Yealink Verizon One Talk W60B User manual

Quick Start Guide(V81.30)
DECT IP Phone
For W60B firmware 77.81.0.30 or later
For W56H firmware 61.81.0.30 or later
W60B & W56H
www.firstcomm.com

Packaging Contents
W56H Handset
USB Charger Cradle
Power Adapter
Belt Clip
1
Note: We recommend that you use the accessories provided or approved by Yealink. The use
of unapproved third-party accessories may result in reduced performance.
Note: Yealink W60P DECT IP phone consists of one W60B base station and one W56H handset.
W56H Package Contents
W56H Handset W60B Base Station Base Stand USB Charger Cradle
Belt Clip
2 Power Adapters
Ethernet Cable Rechargeable Battery Quick Start Guide Handset Protective Case
(Optional)
Rechargeable Battery Handset Protective Case (Optional)
W60P Package Contents

1. Connect the base station power and the network using Method a or
Method b.
a. AC Power Option b. PoE (Power over Ethernet) Option
2
Note: If you choose Method a, use Yealink supplied power adapter (5V/600mA).
A third-party power adapter may damage the base station.
If you choose Method b, you do not need to connect the power adapter.
Make sure the hub/switch is PoE-compliant.
Packaging Contents
IEEE 802.3af compliant
PoE Hub/Switch
MAC
SN
2a. (Desktop Installation) Attach and remove the base stand.
W60B Base Station Base Stand Power Adapter Ethernet Cable Quick Start Guide
W60B Package Contents
Assembling the DECT Phone
MAC
SN
MAC
SN
Attach the Base Stand Remove the Base Stand
Align the snap-fits with the corresponding holes
and push forward, snapping them into the holes.
Remove the snap-fits from the
holes horizontally.

3. Insert the battery into the handset.
4. Attach the Belt Clip.
3
5. (Optional) Mount the charger cradle to the wall.
36mm
36mm
battery
2b. (Wall-Mount Installation) Attach the base station.
MAC
SN
59mm
59mm
MAC
SN

6. Connect the charger cradle and charge the handset.
4
Shortcuts
Shortcut keys help you quickly access to frequently used phone features. Check the
default shortcut keys below:
Press the left soft key to access the call history.
Press the right soft key to check the line status.
Press to place an internal call.
Press to increase the ringer volume.
Press to access the directory.
Press to decrease the ringer volume.
Note: Use Yealink s upplied power adapter (5V/600mA). A third-party power adapter may
damage the handset.
Check the charging status on the top right corner of the LCD screen.
22
54
5
3
1
6
6
1
3
4
Getting Started
Note: The W60B must work with the W56H handset running the firmware version
61.81.0.30 or later. We recommend you first upgrade the older handset before using
on the W60B. When you upgrade the older handset via W60B, the number of the
handsets registered on the W60B should be no more than 5. If it is more than 5,
deregister the newer handset first and then upgrade the remaining handsets. Repeat
the step to upgrade all the older handsets. Once all handsets are on the right version,
you can register up to 8 handsets on the W60B.

5
Easy Registration:
Normal Registration:
Handset Registration
You can register up to 8 handsets to one W60B base station. Each handset can be
registered to 4 different base stations.
1.Press the OK soft key on the handset, and then select Register Handset.
2.Select the desired base station and then press the OK soft key. The handset begins
searching the base station.
3.Press the OK soft key after searching a base station successfully.
4.Enter the base station PIN (default: 0000), and then press the Done soft key to
complete registration.
1.Press the Reg soft key on the handset to register quickly.
To register to multiple base stations, press the OK to enter the main menu, and select
Settings->Registration->Register Handset, then repeat steps 2-4.
Note: If the handset is registered to the base station successfully, the handset LCD
screen prompts “Handset Subscribed” and “Base NO.”( last 4 characters indicate
the base station’s MAC address).
If the handset LCD screen prompts “Searching for Base”, check if your base
station is powered on or not.
When the handset LCD screen prompts “Unregistered!”, long press on the base
station till the registration LED flashes. There are two methods to register a new
handset:

