2N IP Verso User manual



Installation manual 2N® IP
Verso

v.2.17
www.2n.com





Installation manual 2N® IP Verso
2 / 241
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Content:
1. Product Overview
1.1 Components and Associated Products
1.2 Terms and Symbols
2. Description and Installation
2.1 Before You Start
2.2 Mechanical Installation
2.2.1 One Module Box
2.2.2 Two Module Box
2.2.3 More Two Module Boxes
2.2.4 Three Module Box
2.2.5 More Three Module Boxes
2.2.6 Tamper and I/O Modules
2.2.7 Module Dimensions
2.2.8 Example of Mounting Plate Installation
2.3 Electric Installation
2.3.1 Overvoltage Protection
2.4 Extending Module Connection
2.5 Completion
3. Function and Use
3.1 Configuration
3.2 Intercom Control as Viewed by External User
3.3 Touch Display Intercom Control As Viewed by External User
3.4 Intercom Control as Viewed by Internal User
3.5 Maintenance
3.6 Downloads
4. Technical Parameters
4.1 General drawings
5. Supplementary Information
5.1 Troubleshooting
5.2 Directives, Laws and Regulations
5.3 Other Countries' Legislation
5.4 General Instructions and Cautions


Installation manual 2N® IP Verso
3 / 241
•
•
1. Product Overview
Here is what you can find in this section:
1.1 Components and Associated Products
1.2 Terms and Symbols
Basic Features
2N®IP Versois an elegant and reliable intercom equipped with lots of useful functions. Thanks
to SIP support and compatibility with major brands of PBX manufacturers, it can benefit from
using VoIP networks.2N®IP Versocan be used as a door or special purpose intercom for office
buildings, residential areas and other applications.
2N®IP Versois a modular system: the user determines its configuration according to the needs
of the particular installation. Unlike other intercoms,
2N®IP Versois not delivered as a compact unit. After choosing the installation mode and
particular modules, the user gets separate parts to be assembled using the plug&play
connections. This approach allows for unique individual combinations and also leaves space for
adding of additional modules later on.
Wide angle HD camera– allows the tenant to see the calling person on his or her videophone or
PC screen in high resolution. The camera itself is hidden behind a darkened glass, so it is not
visible. The intercom is equipped with night vision, which automatically selects the night/day
mode according to light.
Quick dial buttons– there are 146 quick dial buttons in total in multiple button modules. For
each button, up to three separate phone numbers plus substitute users can be defined, which
ensures that the called user is reached whenever needed. The buttons are backlit with a clear
mechanical response. The nametag surface is scratch resistant.
Keypad– is a keypad module that allows the user to use the intercom as a code lock and dial a
phone number or phonebook position of the called user.
RFID card reader– thecard reader module brings the access control functionality according to
the RFID card or keyfob. With the advanced features, other functions can be RFID card controlled
too.
Electric lock control– as part of the access system, the electrical lock can be controlled by a
code entered on the keypad or the called phone, with the RFID card, via a PC application, etc.
When necessary, more electrical outputs can be added. Numerous parameters allow for a wide
spectrum of applications.
Robustness–2N®IP Versois designed as a vandal resistant intercom, which withstands
mechanical or weather conditions with no need to purchase extra accessories.
Audio quality– using the automatic echo cancelling system, full duplex communication is
available at any time.

Installation manual 2N® IP Verso
4 / 241
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
The installation of2N®IP Versois very easy, all you have to do is assemble the required parts
and modules and attach the network cable. The modules are plug&play, so there is no need to
configure them manually. The intercom can be supplied from a 12 V DC power source, or using a
PoE switch.
Use your PC with any internet browser to configure2N®IP Verso orapply the2N®Access
Commanderto configure extensive installations of multiple intercoms.
Advantages of Use
Elegant design
Weather resistant
Various modes of installation (flush, surface, plasterboard)
Sensitive microphone and loud speaker
Both-way audio communication – acoustic echo cancellation
Integrated colour HD camera with wide-angle lense and hidden night vision
Selectable number of quick dial buttons with nametags and backlight
Optional numeric keypad with backlight
Option to have multiple modules of the same kind – for example, card reader for both
entering and leaving the building
Integrated switches of electric locks with wide setting options
Optional integrated RFID card reader module
PoE or 12 V DC power supply
Configuration using web interface or dedicated PC application
VoIP standard SIP 2.0 support
10 000 Phone Book positions
20 user time profiles
Video codecs (H.263, H.263+, H.264, MPEG-4, MJPEG)
Audio codecs (G.711, G.729, G.722, L16/16kHz)
HTTP server for configuration
SNTP client for time synchronisation
RTSP server for audio and video streaming, ONVIF compatible
SMTP client for email sending, Picture to Email feature
TFTP/HTTP client for automated firmware and configurationupgrade and update
1.1 Components and Associated Products
Main Units

