Aaeon PER-C10L User manual

Mini-PCI Ethernet Module PER-C10L
PER-C10L QuickInstallationGuide1
Notice
This guide is designed for experienced users to setup the
system in the shortest time.
Safety Precautions
Always completely disconnect the power cord
from your board whenever you are working
on it. Do not make connections while the
power is on, because a sudden rush of power
can damage sensitive electronic
components.
Always ground yourself to remove any static
charge before touching the board. Modern
electronic devices are very sensitive to static
electric charges. Use a grounding wrist strap
at all times. Place all electronic components
on a static-dissipative surface or in a
static-shielded bag when they are not in the
chassis
Part No. 2007C10L12 Printed in Taiwan June 2007

Mini-PCI Ethernet Module PER-C10L
PER-C10L Quick Installation Guide 2
A Message to the Customer
Fist of all, thank you for purchasing PER-C10L Mini PCI
Ethernet module. This Quick Installation Guide will help you
on the process of the installation. Please read it thoroughly
before you start to install it. The product comes with a sheet of
warranty for two years assurances except for improper use.
Therefore, we strongly suggest you to read and refer to the
Quick Installation Guide before any installation. You may visit
AAEON website for the latest version of the instruction.
Please refer to Http://www.aaeon.com

Mini-PCI Ethernet Module PER-C10L
PER-C10L QuickInstallationGuide3
Product Warranty
AAEON Customer Services
All products in AAEON are designed as the strictest specifications to
ensure that the products will own the reliable performance in the
typical industrial environments. Whether your purchase from
AAEON is made to the purpose of the laboratory or the factory
facility, you can be assured that every purchase in AAEON will
provide the reliability and stability of operation. Your satisfaction is
our primary concern. Here is a guide for AAEON's customer services.
Ensure you get the full benefits of our services, please follow the
instructions below step by step.
Technical Support
We require you to get the maximum performance from your products.
If you run into technical difficulties, we’ll be here always for you. For
the most frequently asked questions, you can easily find solutions in
your product documentation. The guide is specified detailedly so
please refer to it first. Therefore, we suggest strongly that you can
read it before asking for a customer service over the phone. If you
still cannot find the answer, gather all questions you can think of and
have the product at hand before giving a call to your dealer. All
dealers of AAEON are well-trained and ready to provide you as
many supports as we can. Based on the customer service we’ve
encountered until now, most of problems are minor and able to be

Mini-PCI Ethernet Module PER-C10L
PER-C10L Quick Installation Guide 4
easily solved over the phone. In addition, free-charged technical
support is available from AAEON engineers in the office time. We
are always pleased to give advice regarding to any installation and
operation for AAEON products.

Mini-PCI Ethernet Module PER-C10L
PER-C10L QuickInstallationGuide5
Ordering Information
• TF-PER-C10L-A10
Mini-PCI 10/100Base-TX Ethernet Module w/ Realtek 8100C
• TF-PER-C10L-A10-01
Mini-PCI 10/100/1000Base-TX Ethernet Module w/ Realtek 8110S
• TF-PER-C10L-A10-02
Mini-PCI 10/100Base-TX Ethernet Module w/ Intel®82551QM
• TF-PER-C10L-A10-03
Mini-PCI 10/100/1000Base-TX Ethernet Module w/ Intel®82541GI
• TF-PER-C10L-A11
Mini-PCI 10/100-TX Ethernet Module w/ Realtek 8100C (low
profile pin header, 90D DIP Type)

Mini-PCI Ethernet Module PER-C10L
PER-C10L Quick Installation Guide 6
Packing List
• 1 TF-PER-C10L Mini-PCI Ethernet Module
• 1 LAN Cable
• 1 Quick Installation Guide
• 1 CD-ROM for QIG (in PDF format) and drivers

Mini-PCI Ethernet Module PER-C10L
PER-C10L QuickInstallationGuide7
Content
A Message to the Customer.............................................................2
Product Warranty..............................................................................3
Ordering Information.........................................................................5
Packing List ......................................................................................6
1.1 Feature .......................................................................................8
1.2 Specification................................................................................9
1.3 Location of Jumper and Connector ..........................................10
1.4 Mechanical Drawing ................................................................. 11
1.5 10/100Base-TX Ethernet Connector (CN1)..............................12
1.6 10/100/1000Base-TX Ethernet Connector (CN1).....................12
1.7 LED pin (CN2) ..........................................................................12

Mini-PCI Ethernet Module PER-C10L
PER-C10L Quick Installation Guide 8
1.1 Feature
• Mini-PCI Type III Interface
• Single 10/100Base-TX or 10/100/1000Base-TX Ethernet
Port
• Supports Wake-On-LAN Function

Mini-PCI Ethernet Module PER-C10L
PER-C10L QuickInstallationGuide9
1.2 Specification
• Chipset Intel®82551QM / Realtek
8100C For 10/100Base-TX
Intel®82541GI / Realtek 8110S
For 10/100/1000Base-TX
• Speed Supports 10Mbps / 100Mbps /
1000Mbps, Auto negotiation
• Function IEEE 802.3x compliant flow
control support, IEEE 802.1Q
Virtual LAN, supports
Wake-On-LAN function
• Power Management Supports ACPI, PCI power
Management
• Operating Temperature 32 ℉~140℉( 0℃~ 60℃)

Mini-PCI Ethernet Module PER-C10L
PER-C10L Quick Installation Guide 10
1.3 Location of Jumper and Connector
CN1
CN2
For Intel
CN1
CN2
For Realtek
CN1
CN2
For Realtek (CN DIP Type)

Mini-PCI Ethernet Module PER-C10L
PER-C10L QuickInstallationGuide11
1.4 Mechanical Drawing
0.00
0.00
48.45
36.47
53.63
50.95
59.75
For Intel
0.00
0.00
48.45
36.47
53.63
50.95
59.75
For Realtek
0.00
0
.00
48.32
50.95
59.75
36.42
51.29
For Realtek (CN DIP Type)

Mini-PCI Ethernet Module PER-C10L
PER-C10L Quick Installation Guide 12
1.5 10/100Base-TX Ethernet Connector (CN1)
Pin Signal Pin Signal
1 OMDI0+ 2 OMDI0-
3 OMDI1+ 4 OMDI1-
5 GND 6 GND
7 N.C. 8 N.C.
9 N.C. 10 N.C.
1.6 10/100/1000Base-TX Ethernet Connector (CN1)
Pin Signal Pin Signal
1 OMDI0+ 2 OMDI0+
3 OMDI1+ 4 OMDI1-
5 GND 6 GND
7 OMDI2+ 8 OMDI2-
9 OMDI3+ 10 OMDI3-
1.7 LED pin (CN2)
Pin Signal Pin Signal
1 Link / Active LED (+) 2 Link / Active LED (-)
3 Speed 100Base-TX LED (+) 4 Speed 100Base-TX LED (-)
5 Speed 1000Base-T LED (+) 6 Speed 1000Base-T LED (-)

Mini-PCI Ethernet Module PER-C10L
PER-C10L QuickInstallationGuide13
Below Table for China RoHS Requirements
产品中有毒有害物质或元素名称及含量
AAEON Main Board/ Daughter Board/ Backplane
有毒有害物质或元素
部件名称 铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(VI))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
印刷电路板
及其电子组件 ×○○○○○
外部信号
连接器及线材 ×○○○○○
O：表示该有毒有害物质在该部件所有均质材料中的含量均在
SJ/T 11363-2006 标准规定的限量要求以下。
X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出
SJ/T 11363-2006 标准规定的限量要求。
备注：此产品所标示之环保使用期限，系指在一般正常使用状况下。