Zapi SMART CONSOLE User manual

ZAPI SMART CONSOLE
Introduction for CB22

Traction VACC
Press OK to go into the
Traction controller
The Display will show: ADXT2S C22EP006
24V 150A 0H
Key on the truck, connect the flash
connecting line. The Display will show: Cons AFG ZP021*
Press or button until RS232
CONSOLE shows on the display
The Display will show : Cons AFG ZP021*
RS232 CONSOLE

Press OK to go into the
Main Menu
The Display will show: Main Menu
Press or button until
PROGRAM VACC shows on the display
The Display will show: MAIN MENU
PROGRAM VACC
Press OK to go into the PROGRAM
VACC function
The Display will show the minimum and
maximum values of throttle voltage. Both
directions are shown
VACC SETTING
CURRENT VALUE

Press OK to clear these values.
Display will show 0.0
Select Forward Direction FORWARD x.xV x.xV
Slowly depress the accelerator to its
maximum value. The new minimum
and maximum voltages will be displayed on
the Console plus an arrow indicating the
direction.
Select the Reverse Direction and
repeat the item above BACKWARD x.xV x.xV
When finished , press ESC

The Display will ask : APPLY
CHANGES ? APPLY CHANGES?
YES= OK NO=ESC
Press OK for yes
When finished, the Console shows : Main Menu
Press and hold power button 3s to
turn off the Console