Installation manual 2N® IP Verso
5 / 241
•
•
•
•
•
2N Part
No.9155101
Axis Part No.
01271-001
Main unit
There must be just one (with/without a camera) main unit in every
installation. The main unit installation requires two frame/box
positions; the other position, however, is left for additional module
installation.
2N Part
No.9155101B
Axis Part No.
01272-001
Main unit
There must be just one (with/without a camera) main unit in every
installation. The main unit installation requires two frame/box
positions; the other position, however, is left for additional module
installation.
We do not recommend that the device should be installed where
exposed to direct sunlight

Installation manual 2N® IP Verso
6 / 241
•
•
•
•
•
•
•
2N Part
No.9155101C
Axis Part No.
01273-001
Main unit with camera
HD camera
There must be just one (with/without a camera) main unit in every
installation. The main unit installation requires two frame/box
positions; the other position, however, is left for additional module
installation.
2N Part
No.9155101CB
Axis Part No.
01274-001
Main unit
HD camera
There must be just one (with/without a camera) main unit in every
installation. The main unit installation requires two frame/box
positions; the other position, however, is left for additional module
installation.
We do not recommend that the device should be installed where
exposed to direct sunlight.

Installation manual 2N® IP Verso
7 / 241
•
•
•
•
•
•
Frames
2N Part
No.9155011
Axis Part No.
01278-001
Flush mounting frame
1 module
Covering frame for the 1-module brick/plasterboard flush
mounting box. The 1-module frame is used when another module
is added to the existing installation or when the module is
mounted to an extended interconnecting cable for an outgoing
reader, for example. Remember to order the frame when you order
a 1-module flush mounting box, Part No. 9155014.
2N Part
No.9155011B
Axis Part No.
01279-001
Flush mounting frame
1 module
Covering frame for the 1-module brick/plasterboard flush
mounting box. The 1-module frame is used when another module
is added to the existing installation or when the module is
mounted to an extended interconnecting cable for an outgoing
reader, for example. Remember to order the frame when you order
a 1-module flush mounting box, Part No. 9155014.
•
•
Caution
There must be just one (with/without a camera) main unit in every installation. The
main unit installation requires two frame/box positions; the other position,
however, is left for additional module installation.
One blind module is supplied with the main unit.


Installation manual 2N® IP Verso
8 / 241
•
•
•
2N Part
No.9155012
Axis Part No.
01281-001
Flush mounting frame
2 modules
Covering framefor the 2-module brick/plasterboard flush
mounting box. Remember to order the frame when you order a 2-
module flush mounting box, Part No. 9155015.

Installation manual 2N® IP Verso
9 / 241
•
•
•
2N Part
No.9155012B
Axis Part No.
01282-001
Flush mounting frame
2 modules
Covering framefor the 2-module brick/plasterboard flush
mounting box. Remember to order the frame when you order a 2-
module flush mounting box, Part No. 9155015.

Installation manual 2N® IP Verso
10 / 241
•
•
•
2N Part
No.9155013
Axis Part No.
01282-001
Flush mounting frame
3 modules
Covering frame for the 3-module brick/plasterboard flush
mounting box.Remember to order the frame when you order a 3-
module flush mounting box, Part No. 9155016.

Installation manual 2N® IP Verso
11 / 241
•
•
•
•
•
•
2N Part
No.9155013B
Axis Part No.
01283-001
Flush mounting frame
3 modules
Covering frame for the 3-module brick/plasterboard flush
mounting box.Remember to order the frame when you order a 3-
module flush mounting box, Part No. 9155016.
2N Part
No.9155021
Axis Part No.
01287-001
Surface mounting frame
1 module
The 1-module frame is used when another module is added to the
existing installation or when the module is mounted to an
extended interconnecting cable for an outgoing reader, for
example.

Installation manual 2N® IP Verso
12 / 241
•
•
•
•
•
2N Part
No.9155021B
Axis Part No.
01288-001
Surface mounting frame
1 module
The 1-module frame is used when another module is added to the
existing installation or when the module is mounted to an
extended interconnecting cable for an outgoing reader, for
example.
2N Part
No.9155022
Axis Part No.
01289-001
Surface mounting box
2 modules

Installation manual 2N® IP Verso
13 / 241
•
•
•
•
2N Part
No.9155022B
Axis Part No.
01290-001
Surface mounting box
2 modules
2N Part
No.9155023
Axis Part No.
01291-001
Surface mounting box
3 modules

Installation manual 2N® IP Verso
14 / 241
•
•
2N Part
No.9155023B
Axis Part No.
01292-001
Surface mounting box
3 modules
•
Tip
The 1-module frame is used when another module is added to the existing
installation or when the module is mounted to an extended interconnecting cable
for an outgoing reader, for example.

