Yealink T22P User manual

Barracuda Phone System
Yealink T22P/T26P/T28P IP Telephone Quick Reference Guide 1 / 4
Yealink T22P/T26P/T28P IP Telephone Quick Reference Guide
https://campus.barracuda.com/doc/45712814/
This article explains the basic operation of the Yealink T22P, T26P, and T28P IP telephones.
Yealink Model T28P
Soft Keys
The four buttons immediately below the LCD display are soft keys.
Each soft key performs the action displayed immediately above it.
Soft key behavior is context sensitive – the associated soft key action changes according to the
current phone state.
Place a Call
Lift the handset, press the speakerphone button or headset button.
Dial the number, then press the Send soft key.
Redial
To redial the last number, press the RD button twice.
To view previously dialed numbers, press the RD button once and then use the up and down
arrow keys to scroll through the list. Press the Send soft key to dial the highlighted phone
number.
Voicemail Access

Barracuda Phone System
Yealink T22P/T26P/T28P IP Telephone Quick Reference Guide 2 / 4
To access voicemail messages, press the Message button.
Depending on your system configuration, you may be prompted for a voicemail PIN number.
Call Hold
To place an existing call on hold, press the Hold button or the Hold soft key.
To retrieve a call on hold, press the Resume soft key.
If multiple calls are on hold, press the appropriate line key before pressing Resume.
Call Transfer
To transfer a call in progress, press the Tran or Transfer soft key.
Dial the destination number, then press the Send soft key.
When the destination party answers, announce the caller, and press Trans or Transfer again
to complete the transfer.
If there is no answer, press the Cancel soft key and then the Resume soft key to return to the
original caller.
3-Way Calling
Place (or receive) a call.
To add another party to the call, press the Conf soft key, dial the destination number, then
press the Send soft key.
When the party answers, press the Conf soft key again.
If there is no answer, press the Cancel soft key and then the Resume soft key to resume the
call.
Call Forwarding
When your phone is idle, press the Menu soft key, then select Features > Call Forward.
Select Always Forward, enter the destination, then press the Save soft key.
To cancel call forwarding, select Always Forward and the Switch soft key.
Volume Control

Barracuda Phone System
Yealink T22P/T26P/T28P IP Telephone Quick Reference Guide 3 / 4
Press the Menu soft key and select Settings > Basic > Phone Volume.
Select Handset, Speaker, Headset, or Ringer, then press the Enter soft key.
Use the volume control button to adjust volume, then press OK.
During an active call, the volume control button changes the volume of the handset,
speakerphone or headset, whichever is active.
Call History
To view missed, received, or placed calls, press the History soft key.
Use the left and right arrow keys to choose between All Calls, Dialed Calls, Received
Calls, Missed Calls, and Forwarded Calls.
Use the up and down arrow keys to scroll through the list.
To dial a number, highlight it and then press the Send soft key.
To delete a number, highlight it and press the Delete soft key.

Barracuda Phone System
Yealink T22P/T26P/T28P IP Telephone Quick Reference Guide 4 / 4
Figures
worddav00508de1b2dbc3ab348eb0a92a77133d.png1.
© Barracuda Networks Inc., 2019 The information contained within this document is confidential and proprietary to Barracuda Networks Inc. No
portion of this document may be copied, distributed, publicized or used for other than internal documentary purposes without the written consent of
an official representative of Barracuda Networks Inc. All specifications are subject to change without notice. Barracuda Networks Inc. assumes no
responsibility for any inaccuracies in this document. Barracuda Networks Inc. reserves the right to change, modify, transfer, or otherwise revise this
publication without notice.