Aaeon PCM-3536 User manual

PCM-3536 Installation Guide 1
Quick Installation GuideQuick Installation Guide
Quick Installation GuideQuick Installation Guide
Quick Installation Guide
Notice:Notice:
Notice:Notice:
Notice:
This guide is designed for experienced users to
setup the system within the shortest time. For
detailed information, please always refer to the
electronic user's manual.
Safety PrecautionsSafety Precautions
Safety PrecautionsSafety Precautions
Safety Precautions
PCM-3536 For TTL Panel
Part no. 2007353600 1st Ed. Printed in Taiwan Sep. 2001
Quick Installation Guide
Warning! Always completely disconnect the power cord
from your chassis whenever you work with the
hardware.Do notmake connectionswhile the
power is on. Sensitive electronic components can
bedamaged bysudden power surges. Only
experiencedelectronics personnel shouldopen
the PC chassis.
Caution! Always ground yourself to remove any static
chargebefore touching theCPU card.Modern
electronic devices are very sensitive to static
electric charges. As a safety precaution, use a
grounding wrist strap at all times. Place all
electronic components in a static-dissipative
surface or static-shielded bag when they are not
in the chassis.
PCM-3536

PCM-3536
2PCM-3536 Installation Guide BC-599/596
Jumpers
Label Function
J3 LCD Inverter Power Connector
J4 Chipset select
JP4 Chipset select
Connectors
CN2 Hirose DF-13-20P
CN3 Hirose DF-13-10P
CN4 Hirose DF-13-40P
Jumpers & ConnectorsJumpers & Connectors
Jumpers & ConnectorsJumpers & Connectors
Jumpers & Connectors

PCM-3536 Installation Guide 3
Quick Installation GuideQuick Installation Guide
Quick Installation GuideQuick Installation Guide
Quick Installation Guide
PCM-3536 Board Layout
CN1
CN2
CN3
J3
J4
CN4
JP4

PCM-3536
4PCM-3536 Installation Guide BC-599/596
PCM-3536 Mechanical Drawing

PCM-3536 Installation Guide 5
Quick Installation GuideQuick Installation Guide
Quick Installation GuideQuick Installation Guide
Quick Installation Guide
Installing PCM-3536
PCM-3536can be incorporated with fourSBC
manufacturedbyAAEONincluding PCM-6896,
SBC-659, SBC-659P and PCM-6898.
Wheninstallingthe PCM-3536toany ofour singleboard
computers,youmust first findtheDVI connectoronthe
SBC. Pleasereferto eitherthe quickinstallationguide or
manualforexactconnectorlocation.Gentlyandslowly
insertthedaughter card downontothe DigitalVideo
Interface(DVI) connector. Whencomplete the
boardshouldlooksimilartothe pictureonthefollowing
page. Connectors on PCM-3536 should be facing
inwardstoward the board.

PCM-3536
6PCM-3536 Installation Guide BC-599/596
PCM-6896 & PCM-3536

PCM-3536 Installation Guide 7
Quick Installation GuideQuick Installation Guide
Quick Installation GuideQuick Installation Guide
Quick Installation Guide
PCM-6898 & PCM-3536

PCM-3536
8PCM-3536 Installation Guide BC-599/596
LCD Inverter Power Connector (J3)
Built onboard PCM-3536 is a 4-Pin LCD Inverter Power
Connector. By using this Connector you will attain back light
& on screen image for your panel. However you will need to
customize your inverter cable to coexist with this connector.
(J3) Pin definition
Pin Function
1 5V
2 GND
3 GND
4 12V

PCM-3536 Installation Guide 9
Quick Installation GuideQuick Installation Guide
Quick Installation GuideQuick Installation Guide
Quick Installation Guide
Chipset Select (J4 & JP4)
PCM-3536 can be incorporated with four Single Board Computers
manufacturedbyAAEONTechnology. (PCM-6896, SBC-659,
SBC-659Pand PCM-6898). Three ofthese SBCutilizes theIntel
815Echipset,PCM-6896,SBC-659, andSBC-659P. PCM-6898
however is controlled by the VIA 8604 chipset. Due to the
discrepancies between these boards two sets of jumpers (J4, JP4)
must be adjusted to allow for proper compatibility. The diagram
below will guide you through the procedure for setting the
jumpers. Pleasefollow it carefully.
Chipset Select (JP4)
Intel 815E* VIA 8604
1 2 3 1 2 3
Default*
Chipset Select (J4)
Intel 815E* VIA 8604
ON OFF
Default*

PCM-3536
10 PCM-3536 Installation Guide BC-599/596
DVO Interface Pin Definition (CN1)
1A)0KLC_OVD(0KLCTF1B0DTF
2A)1KLC_OVD(1KLCTF2B1DTF
3ACN3B2DTF
4A)ED_OVD(#KNALBTF4BDNG
5A)SH_OVD(CNYSHTF5B3DTF
6A)SV_OVD(CNYSVTF6B4DTF
7ACN7B5DTF
8ADNG8BCN
9A)LCS_CDD(LCSTFV39B6DTF
01A)ADS_CDD(ADSTFV301B7DTF
11ACN11B8DTF
21A)V5(CCV21BCN
31A#TSRICP31B9DTF
41A)V21(CCV41B01DTF
51ANEDDVPF51B11DTF
61ADNG61B)V3.3(CCV
71A)TFV3:L/BMS:H(LESMGP71B)V3.3(CCV
81AADSBMS81BDNG
91ALCSBMS91B)V3.3(CCV
02A)V5(CCV02BNELBPF