•
•
•
•
Tip
Be sure to order the covering frame for the flush or plasterboard mounting box
together with the flush mounting box.
1-module frame (Part No. 9155011) – 1-module flush mounting box (Part No.
9155014)
2-module frame (Part No. 9155012) –2-module flush mounting box (Part No.
9155015)
3-module frame (Part No. 9155013) –3-module flush mounting box (Part No.
9155016)


Installation manual 2N® IP Verso
15 / 241
•
•
•
•
•
•
Extending Modules
2N Part No.9155030
Axis Part. No. 01252-001
2N® IP Verso– Info panel
The Infopanel module helps you place such
information into the intercom installation as house
number, opening hours and similar data. The
Infopanel backlight is software controlled.
2N Part No.9155031
Axis Part No. 01253-001
2N® IP Verso– Keypad
The numeric keypad module helps you dial users via
their phonebook positions or phone numbers, control
the lock and use other code-accessible functions. The
keypad digits and symbols are backlit.
2N Part No.9155031B
Axis Part No. 01254-001
2N® IP Verso– Keypad
The numeric keypad module helps you dial users via
their phonebook positions or phone numbers, control
the lock and use other code-accessible functions. The
keypad digits and symbols are backlit.

Installation manual 2N® IP Verso
16 / 241
•
•
•
•
•
•
•
•
•
•
•
•
2N Part No.9155047
Axis Part No. 01277-001
2N® IP Verso– Touch keypad
The numeric touch keypad module helps you dial
users via their phonebook positions or phone
numbers, control the lock and use other code-
accessible functions. The keypad digits and symbols
are backlit.
2N Part No.9155081
Axis Part No. 01636-001
2N®IP Verso – Touch keypad & RFID reader 125kHz,
13.56MHz, NFC/HCE
The touch keypad and card reader module provides
you with access control via contactless cards or
keyfobs. The module supports the following 125 kHz
and 13.56 MHz cards or other carriers (only the card
serial number is read):
125 kHz
EM4xxx
13.56 MHz
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
FeliCa
ST SR(IX)
2N®Mobile Key

Installation manual 2N® IP Verso
17 / 241
•
•
•
•
•
•
•
•
•
•
2N Part No.9155082
Axis Part No. 01637-001

2N®IP Verso – Bluetooth & RFID reader 125kHz,
13.56MHz, NFC/HCE
The Bluetooth and card reader module provides you
with access control via contactless cards or keyfobs.
The module supports the following 125 kHz and 13.56
MHz cards or other carriers (only the card serial
number is read):
125 kHz
EM4xxx
13.56 MHz
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
FeliCa
ST SR(IX)
2N®Mobile Key

Installation manual 2N® IP Verso
18 / 241
•
•
•
•
•
•
•
•
•
•
•
2N Part No.9155083
Axis Part No. 01638-001

2N®IP Verso – Touch keypad & RFID reader 125kHz,
secured 13.56MHz, NFC/HCE
The touch keypad and card reader module provides
you with access control via contactless cards or
keyfobs. The module supports the following 125 kHz
and 13.56 MHz cards or other carriers (only the card
serial number is read):
125 kHz
EM4xxx
13.56 MHz
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
FeliCa
ST SR(IX)
2N®Mobile Key
HID SE (Seos, iClass SE, Mifare SE)

Installation manual 2N® IP Verso
19 / 241
•
•
•
•
•
•
•
•
•
•
•
2N Part No.9155084
Axis Part No. 01639-001

2N®IP Verso – Bluetooth & RFID reader 125kHz,
secured 13.56MHz, NFC/HCE
The Bluetooth card reader module provides you with
access control via contactless cards or keyfobs. The
module supports the following 125 kHz and 13.56 MHz
cards or other carriers (only card serial number is
read):
125 kHz
EM4xxx
13.56 MHz
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
FeliCa
ST SR(IX)
2N®Mobile Key
HID SE (Seos, iClass SE, Mifare SE)

Installation manual 2N® IP Verso
20 / 241
2N Part No. 9137422E
Axis Part No. 01402-001
2N®IP external Bluetooth reader (USB interface)
An external Bluetooth reader connecting to your
computer via USB.
It can be used to pair new users who want to use their
smartphones and 2N®Mobile Key application for access
to controlled areas.
A USB driver is required for the external reader to work
properly.