ZKTeco CL10 User manual

Model: CL10
Version: 1.0
English
Installation Guide

Important Notes
Table of Contents
Please read this Installation Guide carefully before installation
and contact the Customer Care Service if you have any
questions regarding the installation.
1.
To avoid any future service charges that may arise as a result of
incorrect installation, it is recommended that installation
must be performed by a professional technician to prevent
any potential service charges that may occur due to incorrect
installation.
2.
We regularly revise the contents of this Installation Guide and
update our products to enhance the quality and performance
without prior notice.
3.
Do not install the batteries until the lock is installed.
4.
What's in the Box.......................................................................1
Installation Diagram.................................................................2
Installation Procedure..............................................................4
ONE: Slide Opening Installation...............................................4
1 Drill Holes......................................................................................................4
2 Install Outdoor Assembly.........................................................................5
3 Install Indoor Assembly..........................................................................6
4 Install Hook Latch.....................................................................................6
TWO: Push-Pull Opening Installation......................................8
1 Drill Holes......................................................................................................8
2 Install Outdoor Assembly.........................................................................9
3 Install Indoor Assembly........................................................................10
4 Install Hook Latch...................................................................................10

1
What's in the Box
Outdoor Assembly Indoor Assembly Hook Latch
Screw A Screw B Screw C
Screw D Fixed Plate Card
Note: This type of cabinet lock suits the cabinet of thickness
16mm to 20mm. If customization is required, please contact us.

2
Installation Diagram
Slide Opening Installation
Outdoor Assembly
Door
Hook Latch
Cabinet Wall
Screw D
Screw C
Screw B Screw A
Screw A
Fixed Plate
Indoor Assembly

3
Push-Pull Opening Installation
Outdoor
Assembly
Door
Indoor
Assembly
Hook Latch
Screw D
Cabinet Wall
Screw C
Screw B
Fixed
Plate
Screw A
Screw A

4
Installation Procedure
ONE: Slide Opening Installation
1Drill Holes
Drill holes on the cabinet door according to the Slide Opening
Installation Template (Page 12).
Based on the inner-side of the Cabinet Wall
Inner-side of the Cabinet Wall
Door

5
2Install Outdoor Assembly
Attach the Outdoor Assembly to the door by inserting the
cable through the drilled holes.
A.
Place the Fixed Plates to the inner door and use Screw A to fix
them with Outdoor Assembly.
B.
Aimed Threaded Hole
Fixed Plate
Screw A

6
3Install Indoor Assembly
Make sure that the distance between the Indoor Assembly
and the cabinet wall is 22mm.
A.
Secure the Indoor Assembly with Screw B and Screw C.
B.
Screw B Screw C
Inner-side
Cabinet Wall
Cabinet Wall
Based on the inner-side of the Cabinet Wall
4Install Hook Latch
Make sure that the Latch is pointed to the hole of Indoor
Assembly keeping Latch and the hole of Indoor Assembly in
Horizontal level.
A.
Make sure the distance between the Latch and door is 11.3mm.
B.
Secure the Latch with Screw D.
C.

7
Based on the inner-side of the Cabinet Wall
Cabinet Wall
Cabinet Wall
Align the Hook Latch and the hole of
Indoor Assembly when installing
Door
Based on the inner-side of the Cabinet Wall
Screw D

8
TWO: Push-Pull Opening Installation
1Drill Holes
Drill holes on the cabinet door according to the Push-Pull
Opening Installation Template (Page 13).
Cabinet Wall
Door
Based on the inner-side of the Cabinet Wall

9
2Install Outdoor Assembly
Attach the Outdoor Assembly to the door by inserting the
cable through the drilled holes.
A.
Place the Fixed Plates to the inner door and use Screw A to fix
them with Outdoor Assembly.
B.
Door
Cabinet Wall
Aimed Threaded Hole
Fixed PlateScrew A

10
3Install Indoor Assembly
Make sure the distance between the Indoor Assembly and the
cabinet wall is 2.8mm.
A.
Secure the Indoor Assembly with Screw B and Screw C.
B.
4Install Hook Latch
Keeping Latch and the hole of Indoor Assembly in Horizontal
level.
A.
Make sure the distance between the Latch and door is 32mm.
B.
Secure the Latch with Screw D.
C.
Screw B Screw C
Cabinet Wall
Based on the inner-side of the Cabinet Wall
Door
Cabinet Wall

Based on the inner-side of the Cabinet Wall
Cabinet Wall
Align the Hook Latch and the hole of
Indoor Assembly when installing
Door
11
Based on the inner-side
of the Cabinet Wall
Door
Cabinet Wall
Align the Hook Latch and the hole of
the Indoor Assembly when installing
Door
Screw D