PCM-3536 Installation Guide 11
Quick Installation GuideQuick Installation Guide
Quick Installation GuideQuick Installation Guide
Quick Installation Guide
Hirose DF-13-10P (CN3)
1DNG2 DNG
3)63(2-ATADEULBDDO4 )63(3-ATADEULBDDO
5)63(4-ATADEULBDDO6 )63(5-ATADEULBDDO
7)63(6-ATADEULBDDO8 )63(7-ATADEULBDDO
9)63(2-ATADNEERGDDO01)63(3-ATADNEERGDDO
11)63(4-ATADNEERGDDO21)63(5-ATADNEERGDDO
31)63(6-ATADNEERGDDO41)63(7-ATADNEERGDDO
51)63(2-ATADDERDDO61)63(3-ATADDERDDO
71)63(4-ATADDERDDO81)63(5-ATADDERDDO
91)63(6-ATADDERDDO02)63(7-ATADDERDDO
Hirose DF-13-20P Connector (CN2)
1DNG2DNG
3)84(0-ATADEULBDDO4)84(1-ATADEULBDDO
5)84(0-ATADNEERGDDO6)84(1-ATADNEERGDDO
7)84(0-ATADDERDDO8)84(1-ATADDERDDO
9DNG01DNG

PCM-3536
12 PCM-3536 Installation Guide BC-599/596
Hirose DF-13-40P Connector (CN4)
1V5EFASDDV2V5EFASDDV
3DNG4DNG
5V3.3EFASDDV6V3.3EFASDDV
7DNG8DNG
9)84/63/42/81(0-ATADEULBNEVE01)84/63/42/81(1-ATADEULBNEVE
11)84/63/42/81(2-ATADEULBNEVE21)84/63/42/81(3-ATADEULBNEVE
31)84/63/42/81(4-ATADEULBNEVE41)84/63/42/81(5-ATADEULBNEVE
51)84/63/42/81(6-ATADEULBNEVE61)84/63/42/81(7-ATADEULBNEVE
71)84/63/42/81(0-ATADNEERGNEVE81)84/63/42/81(1-ATADNEERGNEVE
91)84/63/42/81(2-ATADNEERGNEVE02)84/63/42/81(3-ATADNEERGNEVE
12)84/63/42/81(4-ATADNEERGNEVE22)84/63/42/81(5-ATADNEERGNEVE
32)84/63/42/81(6-ATADNEERGNEVE42)84/63/42/81(7-ATADNEERGNEVE
52)84/63/42/81(0-ATADDERNEVE62)84/63/42/81(1-ATADDERNEVE
72)84/63/42/81(2-ATADDERNEVE82)84/63/42/81(3-ATADDERNEVE
92)84/63/42/81(4-ATADDERNEVE03)84/63/42/81(5-ATADDERNEVE
13)84/63/42/81(6-ATADDERNEVE23)84/63/42/81(7-ATADDERNEVE
33DNG43DNG
53TUPTUO)KLC_DCL(KLCTFIHS63TUPTUO)SV_DCL(MLF
73TUPTUO)ED_DCL(M83TUPTUO)SH_DCL(PL
933CCV04CN

PCM-3536 Installation Guide 13
Quick Installation GuideQuick Installation Guide
Quick Installation GuideQuick Installation Guide
Quick Installation Guide
Adjusting LCD Resolution for PCM-3536
PCM-3536 supports three different resolution fields, 800 X 600,
640x 480,and 1024x 768. Default settingis setat 800x 600.
Resolution fields may be changes in order to support your LCD
panels. Using MS-DOS you may select the resolution setting of
your choice. Follow the procedure below carefully.
==>Openthe MS-DOS program
==>Type: WEDID_02 (Notice a customized wizard appears)
Youwill beasked tomakeaselectionfroma listofthreeoptions:
1. ForVIA VT8604Chipset
2. ForIntel 815E Chipset
3. Exit
==>Select the type of chipset incorporated with your SBC.
Upon selecting either option 1 or 2 you will be asked to input U1
and U4 file names. According to the resolution of your panel type
enter the follow information under U1 & U4 file name. U1 is used
for onboard programming EDID and U4 functions as a scaling
ROM.
Resolution
InputU1file name: d:\U1_800.bin 800x600
or d:\U1_640.bin 640x480
or d:\U1_1024.bin 1024x768
InputU4filename: d:\U4_800.bin 800x600
or d:\U4_640.bin 640x480
or d:\U4_1024.bin 1024x768

PCM-3536
14 PCM-3536 Installation Guide BC-599/596