ABB CP 600 Series User manual

2 CP620, CP630, CP635, CP651, CP661, CP665, CP676
Content
Introduction........................................................................................................................3
Before You Start ................................................................................................................4
Safety Notices............................................................................................................................. 4
Markups....................................................................................................................................... 4
Product Overview ..............................................................................................................5 
Standards and Approvals .................................................................................................6
Product Identification ................................................................................................................ 6
Technical Specifications ........................................................................................................... 7
Environmental Conditions......................................................................................................... 7
CP635-Fx:................................................................................................................................ 8
Electromagnetic Compatibility (EMC) ...................................................................................... 9
Durability Information.............................................................................................................. 10
Technical Data .................................................................................................................11
Dimensions............................................................................................................................... 15
Installation Environment ......................................................................................................... 16
Applying the Gasket............................................................................................................... 16
Installation Procedure.............................................................................................................. 17
Connections.....................................................................................................................19
Serial Port ................................................................................................................................. 20
Ethernet Port............................................................................................................................. 20
Power Supply, Grounding and Shielding ......................................................................21
Battery ..............................................................................................................................22
Cleaning Faceplates........................................................................................................23
Getting Started.................................................................................................................24
System Settings...............................................................................................................25
Dedicated LED Indicators ...............................................................................................27
Unpacking and Packing Instructions.............................................................................28

3 CP620, CP630, CP635, CP651, CP661, CP665, CP676
Introduction
The operational guidelines described below is information which relates to the device, place of employ-
ment, transportation, storage, assembly, use and maintenance.
This Operating Instruction describes the main features of the CP600 Control Panels. The Operating In-
structions refers to the following models:
Picture Type Description
CP620-x, CP620-x-WEB Control panel with TFT color 4.3” widescreen
display touchscreen
CP630-x, CP630-x-WEB Control panel with TFT color 5.7” display
touchscreen
CP635-x, CP635-x-WEB Control panel with TFT color 7” widescreen
display touchscreen
CP635-Fx Control panel with TFT color 7” widescreen
display touchscreen
CP651-x, CP651-x-WEB Control panel with TFT color 10.4” display
touchscreen
CP661-x, CP661-x-WEB Control panel with TFT color 12.1” display
touchscreen
CP665-x, CP665-x-WEB Control panel with TFT color 13.3” widescreen
display touchscreen
CP676-x, CP676-x-WEB Control panel with TFT color 15” display
touchscreen

4 CP620, CP630, CP635, CP651, CP661, CP665, CP676
Before You Start
Safety Notices
DANGER!
Indicates an imminent risk. It will lead to death or serious injury if not avoided.
WARNING!
Indicates a possible risk. It may lead to death or serious injury if not avoided.
CAUTION!
Indicates a possible risk. It may lead to light or slight injury or material damage if not avoid-
ed.
Markups
Enumeration.
Precondition for an operation instruction or a description.
Operation instruction with one step.
1. Operation instruction with several steps.
Result of an operation.
NOTE
Helpful information with background information or an emphasized notice.
TIP
Application tips or other useful information and suggestions.

5 CP620, CP630, CP635, CP651, CP661, CP665, CP676
Product Overview
The Control Panels combine state-of-the-art features and top performance with an outstanding design.
They are the ideal choice for all demanding HMI applications including factory and building automation.
These Control Panels have been designed to run the PB610 Panel Builder 600 software.
PB610 Panel Builder 600 Runtime included. Full compatibility with PB610 Panel Builder 600.
Full vector graphic support. Native support of SVG graphic objects. Transparency and alpha blend-
ing.
Full object dynamics: Control visibility and transparency, move, resize, rotate any object on screen.
Change properties of basic and complex objects.
TrueType fonts.
Multilanguage applications. Easily create and manage your applications in multiple languages to
meet global requirements. Far East languages are supported. Tools available in PB610 Panel Builder
600 support easy third-party translations and help reducing development and maintenance costs of
the application.
Data display in numerical, text, bargraph, analog gauges and graphic image formats.
Rich set of state-of-the-art HMI features: Data acquisition, alarm handling, scheduler and timed ac-
tions (daily and weekly schedulers, exception dates), recipes, users and passwords, e-mail and RSS
feeds, rotating menus.
Includes support for a set of communication drivers.
Multiple drivers communication capability.
Remote monitoring and control. Client-Server functionality.
Offline and online Simulation with PB610 Panel Builder 600.
Powerful scripting language for automating HMI applications. Script debugging improves efficiency in
application development.
Rich gallery of vector symbols and objects.
Project templates.

