ZKTeco ZM100 User manual

ZM100 User Manual 1
USER MANUAL
ZM100 Smart Lock
Version: 1.0
Date: September, 2017

ZM100 User Manual I
Read Before Use ............................................................................................................................................................................................ 1
Safety Cautions................................................................................................................................................................................... 1
Position and Gesture ...................................................................................................................................................................... 2
Facial Expression................................................................................................................................................................................ 2
Eyes Position ........................................................................................................................................................................................ 3
Method for Using the Touch Screen..................................................................................................................................... 3
Method for Pressing Fingerprint ............................................................................................................................................. 4
Structure................................................................................................................................................................................................. 5
Add and Manage User.............................................................................................................................................................................. 6
To Enter Main Menu........................................................................................................................................................................ 6
Enroll User.............................................................................................................................................................................................. 9
Registering Face [Main Menu > New User > Face]....................................................................................... 10
Enrolling fingerprints [Main Menu > New User > Enroll Fingerprint]............................................... 10
Registering Passcode (Main Menu > New User > Passcode) ................................................................. 11
Contents

II ZM100 User Manual
Registering Card [Main Menu > New User > Card] ...................................................................................... 13
User Manage..................................................................................................................................................................................... 13
Modifying User Information [Main Menu > User Manage] ..................................................................... 14
Deleting User Information [Main Menu > User Manage]......................................................................... 14
Quick Operation Guide.......................................................................................................................................................................... 15
Unlocking by Face......................................................................................................................................................................... 15
Unlocking by passcode.............................................................................................................................................................. 15
Unlocking by fingerprint........................................................................................................................................................... 16
Unlocking by card ......................................................................................................................................................................... 17
Time/Date [Main Menu > System> Time/Date]......................................................................................................... 17
USB Disk Management............................................................................................................................................................... 18
Downloading all records [Main Menu > USB Disk Management > Download Record Data]
....................................................................................................................................................................................................... 18
Downloading/Uploading User Data [Main Menu > USB Disk Management >
Download/Upload User Data] ................................................................................................................................... 19
Upgrading Firmware [Main Menu >> USB Disk Management > Firmware Upgrade]........... 19

ZM100 User Manual III
Data Management........................................................................................................................................................................ 19
Querying Records [Main Menu > Data Management > Record Query]......................................... 20
Querying Alarms [Main Menu > Data Management > Alarm Query].............................................. 20
System Information...................................................................................................................................................................... 21
Other Functions ......................................................................................................................................................................................... 23
Normal Open [Main Menu > System > Operate Setting] .................................................................................... 23
[Operate Alarm] & [Error Times] [Main Menu > System > Operate Setting]............................................. 23
[AutoLock Time] [Main Menu > System > Operate Setting] .............................................................................. 23
[Verify Mode] [Main Menu > System > Operate Setting> Verify Mode]..................................................... 24
Initialization Setting ..................................................................................................................................................................... 24
Restart Key.......................................................................................................................................................................................... 25
Advanced Settings [Main Menu > System > Advanced Settings].................................................................. 25
Restoring Factory Settings [Main Menu > System > Advanced Settings]................................................. 26
USB Disk Connection................................................................................................................................................................... 26
Low Power Alarm........................................................................................................................................................................... 26
Emergency Power Supply........................................................................................................................................................ 26

IV ZM100 User Manual
Mechanical key................................................................................................................................................................................ 27

ZM100 User Manual 1
Read Before Use
Safety Cautions
1. New lock cannot unlock with ANY verification. Please register one administrator at least first, if
there is no any administrator, registration for normal users is not allowed.
2. The lock is equipped with mechanical keys for manually unlocking. Please keep the mechanical
keys in a safe place.
3. Please replace the battery once the lock prompts "Low Battery". Please use the original charger
to charge.
4. It's forbidden to remove the battery, if you need to replace with newly-bought battery, please
operate under the guidance of professional technique person.
5. Without any operation, the lock will power off automatically within 10 seconds.
6. Keep your fingers, screen and camera clean when using this lock.

2ZM100 User Manual
If the user height is
1.35-1.80m, the
height from handle
centerline to ground
is 1m.
Position and Gesture
Facial Expression
During enrollment and verification, keep the facial expression natural. Do not use exaggerated
expressions (such as staring, grinning, and wagging tongue).

ZM100 User Manual 3
Eyes Position
During registration and verification, it is required to adjust your upper body to fit your eyes into the
green frame on the screen.
Method for Using the Touch Screen
Click the touch screen with your finger pulp and keep your fingers and screen clean during use.