6
Turning Handset On/Off
To turn the handset on, do one of the following:
Place the handset in the charger cradle. The handset will be turned on automatically.
To turn the handset off:
Locking/Unlocking Keypad
Silent Mode
Press , then the LCD screen lights up.
Long press to turn the handset off.
Long press when the handset is idle to switch the silent mode to On.
Long press when the handset is idle to lock the keypad.
Long press again to switch the silent mode to Off.
Long press again to unlock the keypad.
Basic Operations

Handset Name
1.Press the OK key to enter the main menu, and then select Settings->Handset Name .
3.Press the Save soft key to accept the change.
Ring Tones
4.Press the Save soft key to accept the change.
Local Directory
To add a contact:
1.Press the OK key to enter the main menu, and then select Directory.
3.Enter the desired value in the Name, Office, Mobile and Other field respectively.
2.Press the Options soft key, and then select New Contact.
4.Press the Save soft key to accept the change.
To edit a contact:
1.Press the OK key to enter the main menu, and then select Directory.
Press or when the handset is idle or ringing to adjust the ringer volume.
Volume Adjustment
Press or during a call to adjust the receiver volume of speakerphone/earpiece
/earphone.
3.Press or to select the desired ring tone.
2.Press or to highlight the desired entry.
To rename the handset:
3.Press the Options soft key, and then select Edit.
4.Edit the desired value in the Name, Office, Mobile and Other field respectively.
5.Press the Save soft key to accept the change.
To delete a contact:
1.Press the OK key to enter the main menu, and then select Directory.
3.Press the Options soft key, and then select Delete to delete the selected entry.
2.Press or to highlight the desired entry.
7
2.Press or to highlight the Intercom Call option or the desired line.
2.Edit the value in the Rename field.
1.Press the OK key to enter the main menu, and then select Settings->Audio->Ring
Tones->Melodies.
Handset Settings

Placing Calls
To place a call from the local directory:
To place a call from the call history:
1.Press the History soft key when the handset is idle, and then select the desired call
history list.
To place a call directly:
1.Press when the handset is idle.
Enter the desired number when the handset is idle.
2.Press or to highlight the desired entry, and then press or to dial out
using the default line.
To place a call from the redial list:
1.Press when the handset is idle.
2.Press or to highlight the desired entry, and then press or .
If multiple numbers for the contact are stored, press or to highlight the desired
number, and then press or again to dial out using the default line.
8
2.Press or to highlight the desired entry, and then press or to dial out
using the default line.
Press to enter the pre-dialing screen.
Enter the desired number using the keypad.
If there are multiple lines assigned to your handset as outgoing lines, press the Line
soft key to select the desired line. If you do not select a line, the handset uses the
default outgoing line to dial out.
2.Press , or to dial out.
1.Do one of the following:
Basic Call Features
Answering Calls
To answer a call, do one of the following:
Press the Accept soft key.
.
Press .
Press
Press .

Ending Calls
Press .
If there is only a call on hold, press the Resume soft key.
Call Hold and Resume
To place a call on hold:
Press the Options soft key during a call, and then select Hold.
To resume a call, do one of the following:
If there are two calls on hold, press the Resume soft key to resume the current call.
Press the Swap soft key to swap between calls.
Call Transfer
You can transfer a call in the following ways:
Blind Transfer
1.Press the Options soft key during a call, and then select Transfer.
Call Mute
Press again to un-mute the call.
Press during a call to mute the call.
9
Note: You can ignore an incoming call by pressing the Silence soft key or reject an incoming
call by pressing .
3.Press the Transfer soft key.
2.Enter the number you want to transfer the call to.
Attended Transfer
1.Press the Options soft key during a call, and then select Transfer.
2.Enter the number you want to transfer the call to.
4.Press the Transfer soft key after the call is answered.
Call Forward
To enable the call forward:
•Update Call-Froward- Dial *56
•Enable Call-Forward- Dial *72
•Disable Call-Forward- Dial *73
•Toggle Call-Forward- Dial *74
3.Press , or to dial out.