ZOLL AED 3 User manual

Quick Start Guide

Thank you for selecting the ZOLL AED 3™as your automated external defibrillator, the
most advanced AED in the world today. Follow these simple instructions to set up your
AED 3 in just a few minutes. Once setup is complete, note your serial number and log
on to www.zollaed3.com to register your AED 3 for an extended warranty.
If you have any questions or concerns, please contact ZOLL at [phone] or
email us at tser[email protected] or contact the authorized distributor you
purchased your AED 3 from.
Welcome
3

Documentation folder:
• Quick Start Guide
• PlusTrac™Activation Certificate
• ZOLL AED 3 Rescue Reference Guide/Poster
• ZOLL AED 3 Operator’s Manual
In the Box:
• ZOLL AED 3
• Documentation folder
• CPR Uni-padz™
• ZOLL AED 3 Battery
Contents
54

Log on to: www.zollaed3.com to:
• Register for your free 2-year extended warranty
• Set up your PlusTrac account using your PlusTrac Activation Certificate,*
which qualifies you for the first year of PlusTrac at no cost
• Track the readiness of your AED 3
• Track the training of your responders
• Manage your AED program online
• Get e-minders and alert notifications
• Allow your AED 3 to regularly report self-test results to
PlusTrac via your local Wi-Fi network
• Receive information on setting up your ZOLL Online Account for the
upload and management of clinical event data in ZOLL Case Review™
*activation certificate included in documentation folder
Setting up your ZOLL AED 3Complete AED Registration
76
Remove all contents from the shipping container.
®

Remove the CPR Uni-padz from their protective box.
Plug the CPR Uni-padz cable connector into the AED 3 electrode port.
98
Remove the AED 3 battery from the shipping container. Hold the battery by
the side tabs with the label facing out. Insert the battery into the back of the
AED until it clicks into place, lining up the notch on the end of the battery
to the corresponding shape in the battery well.
<8 Years(< 55lbs/25kg)
™
2
1

<8 Years (< 55lbs/25kg)
™
2 1
The ZOLL AED 3 will perform an automatic self-test. While the self-test is running, insert
the CPR Uni-padz into the back of the AED so that the label on the package faces you.
1110
Following the completion of the AED 3 self-test, confirm that it passed by listening
for the audible prompt “Unit OK” or looking for the green check symbol in the status
indicator window. Your AED 3 is now ready for use. If you have any questions,
please refer to the operator’s manual included in the documentation folder.
®
®

Questions:
Contact ZOLL Technical Service or your
local authorized ZOLL representative
ZOLL Technical Service:
Telephone: [phone]
Email: tser[email protected]
9650-000753-01 Rev. A