6 CP620, CP630, CP635, CP651, CP661, CP665, CP676
Standards and Approvals
The Control Panels have been designed for installation and use in an industrial environment in compli-
ance with the 2004/108/EC EMC Directive.
The products have been designed in compliance with:
EN 61000-6-4:2007+A1:2011 EN 55011 Class A
EN 61000-6-2:2005 EN 61000-4-2
EN 61000-4-3
EN 61000-4-4
EN 61000-4-5
EN 61000-4-6
The installation of these devices into the residential, commercial and light-industrial environments is al-
lowed only in the case that special measures are taken in order to get ensure conformity
to EN 61000-6-3.
The products are in compliance with the Restrictions on Certain Hazardous Substances (RoHS) Directive
2011/65/EU. In compliance with the above regulations the products are CE marked.
NOTE
If the mounting surface is not plane and robust enough, the degree IP69K is not guaranteed.
A special mounting flange is included to provide the necessary support.
Product Identification
The Control Panel products are identified by a product label. The label reports several information, includ-
ing the model name, the part number, the power supply, the date of production (in the following format:
ywwy) and two barcodes. The first code is the version code, the second one the serial number (S.N.).
Example of product label
Information on type plate (example) Description
CP620 Product type
1SAP520200R0001 Product part number
1231 ywwy – week and year of production
09994971497 Serial number
040100A01000140 Version number of the product
WEB 1.5.15.117 Version number of the MicroBrowser
(only valid for CP6xx-x-WEB)

7 CP620, CP630, CP635, CP651, CP661, CP665, CP676
Technical Specifications
Parameter Value
Touchscreen technology Resistive
Back-up battery 3V 50mAh Lithium, rechargeable, not user-replaceable, model VL2330
Fuse Automatic
Serial Port RS-232, RS-485, RS-422 software configurable
User memory Flash 128 MB for CP620, CP630, CP635 including –x, -x-WEB
Flash 256 MB for CP635-Fx,
Flash 256 MB for CP651, CP661, CP665, CP676 including –x, -x-WEB
Recipe memory Flash
Hardware clock Clock/calendar with back-up battery
Accuracy RTC
(at 25 °C operating)
< 100 ppm
Environmental Conditions
Parameter Value According to
Operating temperature
(surrounding air temperature)
0 °C … +50 °C
for CP635-Fx: -20 °C … +60 °C
EN 60068-2-14
Storage temperature -20 °C … +70 °C
for CP635-Fx: -40 °C … +85 °C
EN 60068-2-14
Operating and storage humidity 5 % … 85 % RH not-condensing EN 60068-2-30
Vibrations 5 Hz … 9 Hz, 7 mm p-p
9 Hz … 150 Hz, 1 g
EN 60068-2-6
Shock ± 50 g, 11 ms, 3 pulses per axis EN 60068-2-27
Protection class IP66 front panel *
for CP635-Fx: IP69K
EN 60529
*) The front face of the Control Panel unit, installed in a solid panel, has been tested using conditions
equivalent to the standards shown in the ”Environmental Conditions”. Even though the CP600 unit’s level
of resistance is equivalent to these standards, oils that should have no effect on the control panel can
possibly harm the unit. This can occur in areas where either vaporized oils are present, or where low vis-
cosity cutting oil are allowed to adhere to the unit for long periods of time. If the control panel’s front face
protection sheet becomes peeled off, these conditions can lead to the ingress of oil into the control panel
and separate protection measures are suggested.
If the installation gasket is used for a long period of time, or if the unit and its gasket are removed from the
panel, the original level of the protection cannot be guaranteed.

