Aaeon PCM-8152 User manual

Compact Board PCM-8152
PCM-8152
Intel® Pentium®M / Celeron®M Processors
One DDR 266/333 SDRAM DIMM
48-bit Dual Channel LVDS TFT LCD
AC97 3D Surround 5.1Channel
4 USB 2.0 / 4 COMs / Digital IO
PCM-8152 Manual Rev.A 1st Ed.
Nov. 2006

Compact Board PCM-8152
i
Copyright Notice
This document is copyrighted, 2006. All rights are reserved. The
original manufacturer reserves the right to make improvements
to the products described in this manual at any time without
notice.
No part of this manual may be reproduced, copied, translated,
or transmitted in any form or by any means without the prior
written permission of the original manufacturer. Information
provided in this manual is intended to be accurate and reliable.
However, the original manufacturer assumes no responsibility
for its use, or for any infringements upon the rights of third
parties that may result from its use.
The material in this document is for product information only
and is subject to change without notice. While reasonable
efforts have been made in the preparation of this document to
assure its accuracy, AAEON assumes no liabilities resulting
from errors or omissions in this document, or from the use of the
information contained herein.
AAEON reserves the right to make changes in the product
design without notice to its users.

Compact Board PCM-8152
ii
Acknowledgments
All other products’ name or trademarks are properties of their
respective owners.
 Award is a trademark of Award Software International, Inc.
 CompactFlash™ is a trademark of the Compact Flash
Association.
 Intel®, Pentium®M, and Celeron®M are trademarks of Intel®
Corporation.
 Microsoft Windows®is a registered trademark of Microsoft Corp.
 ITE is a trademark of Integrated Technology Express, Inc.
 IBM, PC/AT, PS/2, and VGA are trademarks of International
Business Machines Corporation.
 SoundBlaster is a trademark of Creative Labs, Inc.
All other product names or trademarks are properties of their
respective owners.

Compact Board PCM-8152
iii
Packing List
Before you begin installing your card, please make sure that the
following materials have been shipped:
• 1 9657666600 Jumper Cap
• 1 1759200157 CPU Cooler Fan + Heatsink (For
Socket type only)
• 1 PCM-8152 CPU Card
• 1 Quick Installation Guide
• 1 CD-ROM for manual (in PDF format) and drivers
If any of these items should be missing or damaged, please
contact your distributor or sales representative immediately.

Compact Board PCM-8152
iv
Contents
Chapter 1 General Information
1.1 Introduction................................................................1-2
1.2 Features....................................................................1-3
1.3 Specifications............................................................1-4
Chapter 2 Quick Installation Guide
2.1 Safety Precautions....................................................2-2
2.2 Location of Connectors and Jumpers .......................2-3
2.3 Mechanical Drawing..................................................2-5
2.4 List of Jumpers..........................................................2-7
2.5 List of Connectors .....................................................2-8
2.6 Setting Jumpers ........................................................2-10
2.7 ATX Emulation AT Power Function (JP1).................2-11
2.8 Audio Out Selection (JP2).........................................2-11
2.9 LCD Voltage Selection (JP3) ....................................2-11
2.10 COM4 Ring/+5V/+12V Selection (JP4)...................2-11
2.11 COM3 Ring/+5V/+12V Selection (JP5)...................2-12
2.12 Clear CMOS (JP6) ..................................................2-12
2.13 TV_Out Connector (CN1)........................................2-12
2.14 Audio SPDIF Connector (CN2)...............................2-13
2.15 LVDS Connector (CN4)...........................................2-13
2.16 ATX Power Connector (CN5)..................................2-14
2.17 Extension LVDS Connector (CN6) (optional)..........2-14

Compact Board PCM-8152
v
2.18 DVI Connector (CN7)..............................................2-15
2.19 Audio Connector (CN8)...........................................2-16
2.20 LAN LED Connector (CN9).....................................2-16
2.21 COM 1/2/3/4 Connector (CN10)..............................2-17
2.22 CPU FAN Connector (CN11)..................................2-18
2.23 Digit I/O-1 Connector (CN12)..................................2-18
2.24 Digit I/O-2 Connector (CN13)..................................2-19
2.25 System FAN Connector (CN16)..............................2-20
2.26 IrDA Connector (CN17)...........................................2-20
2.27 Internal Keyboard and Mouse Connector (CN18)...2-20
2.28 Front Panel Connector (CN19) ...............................2-20
2.29 Floppy Connector (FDD1).......................................2-21
2.30 EIDE Connector (IDE1)...........................................2-22
2.31 VGA Display Connector (VGA 1)............................2-23
2.32 LPT Port Connector (LPT1) ....................................2-23
2.33 USB Connector (USB1) .........................................2-24
2.34 USB Connector (USB2) .........................................2-24
Chapter 3 Award BIOS Setup
3.1 System Test and Initialization. ..................................3-2
3.2 Award BIOS Setup....................................................3-3
Chapter 4 Driver Installation
4.1 Installation.................................................................4-3
Appendix A Programming The Watchdog Timer
A.1 Programming .........................................................A-2

