Zest 4 Leisure Lily Relax Seat 00452 User manual

www.zest4leisure.co.uk | 01352 752555 option 1 | [e-mail]
V6
Assembly Instructions
Lily Relax Seat
(W x D x H) 0.72m x 0.92m x 0.92m
PLEASE KEEP THESE INSTRUCTIONS
Code: 00452
is product is made from pressure-treated timber. It should not be painted
or coated with any other treatment until at least 6 months after purhcase

www.zest4leisure.co.uk | 01352 752555 option 1 | [e-mail]
Lily Relax Seat Assembly Instructions
Requires 2 person assembly
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver,
4mm Hex (Allen) Key, Mallet. 3mm Drill Bit required in order for you to drill
Fixings Quantity
50mm Screws 8
Hex Bolts 6
‘T’ Nuts 6
Lily Relax Seat Pack List
Item Description Quantity
A Back Support Assembly 1
B Seat Assembly 1
C Back Assembly 1
D1/D2 Armrest/Leg Assembly 2

www.zest4leisure.co.uk | 01352 752555 option 1 | [e-mail]
Requires 2 person assembly
Tools required: Corded/Cordless Drill, Pozi-drive Bit/Screwdriver,
4mm Hex (Allen) Key, Mallet. 3mm Drill Bit required in order for you to drill
1. Insert Back Assembly A between rear legs of Seat Assembly B, align bolt holes and insert 2no Hex Bolts
and ‘T’ Nuts. See Figs. 1a, 1b & 1c.
Do not fully tighten at this stage.
2. Locate Back Assembly C as shown in Fig 2a and fix in position using 6no Screws. See Figs 2b & 2c.
3. Position Armrest/Leg Assembly D1 as shown in Fig.3a. Align bolt holes and insert 2no Hex Bolts
and ‘T’ Nuts. See Fig. 3b. Do not fully tighten.
Attach Armrest/Leg Assembly D1 to Back Support Assembly A using 1no Screw. See Fig.3c.
Repeat procedure for Armrest/Leg Assembly D2.
Fully tighten all bolts at this stage.
Lily Relax Seat is now complete.

www.zest4leisure.co.uk | 01352 752555 option 1 | [e-mail]
Requires 2 person assembly
Tools required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, 3mm Drill Bit,
4mm Hex (Allen) Key, Mallet.
1a
1c
2b
1b
2a
2c

www.zest4leisure.co.uk | 01352 752555 option 1 | [e-mail]
Please take a few moments to check all pack contents listed
Requires 2 person assembly
Tool required: Corded / Cordless Drill, Pozi-drive Bit / Screwdriver, (Hex Bit Included)