Xilinx VC709 User manual
April 2015
VC709 Built-In Self Test
Flash Application
XTP232
© Copyright 2015 Xilinx, Inc. All Rights Reserved.
XILINX, the Xilinx logo, the Brand Window and other designated brands included herein are trademarks of Xilinx, Inc. All other trademarks are the property of
their respective owners.
NOTICE OF DISCLAIMER: The information disclosed to you hereunder (the “Information”) is provided “AS-IS” with no warranty of any kind, express or implied.
Xilinx does not assume any liability arising from your use of the Information. You are responsible for obtaining any rights you may require for your use of this
Information. Xilinx reserves the right to make changes, at any time, to the Information without notice and at its sole discretion. Xilinx assumes no obligation to
correct any errors contained in the Information or to advise you of any corrections or updates. Xilinx expressly disclaims any liability in connection with technical
support or assistance that may be provided to you in connection with the Information. XILINX MAKES NO OTHER WARRANTIES, WHETHER EXPRESS,
IMPLIED, OR STATUTORY, REGARDING THE INFORMATION, INCLUDING ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, OR NONINFRINGEMENT OF THIRD-PARTY RIGHTS.
Revision History
Date Version Description
04/30/14 12.0 Recompiled for 2015.1.
11/24/14 11.0 Recompiled for 2014.4.
10/08/14 10.0 Recompiled for 2014.3. Added AR59167.
06/09/14 9.0 Recompiled for 2014.2.
04/16/14 8.0 Recompiled for 2014.1.
12/18/13 7.0 Recompiled for 2013.4.
10/23/13 6.0 Recompiled for 2013.3. Converted to IPI, added dual MIG controller.
06/19/13 5.0 Recompiled for 2013.2. AR55431, AR55531, and AR55738 fixed.
04/30/13 4.1 Added AR55431, AR55531, and AR55738.
04/03/13 4.0 Recompiled for 2013.1.
01/18/13 3.0 Recompiled for 2012.4.
10/23/12 2.0 Recompiled for 2012.3.
09/20/12 1.0 Initial version.
Overview
Xilinx VC709 Board
Software Requirements
VC709 Setup
VC709 BIST (Built-In Self Test)
Compile VC709 BIST Design
Program VC709 with BIST Design
References
Note: This presentation applies to the VC709
VC709 BIST Design Description
Description
–The Built-In System Test (BIST) application uses an IPI MicroBlaze system to
verify board functionality. A UART based terminal program interface offers
users a menu of tests to run.
Block Design Source
–VC709 BIST Design Files (2015.1 C) ZIP file
–Available through http://www.xilinx.com/vc709
Note: Presentation applies to the VC709
VC709 BIST Design Description
Block Design IP
–Processor and Subsystems: MicroBlaze, MicroBlaze Debug Module (MDM),
Local Memory Bus, LMB BRAM Controller, Block Memory Generator, Proc Sys
Reset, AXI Interrupt Controller
–AXI Bus: AXI Interconnect, AXI Timer
–Memory: AXI BRAM Controller, MIG 7 Series
–Peripherals: AXI EMC, AXI IIC, AXI GPIO, AXI UART 16550, XADC Wizard
–Other IP: Constant, Concat, gte2_top
•Vivado Design Suite Tcl Command Reference Guide (UG835)
•Designing IP Subsystems Using IP Integrator (UG994)
Note: Presentation applies to the VC709
Xilinx VC709 Board
Vivado Software Requirements
Xilinx Vivado Design Suite 2015.1, Design Edition + SDK
–Combined installer
Note: Presentation applies to the VC709
VC709 Setup
Connect a USB Type-
A to Mini-B cable to
the USB UART
connector on the
VC709 board
–Connect this cable to
your PC
VC709 Setup
Connect a USB Type-
A to Micro-B cable to
the USB JTAG
(Digilent) connector
on the VC709 board
–Connect this cable to
your PC
–Power on the VC709
board for UART Drivers
Installation
VC709 Setup
Reboot your PC if necessary
Right-click on My Computer
and select Properties
–Select the Hardware tab
–Click on Device Manager
Note: Presentation applies to the VC709
VC709 Setup
Expand the Ports
Hardware
–Right-click on Silicon Labs
CP210x USB to UART
Bridge and select Properties
Note: Presentation applies to the VC709
VC709 Setup
Under Port Settings tab
–Click Advanced
–Set the COM Port to an open Com Port
setting from COM1 to COM4
Note: Presentation applies to the VC709
VC709 BIST
Unzip the VC709 BIST Design Files (2015.1 C) ZIP file
–Available through http://www.xilinx.com/vc709
Note: Presentation applies to the VC709
VC709 BIST
Open a Vivado Tcl Shell:
Start →All Programs →Xilinx Design Tools →Vivado 2015.1 →
Vivado 2015.1 Tcl Shell
Note: Presentation applies to the VC709
VC709 BIST
Download the bitstream with Vivado
In the Vivado Tcl Shell, type:
cd C:/vc709_bist/ready_for_download
source bist_download.tcl
Note: Presentation applies to the VC709
VC709 BIST
View initial BIST screen
Note: Presentation applies to the VC709
VC709 BIST
UART Test
–Type “1” to start the UART Test
–After each test, press any key to return to the main menu
Note: Presentation applies to the VC709
VC709 BIST
LED Test
–Type 2to begin LED Test
View Walking 1’s pattern on GPIO LEDs
–Sequence repeats twice
Note: Presentation applies to the VC709
Other manuals for VC709
7
Table of contents
Other Xilinx Computer Hardware manuals
Xilinx
Xilinx Virtex-4 QV FPGA User manual
Xilinx
Xilinx SP701 User manual
Xilinx
Xilinx Virtex-4 FX FPGA User manual
Xilinx
Xilinx XAPP169 Installation and operating instructions
Xilinx
Xilinx SP605 FMC Si570 Owner's manual
Xilinx
Xilinx PCI32 User manual
Xilinx
Xilinx MicroBlaze User manual
Xilinx
Xilinx Spartan-3A DSP FPGA Series User manual
Xilinx
Xilinx LogiCORE IP MAC v8.5 User manual
Xilinx
Xilinx Spartan-3A DSP FPGA Series User manual
Xilinx
Xilinx ML52 Series User manual
Xilinx
Xilinx ML628 User manual
Xilinx
Xilinx 7 Series User manual
Xilinx
Xilinx Virtex-II Pro ML300 User manual
Xilinx
Xilinx AV6045 User manual
Xilinx
Xilinx ML403 Installation and operating instructions
Xilinx
Xilinx ChipScope Pro User manual
Xilinx
Xilinx LogiCore PLB PCI Full Bridge User manual
Xilinx
Xilinx DPU IP User manual
Xilinx
Xilinx ML52 Series User manual
