Yealink T46G Skype For Business Edition Manual

Yealink T46G
Admin Guide
Schmooze Com Inc.
OK
X
T46G
1 2 ABC 3 DEF
4 GHI 5 JKL 6 MNO
7PQRS 8 TUV 9 WXYZ
*.0 #
SEND
_+
Back Update Search Enter
1. Sales
Remote DIR

Chapters
How to Find the IP Address
How to Find the MAC Address
How to Set the Configuration Server
How to Restore Factory Default
© Copyright Schmooze Com, 2013
How to Find the IP Address
Quick Steps
1. Press the “Menu” button to enter the main menu.
2. Option 1 is “Status” and should already be highlighted. Then press “Enter.”
3. The IP Address will display here.
How to Find the MAC Address
Quick Steps
1. Press the “Menu” button to enter the main menu.
2. Option 1 is “Status” and should already be highlighted. Then press “Enter.”
3. The MAC Address will display here.
How to Set the Configuration Server
Quick Steps
1. Enter the IP Address into a local web browser address field.
2. When prompted, enter “admin” as the user name and “admin” as the password.
3. From the home page of the GUI, click on the “Settings” tab at the top.
4. Then click on “Auto Provision” from the options on the left.
5. Lastly, populate the “Server URL” field to your PBX. Generally this would
be an IP Address, such as 10.10.0.1 in our example. Then press the “Confirm” button at the
bottom when you are finished.
How to Restore Factory Default
Quick Steps
1. Press the “Menu” button to enter the main menu.
2. Highlight the last option, “Advanced,” and press “Enter.”
3. Then enter your password. By default this is “admin.”
4. Next scroll to option 8, “Reset&Reboot.”
5. Option 1 is “Reset to Factory” and should already be highlighted. Then press “Enter.”
6. Use the “Switch” button to set the Reset Option to “Full Reset.” Then press the “Save” button.
A warning will then show on the screen asking you to “Reset to Factory?” To proceed with this
process, press “OK.”

Chapters
How to Find the IP Address
How to Find the MAC Address
How to Set the Configuration Server
How to Restore Factory Default
How to Find the IP Address
Quick Steps
1. Press the “Menu” button to enter the main menu.
2. Option 1 is “Status” and should already be highlighted. Then press “Enter.”
3. The IP Address will display here.
© Copyright Schmooze Com, 2013
How to Find the MAC Address
Quick Steps
1. Press the “Menu” button to enter the main menu.
2. Option 1 is “Status” and should already be highlighted. Then press “Enter.”
3. The MAC Address will display here.
How to Set the Configuration Server
Quick Steps
1. Enter the IP Address into a local web browser address field.
2. When prompted, enter “admin” as the user name and “admin” as the password.
3. From the home page of the GUI, click on the “Settings” tab at the top.
4. Then click on “Auto Provision” from the options on the left.
5. Lastly, populate the “Server URL” field to your PBX. Generally this would
be an IP Address, such as 10.10.0.1 in our example. Then press the “Confirm” button at the
bottom when you are finished.
How to Restore Factory Default
Quick Steps
1. Press the “Menu” button to enter the main menu.
2. Highlight the last option, “Advanced,” and press “Enter.”
3. Then enter your password. By default this is “admin.”
4. Next scroll to option 8, “Reset&Reboot.”
5. Option 1 is “Reset to Factory” and should already be highlighted. Then press “Enter.”
6. Use the “Switch” button to set the Reset Option to “Full Reset.” Then press the “Save” button.
A warning will then show on the screen asking you to “Reset to Factory?” To proceed with this
process, press “OK.”
Back
1. IPv4:
2. MAC:
3. Firmware:
4. More...
Status
10.10.0.1
00-15-65-4a-a8-2f
28.71.0.86
History DND Menu
12 05 PM Thu Dec 05
Directory
SIP-T46G
Aastra
SIP-T46G
cell
DND
Follow Me
VMail
Luke
4102
4103
x
x
x
x
Exit Enter
Main Menu
Status Call Feature Directory History
Message Basic Advanced

Chapters
How to Find the IP Address
How to Find the MAC Address
How to Set the Configuration Server
How to Restore Factory Default
How to Find the IP Address
Quick Steps
1. Press the “Menu” button to enter the main menu.
2. Option 1 is “Status” and should already be highlighted. Then press “Enter.”
3. The IP Address will display here.
How to Find the MAC Address
Quick Steps
1. Press the “Menu” button to enter the main menu.
2. Option 1 is “Status” and should already be highlighted. Then press “Enter.”
3. The MAC Address will display here.
© Copyright Schmooze Com, 2013
How to Set the Configuration Server
Quick Steps
1. Enter the IP Address into a local web browser address field.
2. When prompted, enter “admin” as the user name and “admin” as the password.
3. From the home page of the GUI, click on the “Settings” tab at the top.
4. Then click on “Auto Provision” from the options on the left.
5. Lastly, populate the “Server URL” field to your PBX. Generally this would
be an IP Address, such as 10.10.0.1 in our example. Then press the “Confirm” button at the
bottom when you are finished.
How to Restore Factory Default
Quick Steps
1. Press the “Menu” button to enter the main menu.
2. Highlight the last option, “Advanced,” and press “Enter.”
3. Then enter your password. By default this is “admin.”
4. Next scroll to option 8, “Reset&Reboot.”
5. Option 1 is “Reset to Factory” and should already be highlighted. Then press “Enter.”
6. Use the “Switch” button to set the Reset Option to “Full Reset.” Then press the “Save” button.
A warning will then show on the screen asking you to “Reset to Factory?” To proceed with this
process, press “OK.”
Back
1. IPv4:
2. MAC:
3. Firmware:
4. More...
Status
10.10.0.1
00-15-65-4a-a8-2f
28.71.0.86
History DND Menu
12 05 PM Thu Dec 05
Directory
SIP-T46G
Aastra
SIP-T46G
cell
DND
Follow Me
VMail
Luke
4102
4103
x
x
x
x
Exit Enter
Main Menu
Status Call Feature Directory History
Message Basic Advanced

