Yealink IP Phone User manual

___________________________________________________________________________________________________________
YEALINK IP PHONE INTEROPERABILITY CONFIGURATION GUIDE
COPYRIGHT © 2001-2009 YEALINK NETWORK TECHNOLOGY CO.,LTD PAGE1 OF10
Contents
1. Requirements and Preparation..........................................................................................................2
2. Configure Yealink IP Phone...............................................................................................................2
2.1 Login to WEB management..........................................................................................................2
2.2 Configure the Account Settings....................................................................................................3
2.3 Configure the DSS Key as BLF....................................................................................................4
2.4 Configure the DSS Key as Call Park ............................................................................................5
3. Auto-configure Yealink Phone............................................................................................................6
4. Configure Datus...................................................................................................................................6
4.1 Login to Datus...............................................................................................................................6
4.2 Add a Subscriber...........................................................................................................................7
4.3 Active VoiceMail.........................................................................................................................8
Appendix...................................................................................................................................................9
Reference..................................................................................................................................................9

___________________________________________________________________________________________________________
YEALINK IP PHONE INTEROPERABILITY CONFIGURATION GUIDE
COPYRIGHT © 2001-2009 YEALINK NETWORK TECHNOLOGY CO.,LTD PAGE2 OF10
1. Requirements and Preparation
Software image v15-10-01-B07 or higher running on indali.
Software image x.42.x.x or higher running on the Yealink IP Phone.
2. Configure Yealink IP Phone
2.1 Login to WEB management
Press the OK button
IP address
Login using Default
User name/Password:
admin / admin

___________________________________________________________________________________________________________
YEALINK IP PHONE INTEROPERABILITY CONFIGURATION GUIDE
COPYRIGHT © 2001-2009 YEALINK NETWORK TECHNOLOGY CO.,LTD PAGE3 OF10
2.2 Configure the Account Settings
After entering the above settings, Account1will be available to make calls.
Note : If the SIP server is behind a NAT, you should enable “NAT Traversal” as “STUN” and
then specify a STUN Server. For more details about STUN, please refer to
http://www.voip-info.org/wiki/view/STUN. To learn about NAT, you should refer to
http://www.voip-info.org/wiki/view/NAT+and+VOIP
①Select “Account”
② Select one Account
③Active Account
④Fill in these fields
⑤Voicemail code
check Note

___________________________________________________________________________________________________________
YEALINK IP PHONE INTEROPERABILITY CONFIGURATION GUIDE
COPYRIGHT © 2001-2009 YEALINK NETWORK TECHNOLOGY CO.,LTD PAGE4 OF10
2.3 Configure the DSS Key as BLF
After entering the above settings, DSS Key1 is ready as BLF for Line 1, monitoring Extension
101. When there’s an incoming call on 101, DSS Key1 will flash red and you can directly
press it to pick up the call.
①Select “Phone”
②Select “DSS Key”
③Select “BLF”
④Select the
right line
⑤Extension
number
⑥Pickup code

___________________________________________________________________________________________________________
YEALINK IP PHONE INTEROPERABILITY CONFIGURATION GUIDE
COPYRIGHT © 2001-2009 YEALINK NETWORK TECHNOLOGY CO.,LTD PAGE5 OF10
2.4 Configure the DSS Key as Call Park
After entering the above settings, DSS Key2 is ready as Call Park for Line1.
An active call can be parked by pressing DSS Key2 during your conversation.
①Select “Phone”
②Select “DSS Key”
③Select “KeyEvent”
④Select
“Call Park”
⑤Select the
right line
⑥Park code +
parking orbit

___________________________________________________________________________________________________________
YEALINK IP PHONE INTEROPERABILITY CONFIGURATION GUIDE
COPYRIGHT © 2001-2009 YEALINK NETWORK TECHNOLOGY CO.,LTD PAGE6 OF10
3. Auto-configure Yealink Phone
Please refer to Yealink Document Auto Provision Manual:
http://www.yealink.com/fae/Auto Provision Manual.rar
4. Configure Datus
4.1 Login to Datus
Default Extension number(admin)
Default password(pbx)

___________________________________________________________________________________________________________
YEALINK IP PHONE INTEROPERABILITY CONFIGURATION GUIDE
COPYRIGHT © 2001-2009 YEALINK NETWORK TECHNOLOGY CO.,LTD PAGE7 OF10
4.2 Add a Subscriber
Select
Subscriber
Click
Insert
Enter Number
Display Name
④Enter
SIP-Password
⑤Select a
Pickupgroup
⑥Click Submit

___________________________________________________________________________________________________________
YEALINK IP PHONE INTEROPERABILITY CONFIGURATION GUIDE
COPYRIGHT © 2001-2009 YEALINK NETWORK TECHNOLOGY CO.,LTD PAGE8 OF10
4.3 Active VoiceMail
Select a
Subscriber
Click to Edit
Select Destination Type
as Voicemailbox
④Tick Active
⑤Click Submit

___________________________________________________________________________________________________________
YEALINK IP PHONE INTEROPERABILITY CONFIGURATION GUIDE
COPYRIGHT © 2001-2009 YEALINK NETWORK TECHNOLOGY CO.,LTD PAGE9 OF10
Appendix
1. Default Basic Dial Code on Datus System
Voice Mail（VMail）
*97
Call Park
8300
Callpark Retrieve
8301
Reference
www.Datus.com
www.yealink.com