Zest 4 Leisure Abbey User manual

Assembly Instructions
(W x D x H) 1.00m x 1.00m x 0.72m
Product Name: Abbey Round Table
Pressure Treated products should not be treated with any other products for the first month.
PLEASE KEEP THIS INSTRUCTION
Zest4Leisure
01352 752555 option 1 –[e-mail]
V1-11.14

Abbey Round Table Assembly Instructions
Requires 2 person assembly.All screw holes to be pre-drilled.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, 3mm Drill Bit,
Spanner.
Abbey Round Table Pack List
Item Description Quantity
ALeg 4
B Table Top 1
C Cross Bracing 2
D Horizontal Bracing 2
E Diagonal Bracing 4
Fixings
40mm Screw 13
60mm Screws 8
Bolts, washers & nuts 8
www.zest4leisure.co.uk

Please take a few moments to check all pack contents listed.
Please contact “Zest4Leisure” directly if any of the pack contents are damaged
or missing. Contact telephone: [phone] option 1 or email:
[email protected]
Assembly requires 2 persons. All screw holes to be pre-drilled.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, 3mm Drill Bit,
Spanner.
Abbey Round Table is now complete.
1. Position Leg A (Fig.1a) and attach to Table Top B using 2no Bolts, washers &
nuts (Fig.1b). Repeat procedure for the remaining Legs A.
2. Interlock Cross Bracings C (Fig.2a) and fix using 1no 40mm Screw (Fig.2b).
3. Attach Cross BracingAssembly to legs using 1no 60mm Screw per Leg A and
at a height of 350mm (nominal) (Fig.3).
4. Position Horizontal Bracing D between table top bearers and attach to Legs A
using 4no 40mm Screws –2no per leg (Fig.4). Repeat the procedure for the
remaining Horizontal Bracing D on the opposite side.
5. Attach Diagonal Bracing E to Leg A using 1no 60mm Screw (Fig.5a) and to
the table top bearer using 1no 40mm Screw (Fig5b). Repeat procedure for the
remaining 3 LegsA and Diagonal Bracings E

www.zest4leisure.co.uk
1b1a
2a 2b
3 4
5a 5b