3M Aqua-Pure AP200 User manual

At a Glance:
• Reduces sediment*and chlorine taste & odor
• Space saving compact design
• Premium performance dual action AP217 cartridge included
• Mounting bracket included
• Made from FDA CFR-21 Compliant materials
Applications:
• Chlorine Taste & Odor
• Sediment*
Product Benefits:
• Space saving design provides easy installation under sink or in confined spaces
• System provides high flow rate to 2 gpm to all standard kitchen and bathroom faucets
• Provides multi-stage filtration process for clearer, cleaner, better tasting water with
high efficiency chlorine taste & odor and sediment* reduction in one system
• Designed with specially formulated high-adsorption activated carbon to provide
effective filtration of unwanted tastes, odors and chlorine
• Premium performance pre-filter helps provide longer life and high sediment*
removal efficiency
• System tested and certified by NSF International to verify system design and
performance by a recognized third party certifier
• 5 year limited warranty to help provide long-term operation, factory support and service
Models:
AP200
Drinking Water System
Product Specifications:
Spec #
Quantity
AP200
Model No.
(Part No.)
Inlet/
Outlet
Size
Dimensions Approx.
Weight
Flow
Rate
Clean Pressure
Drop
Max.
Water
Temp.
Max.
Water
Pressure
Standard
Repl. Ctg.
No.
Repl.
Ctg. Qty.
Degree of
Filtration
Height Diameter
AP200
(55289-01)
3/8”
NPT
9-13/16”
(24.9 cm)
4-7/8”
(12.4 cm)
2.8 lbs.
(1.3 kg)
2.0 gpm
(7.6 lpm) N/A 100°F (37.8°C)
125 psi
(862 kPa) AP217 1 5 micron nominal
* Not tested or certified by NSF

a 3M company
CUNO Incorporated
400 Research Parkway
Meriden, CT 06450 U.S.A.
Toll Free: 1.800.222.7880
Worldwide: 203.237.5541
Fax: [phone]
www.aquapure.com • www.cuno.com
CUNO and Aqua-Pure are trademarks of 3M Company used under license.
NSF is a trademark of NSF International.
© 2007 3M Company. All rights reserved.
LITAP200 0607
Physical Specifications:
• Standard 3/8” NPT inlet/outlet connections
• System is a single vessel design
• System is manufactured from FDA CFR-21 compliant materials
• System has maximum operating pressure of 125 psi (862 kPa)
and operating temperature of 100°F (37.8°C)
• System to be installed on primary kitchen or bath cold water faucet
WARNING: Do not use with water that is microbiologically unsafe
or of unknown quality without adequate disinfection before or
after the system. The contaminants or other substances removed
or reduced by this water filter are not necessarily in all users water.
CUNO Incorporated recommends regularly scheduled maintenance
and replacement of the filter cartridge(s) in order for the product to
perform as advertised/sold. Change the filter cartridge at least ev-
ery 6 months. Improper installation and maintenance may result
in property damage due to water leakage.
Spec #
Quantity
Model Number
Part Number
Easy Installation:
Limited Warranty:
CUNO Incorporated warrants that this product is free from defects in materials and workmanship. This limited warranty,
together with any and all warranties implied by law, shall be limited to a period of five (5) years from the date of original
purchase. This limited warranty does not apply to failures that result from abuse, misuse, alteration or damage not caused
by CUNO or failure to properly comply with these installation or cartridge change-out instructions. This limited warranty is
subject to exclusions and limitations. Please refer to the Warranty Card provided with the product for details.
Distributed by:
AP200
Visit www.nsf.org for
the claims associated
with products that
are NSF listed.
Replacement Cartridge Options
Model Sediment
Load
Nominal
Micron
Rating
Application
Flow Rate
Sediment* Chlorine Taste &
Odor
AP217 Normal 5 •• 2 gpm (7.57 lpm)
* Not tested or certified by NSF
4-7/8”
(12.4 cm)
9-13/16”
(24.9 cm)
CAUTION: Diagram shown is for reference purposes
only. Read installation and operation manual prior to
installing the unit.
nehctiKmoorhtaB
Water Meter
Public
Water
Supply
Well
Water
Supply
A
Pressure Tank
Well
Supply
Only
Pump