Compact Board PCM-8152
vi
A.2 IT8712 Watchdog Timer Initial Program................A-7
Appendix B I/O Information
B.1 I/O Address Map....................................................B-2
B.2 Memory Address Map............................................B-3
B.3 IRQ Mapping Chart................................................B-3
B.4 DMA Channel Assignments...................................B-4

Compact Board PCM-8152
Chapter 1 General Information 1- 1
General
Chapter
1
Information

Compact Board PCM-8152
Chapter 1 General Information 1- 2
1.1 Introduction
AAEON, a leading industrial computer manufacturer, announces a
brand new compact board with legacy interface—PCM-8152. This
model is different from other compact boards on the market, which
is deploying PC/104 interface. This major feature differs from other
competitors making PCM-8152 a unique display in this niche
embedded world.
PCM-8152 equips Intel®Pentium®M, Celeron®M or Mobile Intel®
Celeron®processors with FSB 400MHz. It supports DDR (DDR
266/333) SDRAM DIMM up to 1GB. For Ethernet interface,
PCM-8152 adopts Intel 82551 that supports 10/100Mbps, RJ-45
connector and optional Gigabit Ethernet. PCM-8152 features up
to 48-bit dual channel LVDS TFT LCD, DVI, TV-out. You also can
choose an additional LVDS to meet your versatile application
requirements. In addition, PCM-8152’s plentiful expansion
interfaces, such as PCI slot, Type III Mini PCI socket and PC/104
socket, transcend competitors’ comparable products. These
features reduce customers’ challenges to build systems with
multiple expansion requirements.
Moreover, this model supports one IDE, three RS-232, one
RS-232/422/485 and one parallel port. In addition, it deploys four
USB 2.0, 16-bit digital I/O and IrDA. Flexible expansion
connections are equipped to fulfill various application needs.

Compact Board PCM-8152
Chapter 1 General Information 1- 3
1.2 Features
 Supports Socket 478 Intel®Pentium®M/ Celeron®M up to
1.8GHz/ Onboard Mobile Intel®Celeron®M Processors at
600MHz and 1GHz
 Supports One DIMM DDR 266/333 up to 1GB
 Supports Dual Channel LVDS, DVI and TV-Out, (2nd LVDS
optional)
 Supports One 10/100Mbps Ethernet (Gigabit LAN Optional)
 Supports PCI, Type III Mini-PCI and PC/104
 Supports IDE, RS-232 / 422 / 485, Parallel
 Supports AC97 3D Surround 5.1 Channel
 Supports 4 USB2.0, 16-bit Digital I/O, IrDA

Compact Board PCM-8152
Chapter 1 General Information 1- 4
1.3 Specifications
System
 CPU Supports Socket 478 Intel®
Pentium®M / Celeron®M up to
1.8GHz (400MHz FSB) or onboard
Mobile Intel®Celeron®Processors
at 600MHz & 1GHz
 System Memory 1 x DDR SDRAM DIMM supports
DDR 266/333 up to 1GB
 Chipset Intel® 852GM + ICH4
 I/O Chipset ITE 8712F-A/IX-L
 Ethernet Intel® 82551, 10/100Mbps, RJ-45 x
1 (Gigabit LAN optional)
 BIOS Award Plug & Play BIOS – 512KB
ROM
 Watchdog Timer ITE 8712F-A/IX, generates a
time-out system reset
 H/W status monitoring ITE 8712F-A/IX, supports power
supply voltages, fan speed and
temperature monitoring functions
 Solid Storage Disk One Type II Compact Flash slot
 Expansion Interface Type III Mini-PCI socket x 1, PCI x
1, PC/104 socket x 1
 Battery Lithium battery

