ABB CP 600 Series User manual


Operating Instructions
CP600
Control Panels with
MicroBrowser
WinCE Edition, Version 6.0
CP620-WEB
CP630-WEB
CP635-WEB
CP650-WEB
CP660-WEB
CP675-WEB

Operating Instructions 1 CP600/Issue: 09.2011
Content
Before You Start ................................................................................................................2
Safety Notices...........................................................................................................................2
Markups ....................................................................................................................................2
License ...............................................................................................................................3
Abbreviations.....................................................................................................................4
Overview.............................................................................................................................5
First Steps..........................................................................................................................6
CoDeSys Visualizations....................................................................................................9
XML Configuration File....................................................................................................11
Keyboard Shortcuts.........................................................................................................20
Configuration of an AC500 visualization.......................................................................21
CoDeSys MicroBrowser FAQ..........................................................................................22

Operating Instructions 2 CP600/Issue: 09.2011
Before You Start
Safety Notices
DANGER!
Indicates an imminent risk. It will lead to death or serious injury if not avoided.
WARNING!
Indicates a possible risk. It may lead to death or serious injury if not avoided.
CAUTION!
Indicates a possible risk. It may lead to light or slight injury or material damage if not
avoided.
Markups
Enumeration.
Precondition for an operation instruction or a description.
Operation instruction with one step.
1. Operation instruction with several steps.
Result of an operation.
NOTE
Helpful information with background information or an emphasized notice.
TIP
Application tips or other useful information and suggestions.

Operating Instructions 3 CP600/Issue: 09.2011
License
The CP6xx-WEB Control Panels already contain the license for the MicroBrowser.
Java is a registered trademark of Sun Microsystems Inc.
Solaris is a registered trademark of Sun Microsystems Inc.
Windows NT/95/98/ME/2000/XP and WinCE are registered trade marks of Microsoft Inc.
Mac OS is a registered trademark of Apple Inc.
OS/2 is a registered trademark of IBM Inc.
Pentium is a registered trademark by Intel Inc.
SpiderControl is a registrated trademark by IniNet Solutions GmbH, Switzerland.
SpiderLink is the internal API name from IniNet Solutions GmbH, Switzerland.

Operating Instructions 4 CP600/Issue: 09.2011
Abbreviations
Abbreviation
Description
MMI
Man Machine Interface, e.g. a SpiderControl views displayed at a touch panel or browser.
View A view is what the user of a MMI sees at one moment inside a window or a browser. A
*.teq file implements a view.
*.teq
File extension for a SpiderControl view file generated by the SpiderControl EDITOR.
Painter
A painter is a graphic object, which is used by the SpiderControl EDITOR. This object is
programmed in Java. Several painters were packed into an applet which resides on an
embedded system.
Applet
A Java program, which can be launched in a browser from within a HTML page.
PPO
Stands for process point. A process point is a variable of the user application that should
be made visible towards the MMI.
Container
A container is a local variable, which has a scope within the actual applet/view. Containers
are used to exchange values between different painters in a view or between different
views of the same applet.

Operating Instructions 5 CP600/Issue: 09.2011
Overview
The CP600-WEB Control Panels of ABB provide an ideal solution to represent the CoDeSys in built vi-
sualization of PLCs on a brilliant touch screen.
The MicroBrowser of the CP600-WEB Control Panels reflects directly the variables and pictures created
in the CoDeSys visualization which are integrated and downloaded to the webserver of the PLC. No sep-
arate programming tool for the Control Panel is needed. The screens are programmed inside the PLC
programming tool CoDeSys and downloaded to the PLC webserver.
The startup procedure of the CP600-WEB panels is explained in chapter “First Steps”, page 6.
The CoDeSys visualization can access every variable of the PLC program without any synchronization
tool. The range of features reaches from normal buttons, meter instruments, trends and histograms, inte-
gration of graphic files, alarm handling, dynamic language change, user right management and program-
mability of objects up to excecution of special internal programs like changeover to another PLC, exit the
program or change passwords. To see all supported features by the MicroBrowser on the CP600-WEB
Control Panel refer to chapter “Supported Features”, page 9.
The combination of a CP600-WEB Control Panel and an AC500 PLC with integrated webserver linked
together via Ethernet gives an easy and professional graphical interface to the AC500 PLC. Depending
on the type of AC500 up to 12 CP600-WEB Control Panels can access the AC500 webserver at a time.
The built-in 2-port-Ethernet-switch of some CP600-WEB Control Panels makes an additional switch un-
necessary while programming and testing or connecting more than one Control Panel to the AC500.
A short introduction of how to configure the AC500 to create an accessible visualization via the webserver
is given in chapter “Configuration of an AC500 visualization”, page 21.

