Zest 4 Leisure Emily Corner Bench User manual

Assembly Instructions
(W x D x H) 1.86m x 1.86m x 0.935m
Product Name: Emily Corner Bench
Pressure Treated products should not be treated with any other products for the first month.
PLEASE KEEP THESE INSTRUCTIONS
Zest4Leisure
01352 752555 option 1 –[e-mail]
V1-10.17

Emily Corner Bench Assembly Instructions
Requires 2 person assembly.
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, (Hex Bit Included).
Emily Corner Bench Pack List
Item Description Quantity
A SeatAssembly 2
B1, B2 Inner LegAssembly 2
C Outer Leg Assembly 2
D Back Panel 2
E Seat Corner Panel 1
F Seat Corner Back Panel 1
Fixings
110mm Hex Bolts 16
Cross Dowels 8
10mm Nuts 8
70mm Screws 10
www.zest4leisure.co.uk

Please take a few moments to check all pack contents listed.
Assembly requires 2 persons.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, 3mm Drill Bit
required in order for you to drill all screw holes before construction.
Emily Corner Bench is now complete.
1. Position inner LegAssembly B1 (batten outermost) to slots in 1no Seat AssemblyA
and fix using 2no Hex Bolts. (See Fig. 1)
2. Attach 1no Outer Leg Assembly C to Seat AssemblyA as shown in Fig. 2 using
2no Hex Bolts.
3. Insert 4no Cross Dowels into holes to rear of 1no Back Panel D and position
between leg assemblies.Align bolt holes and fix using 4no Hex Bolts (2no per side).
(See Fig. 3)
Repeat Stages 1, 2 & 3 using 1no Seat Assembly A, Inner Leg Assembly B2,
Outer Leg Assembly C & Back Panel D to mirror existing bench assembly.
4. Position bench assemblies as shown in Fig. 4 and attach through batten using 2no
70mm screws.
5. Locate Seat Corner Panel E between benches and attach using 4no 70mm screws.
(See Figs. 5a & 5b)
6. Position Seat Corner Back Panel F as shown in Fig. 6 and attach using 4no 70mm
screws (1no per corner).

www.zest4leisure.co.uk
2
1
3a 3b
45a
5b 6a