Chapters
How to Find the IP Address
How to Find the MAC Address
How to Set the Configuration Server
How to Restore Factory Default
How to Find the IP Address
Quick Steps
1. Press the “Menu” button to enter the main menu.
2. Option 1 is “Status” and should already be highlighted. Then press “Enter.”
3. The IP Address will display here.
How to Find the MAC Address
Quick Steps
1. Press the “Menu” button to enter the main menu.
2. Option 1 is “Status” and should already be highlighted. Then press “Enter.”
3. The MAC Address will display here.
How to Set the Configuration Server
Quick Steps
1. Enter the IP Address into a local web browser address field.
2. When prompted, enter “admin” as the user name and “admin” as the password.
3. From the home page of the GUI, click on the “Settings” tab at the top.
© Copyright Schmooze Com, 2013
4. Then click on “Auto Provision” from the options on the left.
5. Lastly, populate the “Server URL” field to your PBX. Generally this would
be an IP Address, such as 10.10.0.1 in our example. Then press the “Confirm” button at the
bottom when you are finished.
How to Restore Factory Default
Quick Steps
1. Press the “Menu” button to enter the main menu.
2. Highlight the last option, “Advanced,” and press “Enter.”
3. Then enter your password. By default this is “admin.”
4. Next scroll to option 8, “Reset&Reboot.”
5. Option 1 is “Reset to Factory” and should already be highlighted. Then press “Enter.”
6. Use the “Switch” button to set the Reset Option to “Full Reset.” Then press the “Save” button.
A warning will then show on the screen asking you to “Reset to Factory?” To proceed with this
process, press “OK.”
Account NetworkStatus
Features
Preference
Line1
Web Language
Time Synchronization
Time Server
Synchronization Period
English
cn.pool.ntp.org
86400
Enabled
Username
Login
Password
Cancel Confirm
admin
Enterprise IP phone SIP-T46G
Status Account Network DSSKey Features Settings
Status NOTE
Version:
It shows the version
Network:
It shows the information
port.
Directory
Version
Firmware Version
Hardware Version
28.71.0.86
29.0.0.0.0.0.0
?
?
?
?
Internet Port
WAN Port Type
Network
IPv4
WAN IP Address
Subnet Mask
Gateway
Primary DNS
Secondary DNS
Network Common
MAC Address
IPv4
DHCP
10.10.0.1
255.255.255.0
10.4.0.254
199.103.245.4
8.8.8.8
0015654aa82f

Chapters
How to Find the IP Address
How to Find the MAC Address
How to Set the Configuration Server
How to Restore Factory Default
How to Find the IP Address
Quick Steps
1. Press the “Menu” button to enter the main menu.
2. Option 1 is “Status” and should already be highlighted. Then press “Enter.”
3. The IP Address will display here.
How to Find the MAC Address
Quick Steps
1. Press the “Menu” button to enter the main menu.
2. Option 1 is “Status” and should already be highlighted. Then press “Enter.”
3. The MAC Address will display here.
How to Set the Configuration Server
Quick Steps
1. Enter the IP Address into a local web browser address field.
2. When prompted, enter “admin” as the user name and “admin” as the password.
3. From the home page of the GUI, click on the “Settings” tab at the top.
4. Then click on “Auto Provision” from the options on the left.
5. Lastly, populate the “Server URL” field to your PBX. Generally this would
be an IP Address, such as 10.10.0.1 in our example. Then press the “Confirm” button at the
bottom when you are finished.
© Copyright Schmooze Com, 2013
How to Restore Factory Default
Quick Steps
1. Press the “Menu” button to enter the main menu.
2. Highlight the last option, “Advanced,” and press “Enter.”
3. Then enter your password. By default this is “admin.”
4. Next scroll to option 8, “Reset&Reboot.”
5. Option 1 is “Reset to Factory” and should already be highlighted. Then press “Enter.”
6. Use the “Switch” button to set the Reset Option to “Full Reset.” Then press the “Save” button.
A warning will then show on the screen asking you to “Reset to Factory?” To proceed with this
process, press “OK.”
Line3
Line4
Line5
Upgrade
Auto Provision
Configuration
Dial Plan
Voice
Tones
Time Zone
Daylight Saving Time
Watch Dog
+8 China(Beijing)
Disabled
Disabled
Confirm
NOTE
Phone AutoProvision
?
?
?
?
?
?
?
?
?
?
?
Auto Provision
PNP Active
DHCP Active
Custom Option(128~254)
DHCP Option Value
Server URL
User Name
Password
Common AES Key
MAC-Oriented AES Key
Power On
Repeatedly
Interval (Minutes)
Weekly
Time
Day of Week
On Off
On Off
On Off
On Off
On Off
1440
Sunday
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
yealink
10.10.0.1
00 : :00 00 00
Autoprovision Now
CancelConfirm
Time & Date
Preference
Upgrade
Auto Provision
Configuration
Dial Plan
Voice
Ring
Tones
Softkey Layout
--
Zero Active
Wait Time (0~100s)
?
Disabled
5
?
Account Network DSSKey Features
Directory
Settings
Status