Operating Instructions 6 CP600/Issue: 09.2011
First Steps
Soft Input Panel (SIP)
Instead of connecting a keyboard via the USB port of the CP6xx-WEB Control Panel, a soft input panel
can be used.
1. To access the soft input panel click on the red pencil or grey keyboard symbol on the right corner of
the taskbar.
2. Select Keyboard to activate and Hide Input Panel to deactivate the keyboard.
3. Select LargeKB to activate a larger keyboard and Keyboard to return to the smaller keyboard.
Setup of the IP Address
If a fixed IP address is used instead of obtaining an IP address via DHCP.
1. Click on Windows Start.
2. Select Network and Dial-up Connections.
3. Double click on the Ethernet network symbol: ULTIEMAC1 or EMAC1.
4. Change the IP address of the CP6xx-WEB Control Panel by using the soft input panel or connected
USB-Keyboard.
5. IMPORTANT: To make this change permanent, exit the Network Connections and double click on
the icon Registry Save on the desktop.

Operating Instructions 7 CP600/Issue: 09.2011
Configuration Mode of MicroBrowser (Kiosk-Mode)
The MicroBrowser can run in “Kiosk-Mode” where the menu and the task bar will disappear.
1. To activate the Kiosk-Mode open My Device\Flash\MicroBrowser and double click on the icon
KioskMode.
2. To activate the menu and task bar double click the icon NoKioskMode.
Default is NoKiosk-Mode.
Autostart of MicroBrowser
1. To automatically start the MicroBrowser at startup of the Control Panel open
My Device\Flash\MicroBrowser and double click the icon Enable_Autostart.
2. To deactivate the autostart of the MicroBrowser double click the icon Disable_Autostart.
Start MicroBrowser
1. To start the MicroBrowser double click the icon MicroBrowser.
The dialog of the host or IP address appears.
2. Default remote address is http://192.168.0.10/webvisu.htm.
Change this IP address to the address of your remote web server (IP address of target PLC).
This address will be stored unless you change to Kiosk-Mode or NoKiosk-Mode like described
above.
3. To access the CoDeSys web server of AC500 type webvisu.htm in the field Path or full URL.
4. If you select the checkbox Always use these settings this configuration dialog will not appear any-
more, unless you change to Kiosk-Mode or NoKiosk-Mode like described above.

Operating Instructions 8 CP600/Issue: 09.2011
Exit MicroBrowser
If the MicroBrowser is not running in Kiosk-Mode use File\Exit from the menu bar.
If the MicroBrowser is running in Kiosk-Mode connect a USB-Keyboard and press <Shift> + <X>
In the CoDeSys visualization an exit button can be created. Choose the category Input.
Enable Execute program. Select (INTERN) EXITPROGRAM as configured program.
If Autostart is enabled and no keyboard is available:
1. Create a file autoexec.bat with the line del \Flash\autoexec.bat.
2. Copy this file to the root of an USB-Stick and insert it while the Control Panel is running.
3. Reboot the Control Panel. After the reboot the autostart is disabled.
Calibrate the Touch of the Display
1. Click on Windows Start.
2. Select Control Panel.
3. Double click on the symbol System Settings.
The system settings tool is a rotating menu through which you can scroll using the Next and Back
buttons.
4. Click on Next until Calibrate Touch appears in blue in the middle.
5. Double click it and follow the instructions.
6. Exit the rotating menu by pressing the cross in the upper right corner.
Update of the MicroBrowser
If a newer version of the MicroBrowser is available just replace the file
My Device\Flash\MicroBrowser\MicroBrowser_CE.exe with the new one copied on a USB-
Stick.
Be careful to select the right file for your Control Panel type.

