Zest 4 Leisure 15218 User manual

www.zest4leisure.co.uk | 01352 752555 option 1 | [e-mail]
V1
Assembly Instructions
Poppy Round Picnic Table
Dimensions: 2.05m Diameter x 0.75m High
PLEASE KEEP THESE INSTRUCTIONS
Pressure Treated products should not be treated with any other
products for the first month
Code: 15218

www.zest4leisure.co.uk | 01352 752555 option 1 | [e-mail]
Poppy Round Picnic Table Assembly Instructions
Please take a few moments to check all pack contents listed
Requires 2 person assembly
Tools required: Hammer, corded / cordless drill, pozi–drive bit / screwdriver,
13mm spanner / adjustable spanner.
Fixings Quantity
80mm Screws 16
100mm Bolts 16
70mm Bolt, 30mm Washers, Spring Washer & Nuts 16
Poppy Round Picnic Table Pack List
Item Description Quantity
A1 & A2 Seat Bar 4
B Seat Assembly 4
CLeg 8
D Leg Brace 4
E Table Top Support 4
F Table Top 1

www.zest4leisure.co.uk | 01352 752555 option 1 | [e-mail]
Please take a few moments to check all pack contents listed
Requires 2 person assembly
Tools required: Hammer, corded / cordless drill, pozi–drive bit / screwdriver,
13mm spanner / adjustable spanner.
1. Position Seat bars (A1) onto 2no. Seat Assemblies (B) as shown in Fig 1a, (1no Seat Assembly (B) to ei-
ther end of Seat Bars (A1). Align bolt holes and insert 2no. 100mm bolts (1no. bolt per end), attach wash-
ers and nuts but do not fully tighten at this stage. Repeat process using Seat Bars (A2) and remaining
2no. Seat Assemblies (B).
2. Position Legs (C) as shown in Fig 2. Align bolt holes & insert 4no. 70mm bolts (2no. per Leg (C)). Attach
washers and nuts but do not fully tighten at this stage.
Repeat process for the remaining 6 Legs (C) (2no. Legs (C) per seat)
3. Position Leg Brace (D) on to Seat Bars and fix in position using 2no. 80mm screws (See Fig 3a). Attach
Legs to Leg Brace (D) with 2no 80mm screws. (1no. screw per leg). (See Fig 3b).
Repeat process for remaining 3no. Leg Braces (D) using 12no 80mm screws.
4. Ensuring correct orientation (See Fig 4a), interlock seat bars A1 and A2 as shown in Fig 4b.
5. Insert Table-Top support (E) between Seat Bars, align bolt holes and insert 2no. 100mm bolts (See Fig
5). Attach washers and nuts but do not fully tighten at this stage.
Repeat process for remaining 3no. Table-Top supports (E).
6. Locate Table-Top (F) on to Table-Top Supports (E). Align bolt holes and insert 4no. 100mm bolts (1no. per
Table Top Support (E)). (See Figs 6a & 6b). Attach washer and nuts.
All nuts to be fully tightened at this stage.
Poppy Round Picnic Table is now complete.

www.zest4leisure.co.uk | 01352 752555 option 1 | [e-mail]
Please take a few moments to check all pack contents listed
Requires 2 person assembly
Tools required: Hammer, corded / cordless drill, pozi–drive bit / screwdriver,
13mm spanner / adjustable spanner.
1a
2
3b
4b
1b
3a
4a
5

www.zest4leisure.co.uk | 01352 752555 option 1 | [e-mail]
Please take a few moments to check all pack contents listed
Requires 2 person assembly
Tools required: Hammer, corded / cordless drill, pozi–drive bit / screwdriver,
13mm spanner / adjustable spanner.
6a 6b