Compact Board PCM-8152
Chapter 1 General Information 1- 5
 Power Requirement +5V/ AT/ ATX
 Operating Temperature 32oF~140oF (0oC~60oC)
 Board Size 8”(L) x5.72” (W)
(203mm x 146mm)
 Gross Weight 1.2 lb (0.5kg)
Display: Support: CRT/LCD, CRT/TV, LCD/DVI, CRT/DVI,
LCD/TV & LCD/DVI simultaneous/ dual view display
 Chipset Intel®852GM
 Memory Shared system memory up to
64MB with DVMT
 Resolutions Up to 1600x1200@32bpp for
CRT; Up to 1280x1024@24bpp
for LCD
 LCD Interface Up to 48-bit dual channel LVDS
TFT LCD (24/48-bit optional)
 TV-Out Supports NTSC/PAL, RCA and
S-terminal connector
I/O
 MIO EIDEx1 (UDMA100 x 1), RS-232 x
3, RS-232/422/485 x 1, Keyboard
+ Mouse x1, Parallel x 1
 IrDA One IrDA Tx/Rx header
 Audio MIC-in/ Line-in/ Line-out/
CD-in, S/P DIF in/out, Stereo

Compact Board PCM-8152
Chapter 1 General Information 1- 6
Amplifier included
 USB Two 5x2 pin headers support 4
USB 2.0 Ports
 Digital I/O Support 16-bit (programmable)

Compact Board PCM-8152
Chapter 2 Quick Installation Guide 2 - 1
Chapter
2
Quick
Installation
Guide
Notice:
The Quick Installation Guide is derive
d
f
rom Chapter 2 of user manual. For othe
r
chapters and further installation
instructions, please refer to the use
r
manual CD-ROM that came with th
e
p
roduct.
Part No. 2007815210 Printed in Taiwan, Nov. 2006

Compact Board PCM-8152
Chapter 2 Quick Installation Guide 2 - 2
2.1 Safety Precautions
Always completely disconnect the power cord
from your board whenever you are working on
it. Do not make connections while the power is
on, because a sudden rush of power can
damage sensitive electronic components.
Always ground yourself to remove any static
charge before touching the board. Modern
electronic devices are very sensitive to static
electric charges. Use a grounding wrist strap at
all times. Place all electronic components on a
static-dissipative surface or in a static-shielded
bag when they are not in the chassis

Compact Board PCM-8152
Chapter 2 Quick Installation Guide 2- 3
2.2 Location of Connectors and Jumpers
Component Side
PCI1
DIMM1
CN1
CN7
VGA1
CN2
LAN1
JP2
JP1
CN5
CN4
CN6
JP3
CN8 CN10
JP4 JP5
USB1
LPT1
FDD1 USB2
MPCI1
CN16
CN18
PC104-2
IDE1
CN19
CN17
BT2
CN11
JP6
CN13CN12
CN9
PC104-1

Compact Board PCM-8152
Chapter 2 Quick Installation Guide 2 - 4
Solder Side
CFD1

Compact Board PCM-8152
Chapter 2 Quick Installation Guide 2- 5
2.3 Mechanical Drawing
Component Side
26.50
17.20
17.80
14.40 8.50
0.00
0.00
5.08
5.08
15.56
1.78
34.16
1.27
9.16
32.39
46.47
40.64
67.06
77.61
144.00
111.00
119.44
137.10
126.11
21.96
96.69
148.65
13.08
11.94
40.01
81.41
54.74
82.15
92.88
32.15
40.64
119.38
103.82
133.35
139.07 125.73
89.75
118.37 120.65
94.15
153.67
185.07
1.64
0.00
174.72 170.35
7.26
0.64
20.61
192.77
179.83
38.74
44.45
50.17 64.50
78.74
121.22 129.54
82.36
116.14 125.73 132.08 135.89
190.50
192.77
193.04
184.79
172.89
181.96
193.04
111.29
111.13
114.47
123.19
128.91
140.97
198.12
67.08
117.08
2.540.63
8.90
40.01
1.65
137.16
6.54
1.98
0.64

Compact Board PCM-8152
Chapter 2 Quick Installation Guide 2 - 6
Solder Side
0.00
5.08
5.08
0.00
40.64
193.04
198.12
140.97
193.04
135.89 113.42
156.08
125.73
172.89
40.01
170.35
96.69
40.01
125.73
92.88
119.38
0.00
135.89
40.64
198.12
0.00
135.89
73.27

Compact Board PCM-8152
Chapter 2 Quick Installation Guide 2- 7
2.4 List of Jumpers
The board has a number of jumpers that allow you to configure your
system to suit your application.
The table below shows the function of each of the board's jumpers:
Jumpers
Label Function
JP1 ATX Power to AT Function
JP2 Audio Out Selection
JP3 LCD Voltage Selection
JP4 COM4 Ring/+5V/+12V Selection
JP5 COM3 Ring/+5V/+12V Selection
JP6 Clear CMOS