Operating Instructions 9 CP600/Issue: 09.2011
CoDeSys Visualizations
Supported Features
The MicroBrowser supports visualizations designed with CoDeSys 2.x.
The following visualization elements are supported:
Rectangle
Ellipse
Polygon
Polyline
Curve
Bitmap
Visualization
Button
WMF file
Scrollbar
Meter
Bar display
Histogram
Alarm table
Trend
Line width: Variable for line width (dynamic change)
Input: Min/max
Special input possibilities
CHANGEUSERLEVEL
CHANGEPASSWORD
CONNECT_TO
EXITPROGRAM
These configuration possibilities are ONLY PARTLY supported:
Text variables (dynamic change)
Text flags
Font height
Font name
Font flags
These configuration possibilities are NOT supported:
Color variables (dynamic change): Frame flags
Variables: Tooltip-display
Text for Tooltip

Operating Instructions 10 CP600/Issue: 09.2011
These special input possibilities are NOT supported:
LANGUAGEDIALOG
DEFINERECEIPT
READRECEIPT
WRITERECEIPT
SAVEWATCH
LOADWATCH

Operating Instructions 11 CP600/Issue: 09.2011
XML Configuration File
It is essential that the MicroBrowser can write, open and modify this file on the local file system. The XML
file is called uBrowser.xml and is located in the installation directory of the MicroBrowser_CE.exe. The
file can be edited with any ASCII text editor. The contents of this file is as follows (contents may vary):
10
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
11
<uBrowser>
12
<!--Configuration file of the MicroBrowser-->
13
<version>130</version>
14
<start page>http://192.168.0.10/webvisu.html</start page>
15
<log file>uBrowser.log.txt</log file>
16
<proxy host></proxy host>
17
<proxy port>80</proxy port>
18
<vpi user></vpi user>
19
<vpi pass></vpi pass>
20
<reg code></reg code>
21
<prompt url>1</prompt url>
22
<full redraw>1</full redraw>
23
<debug level>1</debug level>
24
<kiosk>1</kiosk>
25
<keep alive>0</keep alive>
26
<httpd enabled>0</httpd enabled>
27
<httpd port>80</httpd port>
28
<sip>1</sip>
29
<img mem max>2097152l</img mem max>
30
<temp dir>\Temp\~mb~</temp dir>
31
<warn btn>1;0;!;1,1,23,23;255,128,64;0,0,0;</warn btn>
32
<remote mode>0</remote mode>
33
<teq cache>0</teq cache>
34
<loading msg>1;0;Loading...;0,0,0,0;0,0,0;0,0,0;</loading msg>
35
<show selection>0</show selection>
36
<config page></config page>
37
<config file></config file>
38
<httpd debug level>0</httpd debug level>
39
<boot delay sec>0</boot delay sec>
40
<set width>0</set width>
41
<set height>0</set height>
42
<inactivity to sec>0</inactivity to sec>
43
<inactivity pts ms>0</inactivity pts ms>

Operating Instructions 12 CP600/Issue: 09.2011
44
<tmz en>0</tmz en>
45
<mem ramdisk kb>0</mem ramdisk kb>
46
<mem heap1 kb>0</mem heap1 kb>
47
<mem heap2 kb>0</mem heap2 kb>
48
<mem heap3 kb>0</mem heap3 kb>
49
<mem lrheap kb>0</mem lrheap kb>
50
<mfc http en>1</mfc http en>
51
<mfc http cache>1</mfc http cache >
52
<http version>0</http version>
53
<shift hotkeys en>1</shift hotkeys en>
54
<perco file>uBrowsCo.xml</perco file>
55
<storage path></storage path>
56
<built in dialog>0</built in dialog>
57
<scale factor>1</scale factor>
58
<export en>1</export en>
59
<export path>C:\temp\Files</export path>
60
</uBrowser>
<version> Version
Version of the configuration file. DO NOT MODIFY IT!
<start_page> Start Page
Start URL, to open either a local file or remote file:
<start_page>Start.html</start_page> relative to the program path.
<start_page>http://192.168.1.10/Start.html</start_page>
Default is “webvisu.htm”.
<log_file> Log File
The MicroBrowser is able to create a log file for debug purposes. This file will increase, until it reaches
1 MB. It is cleared each time you restart the program. See also <debug_level>.
Default is “uBrowser.log.txt”.
<proxy_host>, <proxy_port> Proxy
Both tags may contain the respective information. Leave the <proxy_host> empty, since these properties
are not yet supported.
<vpi_user>, <vpi_pass> VPI
These properties are only needed, if you plan to access a target system over internet, using VPI-Portal.
These properties contain username and password for the portal. Please contact iniNet for details.
<prompt_url> Registration Code
The license key is already available in the CP6xx-WEB Control Panel. There is no need to enter a regis-
tration code.