8 CP620, CP630, CP635, CP651, CP661, CP665, CP676
CP635-Fx:
Main Features
Stainless steel bezel 316/1.440l
Food-compatible gasket
Food standard sealing compliant with FDA 21 CFR 177.2006
PCAP touchscreen, can be operated with gloves for food areas
Designated according to DIN EN 1672-2
Designated according to the EHEDG Guideline
Chemical Resistance
Protective front foils are made with high-quality polyester. Polyester withstands exposure of more than
24 h duration under DIN 42 115 Part 2 to wide range of chemicals without visible change.
Sodium hydroxide 50 %
Ammonia < 32 %
Sulphuric acid 30 %
Acetic acid < 50 %
IP69K standard
Water temperature 80 °C (176 °F)
Pressure 8 … 10 MPa (80 … 100 bar) (1160 … 1450 psi)
Flow rate 14 … 16 l/m (3.7 … 4 gal/m)
Nozzle distance 10 … 15 cm (4 … 6 inch)
Angles 0° 30° 60° 90°
Timing 30 s/each angle

9 CP620, CP630, CP635, CP651, CP661, CP665, CP676
Electromagnetic Compatibility (EMC)
Test executed on the 230 V AC side of the Power Supply (EN 61000-4-11).
Parameter Value According to
Radiated disturbance test Class A EN 55011
Electrostatic discharge im-
munity test
8 kV (air electrostatic discharge)
4 kV (contact electrostatic discharge)
EN 61000-4-2
Radiated, radio-frequency,
electromagnetic field immuni-
ty test
80 MHz … 1 GHz, 10 V/m
1.4 GHz … 2 GHz, 3 V/m
2 GHz … 2.7 GHz, 1 V/m
EN 61000-4-3
Burst immunity test ± 2 kV DC power port
± 1 kV signal line
EN 61000-4-4
Surge immunity test ± 0.5 kV DC power port (line to earth)
± 0.5 kV DC power port (line to line)
± 1 kV signal line (line to earth)
EN 61000-4-5
Immunity to conducted dis-
turbances inducted by radio-
frequency field
0.15 … 80 MHz, 10 V EN 61000-4-6
Voltage dips, short interrup-
tions and voltage variations
immunity test
Port: AC mains. Level:
100 % / duration: 1 cycle and 250 cycles (50 Hz);
40 % / duration: 10 cycles (50 Hz);
70 % / duration: 25 cycles (50 Hz);
Phase: 0°-180°

10 CP620, CP630, CP635, CP651, CP661, CP665, CP676
Durability Information
Parameter Value of CP600 Value of CP635-Fx
Backlight service life
(LED type)
MTBF value: 40,000 h
(time of continuous operation until the brightness of the backlight reaches
50 % of the rated value when the surrounding temperature reach 25 °C),
see1
Battery lifetime 10 years if the surrounding temperature is 25 °C
5 years if the surrounding temperature is 40 °C
Front foil (without directly
expose to sunlight or UV ray)
10 years if the surrounding temperature is 25 °C
UV Resistance Indoor applications: After 300 h cycled humidity in QUV accelerated
weathering, some yellowing and brittleness may be present.
Touch panel
(resistive film, analog)
1,000,000 or more of activations,
see2
Not applicable
(capacitive touchscreen with no
mechanical stress), see3
Touchscreen reliability > 1 million operations Not applicable
(capacitive touchscreen with no
mechanical stress)
1Extended use in environments where the surrounding air temperature is 40 °C or higher may degrade
backlight quality/reliability/durability.
2Solvent resistance:
Contact for ½ hour at 21 °C, no visible effect: Acetone, Butyl Cellosolve, Cyclohexanone, Ethyl Acetate,
Hexane, Isopropyl Alcohol, MEK, Methylene Chloride, Toluene, Xylene
Contact for 24 hours at 49 °C, no visible effect: Coffee, Ketchup, Lemon Juice, Mustard (slight yellow stain),
Tea, Tomato Juice.
3Solvent resistance:
Contact of more than 24 hours, no visible effect: Acetone, Acetic acid <50%, Ammonia <32%, Hydrochloric
acid <10%, Hydrogen peroxide <25%, Potassium Hydroxide (Caustic Potash) <2%, Sodium hydroxide 50%,
Sodium hypochlorite <20%, Sulphuric Acid 30%, Toluene

