Zest 4 Leisure Lisa User manual

Assembly Instructions
(W x D x H) 0.779m x 0.779m x 0.712m
Product Name: Lisa Table
(Part of Set)
PLEASE KEEP THIS INSTRUCTION
Zest4Leisure
01352 752555 option 1 –[e-mail]

Lisa Table Assembly Instructions
Requires 2 person assembly.All screw holes to be pre-drilled.
Tools required: Hex Key (Supplied), Corded / Cordless Drill, Pozi-drive Bit /
Screwdriver, 3mm Drill Bit.
Lisa Table Pack List
Item Description Quantity
A Table Top 1
B Leg 4
C Diagonal Bracing 1
Fixings
Hex Bolt 8
‘T’ Nut 8
Screws 4
www.zest4leisure.co.uk

Please take a few moments to check all pack contents listed.
Please contact “Zest4Leisure” directly if any of the pack contents are damaged
or missing. Contact telephone: [phone] option 1 or email:
[email protected]
Assembly requires 2 persons. All screw holes to be pre-drilled.
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver, 3mm Drill Bit.
Lisa Table is now complete.
1. Position Leg B (Fig.1a) and attach to Table Top A using 2no Hex Bolts and ‘T’ Nuts.
Ensure correct orientation of Hex Bolts and ‘T’ Nuts (Figs.1a & 1b).
Repeat procedure for remaining Legs B.
2. Position Diagonal Bracing C 125mm (nom.) from base of Legs B (Fig.2a) and attach
using 4no Screws.
Ensure all Bolts are fully tightened.

www.zest4leisure.co.uk
1b1a
2a 2b