4ZM100 User Manual
Method for Pressing Fingerprint
Recommended fingers: The index finger, middle finger or ring finger; avoid using the thumb and
little finger (because they’re usually clumsy during pressing). Press with your finger right on the
fingerprint gathering window, with the fingerprint’s center aligning to the center of the gathering
window as much as possible.
Note: Please use the correct method of pressing fingerprint for registration and verification.
Our company does not undertake the responsibility for the lowered verification performance
caused by user’s improper operation. The rights to final interpretation and amendment are reserved.
Vertical Sides
Slanted Too Low

ZM100 User Manual 5
Structure
Front
Back
Bottom
10 Silicon
cover (
Please use
tweezers or screwdrivers to o
pen
)
11
USB patch cord interface
12 Charging interface
13 Charging indicator (red indicates
being charged, and green indicates
fully charged)
14 Reset key
15
Anti-cat's eye key (optional)
16 Manual Knob
1
2.8 Inch Color Screen
2 Touch
-screen awakening key
3
Camera
4 Fingerprint Sensor
5 Handle
6 Card Detection Area
7
Mechanical Key Hole
8 9V battery Interface
9 Restart key

6ZM100 User Manual
To Enter Main Menu
When no administrator is registered in the device, the process of entering Main Menu is as
follows:
Press the touch-screen awakening key to access the main page.
Enter “face recognition” screen automatically.
Click the screen to enter "password verification".
Click the return key to enter the main screen.
Click the menu key to access Main Menu.
Add and Manage User

ZM100 User Manual 7
When an administrator is registered in the device, identity verification is needed for entering
Main Menu. The process is as follows:
Press the touch-screen awakening key to access the main page.
Enter “face recognition” screen automatically.
Click the screen to enter "password verification".
Click the return key to enter the main screen.
Click the menu key to enter "admin confirm", then verified by the admin (face / password /
card).
After the verification is successful, the system displays a success prompt and automatically
enters Main Menu.

8ZM100 User Manual

ZM100 User Manual 9
Enroll User
User No. The number of a new user. 1-65535 is supported by default. The number
cannot be modified after the user is registered.
User Role
Normal user A normal user can perform only comparison and
unlocking
Administrator
Unable to register the super administrator
Unable to modify the rights of super administrator
Unable to perform data query
Unable to access the Advanced Options
Unable to upload user data and update the firmware
Super administrator
All operations are available
A user is a normal user by default
Note:
After registering the information of a new user, you must press the
touch-screen awakening key, and click [OK] on the page displayed for
saving. If you click [Cancel], all registered information will not be saved.
The first registered user must be a super administrator. If the first user is an
administrator or a normal user, the system displays the prompt "The first
registered user must be a super administrator. Do you want to set this user
as a super administrator? Click [OK] to set the user as a super
administrator."

10 ZM100 User Manual
Registering Face [Main Menu > New User > Face]
Please focus eyes inside the green box, adjust the positions of the eyes by moving them up and
down and left and right. There is a progress bar at the bottom of the page.
After the face is successfully registered, the system automatically goes to the New User page. You
can register other methods.
Enrolling fingerprints [Main Menu > New User > Enroll Fingerprint]
Please place a finger on the fingerprint scanner.
When "Place your finger second time" is displayed on the screen, move your finger away, and
place the finger; so on and so forth.

ZM100 User Manual 11
After the fingers are successfully registered for three times, the system automatically goes to the
New User page. You can register other methods.
Note: You should not register the same finger repeatedly; otherwise, the system displays the
prompt "The fingerprint already exists. Please try again."
Registering Passcode (Main Menu > New User > Passcode)
Click the [Enter 6 digits Passcode] column, enter the passcode, and click [OK].
Click the Confirm Passcode column, enter the passcode again for confirmation, and then click
[OK].
Click OK to return to the New User page. You can register other methods.

12 ZM100 User Manual
Note:
The passcode length must be 6 digits. If there are less than 6 digits, the prompt "input length
error" is displayed. When there are more than 6 digits, the prompt "input error" is displayed.
The passcodes registered by different users must be different; otherwise, the system displays
the prompt "duplicate passcode".
If the two passcodes entered are different, the system displays the prompt "The input
passcodes are inconsistent".
If you enter an incorrect passcode, you can click the backspace key to clear the passcode,
and enter it again.

ZM100 User Manual 13
Registering Card [Main Menu > New User > Card]
User Manage
Modifying user information
Modify the rights and identification
methods of registered users.
Deleting user information
Delete a user.

Note: If a user is not in the list, you can click the up/down triangle
on the scrolling bar on the right for query, or directly drag the scrolling
bar for query.
Place a card at the card swiping area. After you hear a beep, the
system automatically returns to the New User page. Click [Save].
Note:
If the card has been registered, the system displays the prompt
"Card has been registered".
Supported card types include RF cards, ID cards, and NFCs.

14 ZM100 User Manual
Modifying User Information [Main Menu > User Manage]
Click a user to be modified, and access the User Information page.
Click [Rights] to modify user rights. Click [Face] to register face again. Click Enroll Fingerprint to
register fingerprints again. Click [Passcode] to register passcodes again. Click [Card] to register
cards again. For the registration processes, see the New User.
After the modification is completed, you must press the touch-screen awakening key, and click
[OK] on the page displayed for saving. If you click [Cancel], the modification will be discarded.
Deleting User Information [Main Menu > User Manage]
Be cautious in deleting data!
Click a user to be modified, and access the User Information page.
Click the deletion icon on the upper right corner to delete the user.

Note: An administrator can modify the rights of the administrator
and normal users. A super administrator can modify the rights of all users.

ZM100 User Manual 15
Quick Operation Guide
Unlocking by Face
Press the touch-screen awakening key. The system automatically enters "face recognition". After the
recognition is successful, the lock is unlocked.
Unlocking by passcode
Press the touch-screen awakening key. The system automatically enters "face recognition". Click the
screen to enter "passcode verification", and enter the 6-digit passcode. After the recognition is
successful, the lock is unlocked.