Chapters
How to Find the IP Address
How to Find the MAC Address
How to Set the Configuration Server
How to Restore Factory Default
How to Find the IP Address
Quick Steps
1. Press the “Menu” button to enter the main menu.
2. Option 1 is “Status” and should already be highlighted. Then press “Enter.”
3. The IP Address will display here.
How to Find the MAC Address
Quick Steps
1. Press the “Menu” button to enter the main menu.
2. Option 1 is “Status” and should already be highlighted. Then press “Enter.”
3. The MAC Address will display here.
How to Set the Configuration Server
Quick Steps
1. Enter the IP Address into a local web browser address field.
2. When prompted, enter “admin” as the user name and “admin” as the password.
3. From the home page of the GUI, click on the “Settings” tab at the top.
4. Then click on “Auto Provision” from the options on the left.
5. Lastly, populate the “Server URL” field to your PBX. Generally this would
be an IP Address, such as 10.10.0.1 in our example. Then press the “Confirm” button at the
bottom when you are finished.
How to Restore Factory Default
Quick Steps
1. Press the “Menu” button to enter the main menu.
2. Highlight the last option, “Advanced,” and press “Enter.”
3. Then enter your password. By default this is “admin.”
© Copyright Schmooze Com, 2013
4. Next scroll to option 8, “Reset&Reboot.”
5. Option 1 is “Reset to Factory” and should already be highlighted. Then press “Enter.”
6. Use the “Switch” button to set the Reset Option to “Full Reset.” Then press the “Save” button.
A warning will then show on the screen asking you to “Reset to Factory?” To proceed with this
process, press “OK.”
Exit Enter
Main Menu
Status Call Feature Directory History
Message Basic Advanced
Main Menu
Status Call Feature Directory History
Message Basic Advanced
i
admin
Password
Cancel OK123 Delete
History DND Menu
12 05 PM Thu Dec 05
Directory
SIP-T46G
Aastra
SIP-T46G
cell
DND
Follow Me
VMail
Luke
4102
4103
x
x
x
x

Chapters
How to Find the IP Address
How to Find the MAC Address
How to Set the Configuration Server
How to Restore Factory Default
How to Find the IP Address
Quick Steps
1. Press the “Menu” button to enter the main menu.
2. Option 1 is “Status” and should already be highlighted. Then press “Enter.”
3. The IP Address will display here.
How to Find the MAC Address
Quick Steps
1. Press the “Menu” button to enter the main menu.
2. Option 1 is “Status” and should already be highlighted. Then press “Enter.”
3. The MAC Address will display here.
How to Set the Configuration Server
Quick Steps
1. Enter the IP Address into a local web browser address field.
2. When prompted, enter “admin” as the user name and “admin” as the password.
3. From the home page of the GUI, click on the “Settings” tab at the top.
4. Then click on “Auto Provision” from the options on the left.
5. Lastly, populate the “Server URL” field to your PBX. Generally this would
be an IP Address, such as 10.10.0.1 in our example. Then press the “Confirm” button at the
bottom when you are finished.
How to Restore Factory Default
Quick Steps
1. Press the “Menu” button to enter the main menu.
2. Highlight the last option, “Advanced,” and press “Enter.”
3. Then enter your password. By default this is “admin.”
4. Next scroll to option 8, “Reset&Reboot.”
5. Option 1 is “Reset to Factory” and should already be highlighted. Then press “Enter.”
6. Use the “Switch” button to set the Reset Option to “Full Reset.” Then press the “Save” button.
A warning will then show on the screen asking you to “Reset to Factory?” To proceed with this
process, press “OK.”
© Copyright Schmooze Com, 2013
Back Enter
1. Reset to Factory
Reset&Reboot
2. Reboot
Back Enter
6. Auto Provision
7. FWD International
8. Reset&Reboot
Advanced
Back Switch Enter
1. Reset Option:
Reset&Reboot
Full Reset 1. Reset Option:
Reset&Reboot
Full Reset
Cancel OK
i
Warning
Reset to factory?

Schmooze Com Inc.
http://schmoozecom.com
[phone]