Operating Instructions 13 CP600/Issue: 09.2011
<prompt_url> Prompt URL
If this property is set to 1, the MicroBrowser will open the URL dialog on startup. Set to 0, to force the Mi-
croBrowser to directly start the page defined in <start_page>. In this case, it will not open the dialog any-
more (same as choosing “Do not open…”).
See also shortcuts Alt-O to restore this option back.
Default is 1.
<full_redraw> Full Redraw
Sets the MicroBrowser to perform a full redraw for each update. If this property is set to 0, the Micro-
Browser will perform conditionnal redraws, meaning that only changing objects will be drawn. This option
improves the refresh of the MicroBrowser but requires that the HMI is well designed to support this option.
Also, you can change this option at runtime, for a specific view, by writing 0 (on gain focus event) and 1
(on lost focus event) onto the container variable “@MB_FULL_REDRAW”.
We suggest to leave the default option, i.e. 1.
<debug_level> Debug Level
Increasing the debug level will generate more information in the log file. 0 turns logging off, 1 is the de-
fault setting, 2 is the maximum.
<kiosk> Kiosk-Mode
Switches the MicroBrowser to the so-called Kiosk-Mode, where the menu bar will disappear. To hide the
task manager bar of WinCE, use the configuration dialog of the operating system: Right button click on
the task-bar, choose hide.
In this mode, a thin frame of 2 vertical and 5 horizontal pixels will remain. E.g. if you use a VGA resolu-
tion, choose a view size of 635 x 470 pixels to avoid scroll-bars.
0: Kiosk-Mode is disabled.
1: Kiosk-Mode with frame and task bar.
2: Kiosk-Mode without frame and task bar (full screen & always on top).
3 same as 2 but hot-keys like Shift-O, Shift-X, Alt-O, Alt-X, … are disabled.
4: The full screen is enabled but the view is not always on top.
5: This mode allows to start the MicroBrowser (XP only) by adjusting its window size with the size of
the applet-tag defined in the html file of the web project. See the project configuration dialog in editor.
Not full screen.
The Kiosk-Modes 0, 2, 3, 4 and 5 are implemented on MicroBrowser XP too.
<keep_alive> Keep Alive
Sets the options for HTTP 1.1 to keep a socket open. If ever possible, choose 0 to support HTTP 1.0 to
avoid trouble.
<httpd_enabled> HTTPD Enabled
If this tag is set to 1, the MicroBrowser will start a web server listening on the port specified by
<httpd_port>.
<httpd_port> HTTTPD Port
Port number of the enabled webserver. Should be “80”.
<httpd_debug_level> HTTPD Debug Level
Debug level for the webserver. 0 will turn logging off, 2 is the maximum. This option will help you to see
the incoming requests from any browser on the webserver. The output file is “eweb.log”.
Default is 0.

