE Software Requirements
Xilinx ISE 13.4 software
Note: Presentation applies to the SP605
ChipScope Pro Software Requirement
Xilinx ChipScope Pro 13.4 software
Note: Presentation applies to the SP605
SP605 Setup
Connect a USB Type-A
to Mini-B cable to the
USB UART connector
on the SP605 board
–Connect this
cable to
your PC
SP605 Setup
Add a second USB
Type-A to Mini-B cables
to the USB JTAG
connector on the
SP605 board
–Connect this
cable to
your PC
Power on the
SP605 board for
UART Driver
Install
SP605 Setup
Reboot your PC if necessary
Right-click on My Computer
and select Properties
–Select the Hardware tab
–Click on Device Manager
Note: Presentation applies to the SP605
SP605 Setup
Expand the Ports
Hardware
–Right-click on Silicon Labs
CP210x USB to UART
Bridge and select Properties
Note: Presentation applies to the SP605
SP605 Setup
Under Port Settings tab
–Click Advanced
–Set the COM Port to an open Com Port
setting from COM1 to COM4
Note: Presentation applies to the SP605
SP605 Setup
Board Power must be on before starting Tera Term
Start the Terminal Program
–Select your USB Com Port
–Set the baud to 9600
Note: Presentation applies to the SP605
Setup for SP605 FMC Si570 Programming
Unzip the SP605 FMC Si570 Programming Design Files (13.4 CES) to
your C:\ drive
–Available through http://www.xilinx.com/sp605
Note: Presentation applies to the SP605
SP605 FMC Si570 Programming
Attach your FMC board (XM101 or XM105) to the FMC LPC expansion
port on the SP605
–Turn SP605 power off while installing the FMC boards
Table of contents
Other Xilinx Computer Hardware manuals
Xilinx
Xilinx Spartan-3A DSP FPGA Series Quick start guide
Xilinx
Xilinx ML628 User manual
Xilinx
Xilinx Virtex-II Pro User manual
Xilinx
Xilinx Alveo X3522 User manual
Xilinx
Xilinx Alveo U50 User manual
Xilinx
Xilinx AC701 Si570 Owner's manual
Xilinx
Xilinx VC709 User manual
Xilinx
Xilinx Virtex-4 LX Prototype Platform User manual
Xilinx
Xilinx Kintex-7 FPGA KC705 User manual
Xilinx
Xilinx Alveo U50 User manual
Xilinx
Xilinx ML52 Series User manual
Xilinx
Xilinx CAST CZ80CPU User manual
Xilinx
Xilinx Virtex-4 QV FPGA User manual
Xilinx
Xilinx LogiCORE IP MAC v8.5 User manual
Xilinx
Xilinx ML628 User manual
Xilinx
Xilinx VC709 User manual
Xilinx
Xilinx ZCU102 User manual
Xilinx
Xilinx ML52 Series User manual
Xilinx
Xilinx Alveo U200 User manual
Xilinx
Xilinx ALINX AC6150 User manual
