Yealink SIP-T40P User manual

Wall Mount Quick Installation Guide
for SIP-T40/T41/T42 IP Phones
(V1.2)
This quick installation guide provides step-by-step
instructions for mounting your IP phone to a wall.
www.yealink.com
The wall mount bracket is required for wall mount
installation, which is not included with your IP phone,
contact your reseller to purchase it separately.
Wall mount is avaliable for the following IP phones:
Packaging Contents
The following items are included in your package. If
you find anything missing, contact your system
administrator.
SIP-T41S/T41P IP Phone
SIP-T42S/T42G IP Phone
Wall Mount Quick Installation Guide
100mm 2
83mm 2
Following the drilling template above, you can mount
the IP phone to the wall, as shown below:
You can also download the wall mount drilling
template online:
http://www.yealink.com/Support.aspx.
SIP-T40P IP Phone

1. Pull the hookswitch tab in the handset cradle.
2. Rotate the hookswitch tab 180 degrees.
3. Reinsert the hookswitch tab.
To adjust the hookswitch tab:
Quick Installation Guide
Wall anchors and appliable tools not included in your
package are also required for wall mount installation.
Wall Mount Bracket
Adjusting the Hookswitch Tab
The IP phone is packaged with the hookswitch tab in
desk mount position. Before mounting the IP phone
to a wall, you must set the hookswitch tab to wall
mount position.
Adjust the hookswitch tab as shown below:
T41P
Insert the tabs on the wall mount bracket into the slots
on the back of IP phone. And then slide the wall mount
bracket to right.
The hookswitch tab has a lip which allows the handset
to stay on-hook when the IP phone is mounted vertically.
Attaching the Wall Mount Bracket
To attach the wall mount bracket:
www.yealink.com
Mounting the Wall Mount Bracket
Yealink provides two kinds of the wall mount drilling
templates, which locate and mark the position for
mounting the screws (not provided) on the wall, as
shown below:
Wall Mount Quick Installation Guide