11 CP620, CP630, CP635, CP651, CP661, CP665, CP676
Technical Data
Model CP620-x (-WEB) CP630-x (-WEB)
Display/Backlight TFT Color / LED TFT Color / LED
Colors 64 K 64 K
Resolution 480 x 272 320 x 240
Diagonal (inches) 4.3” 5.7“
Dimming Yes Yes
Touchscreen Yes Yes
User memory flash 128 MB 128 MB
SC card slot Yes Yes
Recipe memory Yes. Flash memory storage limited
only by available memory
Yes. Flash memory storage limited
only by available memory
Serial Port RS-232, RS-485, RS 422, DB9
female, software configurable
RS-232, RS-485, RS 422, DB9
female, software configurable
Ethernet port 2 x 10/100 Mbit/s with integrated
switch
2 x 10/100 Mbit/s with integrated
switch
USB port 1 x host interface, version 2.0 and
1.1
2 x host interface,
1 version 2.0 and 1.1,
1 version 2.0
Expansion slot for future
optional plugin modules
1 x 2 x
Battery Rechargeable Rechargeable
Real-time clock Yes Yes
Voltage 18 … 32 V DC *) 18 … 32 V DC *)
Current rating (at 24 V DC) 0.4 A 0.65 A
Weight 1 kg 1 kg
*) For applications not requiring compliance with EN 61131-2 and specifically in reference to 10 ms voltage
dips, the minimum power supply voltage is 10 V DC.

12 CP620, CP630, CP635, CP651, CP661, CP665, CP676
Model CP635-Fx CP635-x (-WEB)
Display/Backlight TFT Color / LED TFT Color / LED
Colors 64 K 64 K
Resolution 800 x 480 800 x 480
Diagonal (inches) 7“ widescreen 7“ widescreen
Dimming Yes Yes
Touchscreen Yes Yes
User memory flash 256 MB 128 MB
SC card slot Yes Yes
Recipe memory Yes. Flash memory storage limited
only by available memory
Yes. Flash memory storage limited
only by available memory
Serial Port RS-232, RS-485, RS 422, DB9
female, software configurable
RS-232, RS-485, RS 422, DB9
female, software configurable
Ethernet port 2 x 10/100 Mbit/s with integrated
switch
2 x 10/100 Mbit/s with integrated
switch
USB port 2 x host interface,
1 version 2.0 and 1.1,
1 version 2.0
2 x host interface,
1 version 2.0 and 1.1,
1 version 2.0
Expansion slot for future
optional plugin modules
- 2 x
Battery Rechargeable Rechargeable
Real-time clock Yes Yes
Voltage 18 … 32 V DC *) 18 … 32 V DC *)
Current rating (at 24 V DC) 0.9 A 0.7 A
Weight 1.5 kg 1 kg
*) For applications not requiring compliance with EN 61131-2 and specifically in reference to 10 ms voltage
dips, the minimum power supply voltage is 10 V DC.

13 CP620, CP630, CP635, CP651, CP661, CP665, CP676
Model CP651-x(-WEB) CP661-x(-WEB)
Display/Backlight TFT Color / LED TFT Color / LED
Colors 64 K 64 K
Resolution 800 x 600 800 x 600
Diagonal (inches) 10.4” 12.1“
Dimming Yes Yes
Touchscreen Yes Yes
User memory flash 256 MB 256 MB
SC card slot Yes Yes
Recipe memory Yes. Flash memory storage limited
only by available memory
Yes. Flash memory storage limited
only by available memory
Serial Port RS-232, RS-485, RS-422, DB9
female, software configurable
RS-232, RS-485, RS-422, DB9
female, software configurable
Ethernet port 2 x 10/100 Mbit/s
with integrated switch
2 x 10/100 Mbit/s
with integrated switch
USB port 2 x host interface,
1 version 2.0 and 1.1,
1 version 2.0
2 x host interface,
1 version 2.0 and 1.1,
1 version 2.0
Expansion slot for future
optional plugin modules
2 x 2 x
Battery Rechargeable Rechargeable
Real-time clock Yes Yes
Voltage 18 … 32 V DC *) 18 … 32 V DC *)
Current rating (at 24 V DC) 1 A 1.2 A
Weight 2.1 kg 2.8 kg
*) For applications not requiring compliance with EN 61131-2 and specifically in reference to 10 ms voltage
dips, the minimum power supply voltage is 10 V DC.