12
Slide Opening Installation Template:
Align the Hook Latch and the hole of
the Indoor Assembly when installing
Cabinet Wall
Based on the inner-side of
the Cabinet Wall
Door
Door
inner-side of the
Cabinet Wall
Door
inner-side of the
Cabinet Wall

13
Push-Pull Opening Installation Template:
Align the Hook Latch and the hole of
the Indoor Assembly when installing
Door
The inner-side of
the Cabinet Wall
Based on the inner-side
of the Cabinet Wall
Cabinet Wall
Door
Door
The inner-side of
the Cabinet Wall

Model: CL10
Version: 1.0
English
User Manual

Important Notes
Table of Contents
With factory default settings, only the master password can
unlock.
1.
Please keep your master card at a safe place, and remember
master password.
2.
Do not remove the batteries from the lock while it is working.
3.
It is necessary to replace the batteries when the lock flashes
white light along with a 4 beeps after being turned on.
4.
Product Overview.....................................................................1
Denitions.................................................................................1
How to Use.................................................................................2
1 Reset the Lock..............................................................................................2
2 Activate the Lock .......................................................................................2
3 Set the Master Card..................................................................................2
4 Set the User Card ......................................................................................2
5 Master Card Functions...........................................................................3
6 Delete the User Card................................... ..............................................3
Programming the Features through Menu..............................4
Public Mode...............................................................................5
Password Unlock.............................................................................................5
Card Unlock......................................................................................................5

1
Product Overview
Definitions
User Roles: Th e lo ck is d esigned for two user roles, th e
Administrator and the Use r. The Adm inistrator group has
permission to enter the menu and open the door, but the User
group only has permission to open the door and change the user
password.
Note: The maximum capacity of all user groups shall be 253 (2
Master Cards, 200 User Cards, 1 Master Password: 12345678 (8
digits), and 50 User Passwords (6 digits)).
Initialization: All registered user data will be deleted and
restored to the factory settings, default master password is
12345678.
Usage Modes: The lock works on two modes: Private Mode and
Public Mode. Private Mode is suitable for personnel or high-level
security applications, and Public Mode is suitable for public uses
like Gym’s, Spa’s, Clubs, etc.
Random Password: To secure the password, users may enter
their password with random digits before or after the actual
password. The maximum number of entered digits must be less
than or equal to 12. Example: If the correct password is 123456,
then the random password can be 89123456807, 1234562363,
389123456, etc.
Note: This feature works for Private Mode only.
Emergency Charging: A micro-USB interface is provided at the
bottom of the Outdoor Assembly.

2
Always Open Mode: This function is to always keep the door
open, which is suitable for meeting rooms and places with no
access restrictions.
Low Battery Warning: If the battery power is low, the lock will
beep five times. In this case, customers can still unlock 100 times.
Please change the batteries in time.
How to Use
1Reset the Lock
Press and hold the Reset Button for 3 seconds; until the lock
beeps long and a red LED flashes rapidly.
2Activate the Lock
Touch the keypad with the back of your hand or fingers to
activate the lock.
3Register the Master Card
Swipe a card to register it as a Master card.
4Register the User Card
A white LED flashes for 8 seconds with a beep.
Note: The first swiped card will be registered as a Master card, and
the second swiped card will be another Master card.
a. Touch a Master Card to unlock.
b. Swipe a card to set the card as a User Card.
A white LED blinks for 8 seconds with a beep.
Note:
1. Register the next user card within 5 secs otherwise, swipe the
Master card again.
2. A maximum of 200 User Cards can be registered.

3
Master Card Functions
5
Unlock, and
register User Cards
Beeps thrice with blinking
Red LED then beeps twice
Function Status
1
7
2
3
5
Delete User Card
Delete lost User Card
Delete all User Cards
Initialize
Beeps once
White LED blinks
Beeps once
Red LED blinks
Beeps twice
Red LED blinks
Beeps once with blinking
Red LED then beeps twice
Delete User Card
6
1. Delete a single User Card
Swipe the Master Card twice, then swipe the User Card you want
to delete, the red LED blinks for 1 second with three beeps, which
means deletion succeeded. Repeat the above operation to delete
other User Cards.
2. Delete a lost User Card
Swipe the Master Card thrice, then swipe the User Card you want
to delete, the red LED blinks for 1 second with three beeps, which
means deletion succeeded. Repeat the above operation to delete
other User Cards.
3. Delete all User Cards
Swipe the Master Card five times, the red LED blinks for 1 second
with three beeps, which means all the user cards are deleted
successfully.
Swipe
Card Times