Operating Instructions 14 CP600/Issue: 09.2011
<sip> Soft Input Panel
SIP stands for Soft Input Panel and defines the way to edit any value on the SpiderControl MicroBrowser
under Windows CE.
Set to 0 to disable the Windows SIP and use instead of the keypad.teq and alphapad.teq in your web
project.
Set to 1 to enable the Windows SIP and automatically open the Windows SIP dialog (default).
Set to 2 to enable the Windows edit-box but without opening the SIP dialog. In the two latest cases, the
user may edit the value with a PS2 or USB keyboard. Default is 1.
Sets the SIP method:
0: Windows SIP is disabled, use keypad.teq and alphapad.teq.
1: Windows SIP is enabled, open the SIP on edit-box (*).
2: Windows edit-box is enabled, but do not open the SIP dialog.
3: Windows SIP is enabled in edit-box, like for SIP 1. And force the opening and closing of the SIP on
every Windows input dialog, like the configuration dialog.
<img_mem_max> Image memory max
Sets the maximum size in bytes used to cache image files in the MicroBrowser.
Default is 2 MB: “2097152”.
<temp_dir> Temporary Directory
Sets the temporary directory but also the prefix of temporary files. Should be /Temp/~mb~ or ~mb~. The
latest will create temporary files with prefix ~mb~ on relative path.
<warn_btn> Warning Button
Warning button: Configure the warning button in the following way:
1;time_in_sec;Label;x,y,width,height;bgndRed,bgndGreen, bgndBlue;
fgndRed,fgndGreen,fgndBlue;
Explanation:
1: The first option allows to enable=1 or disable=0 the button.
time_in_sec: Time in second to display the button. 0 means always on top.
Label: Text in button.
x,y,width,height: Allows to configure the position and the size of the button.
bgndRed,bgndGreen, bgndBlue; fgndRed,fgndGreen,fgndBlue : Allows to define the fore-
ground and background color in decimal RGB code.
Default: 1;0;!;1,1,23,23;255,128,64;0,0,0;
Example: 1;0;Warning!;1,1,80,30;255,128,64;0,0,0;

Operating Instructions 15 CP600/Issue: 09.2011
<remote_mode> Remote Mode
Sets the remote mode in this way:
0: Files and RPC are remote (default)
1: Local files with remote RPC
2: Local files with local PPO variables, but remote write.
Set this option to 1 in order to load HMI files from local file system (on MicroBrowser side) and only send
CGI requests on the target. The IP address and the path comes from the start page. For example, in the
URL: http://192.168.1.2/demo/start.html CGI requests: http://192.168.1.2/cgi-bin/…, and pathes for local
files are: .\demo\start.html, .\demo\*.teq, .\demo\*.gif, ….
<teq_cache> TEQ Cache
If this option is enabled, the MicroBrowser will perform the caching of TEQ files in Ramdisk. We suggest
to disable this option (= 0), and use the Windows cache, see <mfc_http_en> and <mfc_http_cache>. See
also <mem_ramdisk_kb> if the TEQ cache is enabled.
Default is 0 for Windows and 1 for other platforms.
<loading_msg> Loading Message
Configure the loading message displayed on TEQ jump.
1;Param;Text;x,y,width,height;bR,bG,bB; fR,fG,fB;
Explanation:
1: The first option allow to enable=1 or disable=0 this feature.
Param:
0: Text is centred using width and height of the TEQ file.
1: Text is centred using following parameters: x,y,width,height.
2: Text is the file name of the image to display on coordinates specified by following param.:
x,y,width,height.
bR,bG,bB: Background color (unused).
fR,fG,fB: RGB color of the text.
Default: 1;0;Loading...;0,0,0,0;0,0,0;0,0,0;
Example: 0;2;sanduhr.gif;4,412,20,20;0,0,0;0,0,0;
<show_selection> Show Selection
Sets the MicroBrowser to perform the drawing of the selected objects.
Default is 0.
<config_page> Configuration Page
Sets the MicroBrowser to open any configuration page before jumping on any URL. The MicroBrowser
will ignore the start page if any configuration page is defined and if <prompt_url> is set to 0. If the speci-
fied URL cannot be opened, it will return to the config page, to let the user change the URL, and it will try
again after a few seconds.
Default is empty.
Example: <config_page>MB_Config/MB_Config.html</config_page>. In this case, the Micro-
Browser expects that the configuration project is placed relative to the program path, in the subfolder
MB_Config and the file MB_Config.html. See also chapter “<config_file> Configuration File”.
<config_file> Configuration File
Define the configuration file used to store data from configuration project.

