Zest 4 Leisure Moonlight Arch User manual

Assembly Instructions
(W x D x H) 1.40m x 0.80m x 2.23m
Product Name: Moonlight Arch
PLEASE KEEP THIS INSTRUCTION
Zest4Leisure
01352 752555 option 1 –[e-mail]

Moonlight Arch Assembly Instructions
Requires 2 person assembly.All screw holes to be pre-drilled.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, 3mm Drill Bit, Tape
Measure.
Moonlight Arch Pack List
Item Description Quantity
A Arch 2
B Rafter 5
C Post 4
D Trellis Panel 2
Fixings
60mm Screws 18
40mm Screws 8
www.zest4leisure.co.uk

Please take a few moments to check all pack contents listed.
Please contact “Zest4Leisure” directly if any of the pack contents are damaged
or missing. Contact telephone: [phone] option 1 or email:
[email protected]
Assembly requires 2 persons. All screw holes to be pre-drilled.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, 3mm Drill Bit,
Tape Measure.
Moonlight Arch is now complete.
1. Position Rafters B at both ends of Arches A and fix using 4no 60mm Screws - 2
per Rafter (Fig.1a). Space out remaining Rafters B equally (Fig.1b) and attach
using 6no 60mm Screws.
2. Position Post C onto Arch A as shown in Fig.2a (adjust width to suit). Fix in
position using 2no 60mm Screws (Fig.2b).
3. Place Trellis Panel D 400mm from base of Post C and fix in position using 2no
40mm Screws (Fig.3a & 3b).
4. Position second Post C as shown in Fig.4a and fix to Arch A using 2no 60mm
Screws.
Fix Trellis Panel D to second Post C using 2no 40mm Screws (Fig.4b)
Repeat stages 1 to 4 for remaining Posts & Trellis Panel on opposite side of arch.

www.zest4leisure.co.uk
1b1a
2a
4a
2b
3a 3b
4b