Zapi SMART CONSOLE User manual

ZAPI SMART CONSOLE
Introduction for WPT45

Location of Controller Socket

Traction VACC
Key on the truck, connect the flash
connecting line. The Display will show: Cons AFG ZP021*
The Display will show : Cons AFG ZP021*
RS232 CONSOLE
Press or button until RS232
CONSOLE shows on the display
Press OK to go into the
Traction Menu
The Display will show: ACOT2SE4 CI2.33
24V 150A 0H

Press OK to go into the
Main Menu
The Display will show: Main Menu
Press or button until
PROGRAM VACC shows on the display
The Display will show: MAIN MENU
PROGRAM VACC
Press OK to go into the PROGRAM
VACC function
The Display will show the minimum and
maximum throttle voltage values. Both
directions will be shown
VACC SETTING
CURRENT VALUE

Press OK to clear these values.
Display will show 0.0
The display will show: FORWARD x.xV x.xV
Slowly depress the accelerator forward to
its maximum value. The new minimum and
maximum voltages will be displayed on the
Console plus an arrow indicating the
direction.
Repeat step for reverse direction
BACKWARD x.xV x.xV
When finished , press ESC

The Display will ask : APPLY
CHANGES ? APPLY CHANGES?
YES= OK NO=ESC
Press OK for yes
When finished, the Console shows : Main Menu
Press and hold power button for 3s
to turn off the Console