Operating Instructions 16 CP600/Issue: 09.2011
The default setting is empty, but the default file name is "MB_Config.ini". See also chap-
ter “<config_page> Configuration Page”.
Example:<config_file>MB_Config/MB_Config.ini</config_ file>
<boot_delay_sec> Boot Delay in Seconds
Sometimes, on reboot, the MicroBrowser needs to wait for the system to initialize all resources, like net-
work adapters. This option allows you to set the number of seconds to wait, at startup, before the Micro-
Browser tries to load the start page.
Default is 0 (disabled).
<set_width> Set Width
Set the width of the view. The default behavious of the MicroBrowser is that the view is automatically re-
sized to the size of the teq file, showing scrollbar if necessary. This property will force the width of the
view and ignore the width of the teq file.
Default is 0 (auto).
Example: 320 (pixels)
<set_height> Set Height
Set the height of the view. The default behavious of the MicroBrowser is that the view is automatically re-
sized to the size of the teq file, showing scrollbar if necessary. This property will force the height of the
view and ignore the height of the teq file.
Default is 0 (automatically).
Example: 240 (pixels)
<inactivity_to_sec> Inactivity Timeout in Seconds
Set the inactivity timeout in seconds used to substitute the refresh period. See Inactivity Poll Time Substi-
tute.
Default is 0 (disabled).
Example: 60 (seconds)
<inactivity_pts_ms> Inactivity, Poll Time Substitute in Milliseconds
Set the poll time of substitution in milliseconds, to use as soon as the timeout is reached. This feature is
usefull to reduce the traffic on the network. First the MicroBrowser starts with the refresh period defined in
the SpiderControl Editor project, can be fast. If no activity is detected after a time defined in „inactivi-
ty_to_sec“, the MicroBrowser will use the refresh period configured in <inactivity_pts_ms>. As soon as
the MicroBrowser detects any user activity again, it will restore the default refresh period from the project.
Default is 0 (disabled).
Example: 3000 (ms)
<tmz_en> Timezone Enabled
Set if time zone is enabled to display date and time for alarming and for offline trend. We suggest enabl-
ing TMZ, if the target supports time zone and generates UTC timestamp (i.e. the target is configured with
local date and time, and the time zone is correctly set, or if the target is configured with the time of
Greenwich and GMT+0). Thus the MicroBrowser will display dates and times depending on user local
time settings, defined on his computer. For example with GST (GMT+1), the date and time is displayed
with UTC time + 1 hour. In other case, if TMZ is disabled, the timestamp returned by the target will be
displayed as is, without any time zone or daylight convertion. This parameter is ignored for online trend,
since it always works with local time, and for SAIA alarming and offline trend, where time zone is not sup-
ported. The TMZ can be set dynamically, by writing 0 or 1 in the predefined container variable
“MB_tmz_en”.
Default is 0 (disabled).
Example: 1 (enabled)

Operating Instructions 17 CP600/Issue: 09.2011
<mem_ramdisk_kb> Memory RAM-Disk
Set memory size of RAM-Disk in kb. The RAM-Disk is used to create temporary files by the MicroBrowser
for FileViewer and DropDownList painters, to download files from remote web server, to let files in cache,
if <teq_cache> is enabled and also by the Web-Server if this latest is running. The ramdisk is cleared, on
every URL jump performed by the MicroBrowser. Set the debug level to 2, to see how much memory is
really used. Use this parameter with care!
Default is 0 (use the default ramdisk size of 1 MB).
Example: 1024 (kb)
<mem_heap1_kb> Memory Heap 1
Set memory size of heap 1 in kb. This memory is used to allocate painter objects of the current view and
to create the list of PPO. The heap memory is cleared, on every TEQ jump. Set the debug level to 2, to
see how much memory is really used. Use this parameter with care!
Default is 0 (use the default heap size of 2 MB)
Example: 2048 (kb)
<mem_heap2_kb> Memory Heap 2
Set memory size of heap 2 in kb. This memory is used for container variables, html tags from static HTML
and CSV files, for trending macro instances, and for log data in online trends,… The heap memory is
cleared, on every URL jump performed by the MicroBrowser. Set the debug level to 2, to see how much
memory is used. Use this parameter with care!
Default is 0 (use the default heap size of 2 MB).
Example: 2048 (kb)
<mem_heap3_kb> Memory Heap 3
Set memory size of heap 3 in kb. This memory is used to store the log data from HD-Log files and from
macro offline trends. The heap memory is cleared on URL jump or when the user press any Clear-Logs
button on one of these macro objects. Set the debug level to 2, to see how much memory is really used.
Use this parameter with care!
Default is 0 (use the default heap size of 1 MB).
Example: 1024 (kb)
<mem_lrheap_kb> Memory LR Heap
Set memory size of LR heap in kb. This memory is used to save HTML tags from dynamic CSV files. The
heap memory is cleared on every HTML jump and every time, the user loads a new language file. Set the
debug level to 2, to see how much memory is really used. Use this parameter with care!
Default is 0 (use the default heap size of 512 kb).
Example: 512 (kb)
<mfc_http_en> MFC HTTP
Set this option to 1, to use the Windows API to get files from the web server. Enabled, the MicroBrowser
will use the Windows cache, depending on the parameter below <mfc_http_cache>. Disabled, the Micro-
Browser will use the SpiderLink API to load files. And caching files depending on the parameter
<teq_cache>.
Default is 1 (enabled).
Example: 0 (disabled)
<mfc_http_cache> MFC HTTP Cache
This option works if parameter <mfc_http_en> is enabled. It allows to set options of the Windows cache.
Default is 1 (re-synchronize)

Operating Instructions 18 CP600/Issue: 09.2011
Options:
0: RELOAD: The caching is disabled, always reload the file.
1: RE-SYN.: Load the file from cache if it is not newer.
2: OFFLINE: Load the file from cache.
3: Use settings defined in Windows Internet Options (IE).
<http_version> HTTP Version
Set this option to 1, to use HTTP/1.1 on http requests performed by the SpiderLink (CGI or to get files if
<mfc_http_en> is disabled).
Default is 0 (HTTP/1.0).
<shift_hotkeys_en> Shift Hotkeys
Set this option to 1 to enable, or 0 to disable the Shift combinations hotkeys, like Shift-O, Shift-X, …
Therefore, default hotkeys like Alt-X and Alt-O still enabled even if the Shift combinations are disabled. To
disable all hotkeys (Shift- and Alt- combinations) use Kiosk-Mode 3.
Default is 1 (enabled).
Example: 0 (disabled).
<perco_file> PERCO File
Set path and file name of the perco file, where persitent container variables are saved (from
“MB_PERCO_0" to "MB_PERCO_19"). The default name is “uBrowsCo.xml” and the file is placed on the
program folder, but you can now specify an absolute path, like this:
Example: <perco_file>\FlashDrv\uBrowsCo.xml</perco_file>
<storage_path> Storage Path
Set the path where the MicroBrowser will save the trend and alarm log files. If the field is empty, the user
will be prompt to specify the folder and the file name with the standard save file dialog. Otherwise, the file
will automatically be saved, in the specified folder and based on the TEQ file name, like this:
<storage_path><teqFileName>_X.csv
where X is an integer value, incremented every time a new file is created, depending on the existing files
in the storage folder.
Default is empty.
Example: <storage_path>\FlashDrv\Log\</storage_path>
<built_in_dialog> Built-In Dialog
Set this option to 1 to enable, or 0 to disable the built-in dialog, to open trend and alarm log files. Default
is disabled, the standard Windows Open File dialog is used:

Operating Instructions 19 CP600/Issue: 09.2011
Enabled, the built-in "MBFileOpenDlg.teq" is used:
<scale_factor> Scale Factor
At the moment this is only active for CoDeSys HMI's and Kiosk-Mode <kiosk> = 2. This factor sets the
scaling of the whole HMI. Default is scaling factor 1, which means original size of the elements. A special
case is introduced with scale_factor = 0. In this case, the MicroBrowser will scale the HMI due to the
physical screen dimensions, so that the view size given by CoDeSys is streched or shrunk to meet the
physical screen dimensions.
<export_en> Export Enable
When this flag is set to 1, the MicroBrowser will export all the views that are visualized to the local storage
system and path given by the parameter <export_path>. This feature can also be used to translate a
CoDeSys HMI into a SpiderControl HMI. In that case both, the .xml and .teq files, are being generated
and stored on the local storage system.
<export_path> Export Path
This is the path to which the files are exported, when the export setting is enabled
<export_en>1</export_en>.