14 CP620, CP630, CP635, CP651, CP661, CP665, CP676
Model CP665-x(-WEB) CP676-x(-WEB)
Display/Backlight TFT Color / LED TFT Color / LED
Colors 64 K 64 K
Resolution 1280 x 800 1024 x 768
Diagonal (inches) 13.3” 15“
Dimming Yes Yes
Touchscreen Yes Yes
User memory flash 256 MB 256 MB
SC card slot Yes Yes
Recipe memory Yes. Flash memory storage limited
only by available memory
Yes. Flash memory storage limited
only by available memory
Serial Port RS-232, RS-485, RS-422, DB9
female, software configurable
RS-232, RS-485, RS-422, DB9
female, software configurable
Ethernet port 2 x 10/100 Mbit/s
with integrated switch
2 x 10/100 Mbit/s
with integrated switch
USB port 2 x host interface,
1 version 2.0 and 1.1,
1 version 2.0
2 x host interface,
1 version 2.0 and 1.1,
1 version 2.0
Expansion slot for future
optional plugin modules
2 x 2 x
Battery Rechargeable Rechargeable
Real-time clock Yes Yes
Voltage 18 … 32 V DC *) 18 … 32 V DC *)
Current rating (at 24 V DC) 1.2 A 1.4 A
Weight 2.8 kg 3.5 kg
*) For applications not requiring compliance with EN 61131-2 and specifically in reference to 10 ms voltage
dips, the minimum power supply voltage is 10 V DC.

15 CP620, CP630, CP635, CP651, CP661, CP665, CP676
Dimensions
CP620 CP630, CP635, CP651, CP661, CP665, CP676
including –x(-WEB) including –x(-WEB), CP635-Fx
Model A B C H L F
mm inches mm inches mm inches mm inches mm inches mm inches
CP620-x(-WEB) 136 5.35” 96 3.78” 52 2.05” 107 4.21” 147 5.78” 4 0.16”
CP630-x(-WEB) 176 6.93” 136 5.35” 47 1.85” 147 5.79” 187 7.36” 4 0.16”
CP635-x(-WEB) 176 6.93” 136 5.35” 47 1.85” 147 5.79” 187 7.36” 4 0.16”
CP635-Fx 176 6.93” 136 5.35” 44 1.73” 177 6.96” 217 8.54” 4 0.16”
CP651-x(-WEB) 276 10.87” 221 8.70” 56 2.20” 232 9,13” 287 11.30” 4 0.16”
CP661-x(-WEB) 326 12.83” 256 10.08” 56 2.20” 267 10.51” 336 13.23” 4 0.16”
CP665-x(-WEB) 326 12.83” 256 10.08” 56 2.20” 267 10.51” 336 13.23” 4 0.16”
CP676-x(-WEB) 381 15.00” 296 11.65” 60 2.36” 307 12.09” 392 15.43” 4 0.16”
Model CSD: Minimum compass safe distance of
standard compass CSD2: Minimum compass safe distance of steering compass, standby steering
compass and emergency compass
mm inches mm inches
CP620-x(-WEB) 350 13.78” 200 7.87”
CP630-x(-WEB) 350 13.78” 200 7.87”
CP635-x(-WEB) 450 17.72” 250 9.84”
CP635-Fx N.A. N.A. N.A. N.A.
CP651-x(-WEB) 600 23.62” 400 15.75”
CP661-x(-WEB) 250 9.84” 150 5.91”
CP665-x(-WEB) 500 19.69” 150 5.91”
CP676-x(-WEB) 550 21.65” 300 11.81”

16 CP620, CP630, CP635, CP651, CP661, CP665, CP676
Installation Environment
The equipment is not intended for continuous exposure to direct sunlight. This might accelerate the aging
process of the front panel film.
The equipment is not intended for installation in contact with corrosive chemical compounds. Check the
resistance of the front panel film to a specific compound before installation.
Do not use tools of any kind (screwdrivers etc.) to operate the touchscreen of the panel.
In order to meet the front panel protection classifications, proper installation procedure must be followed:
The borders of the cutout must be flat.
The cutout for the panel must be of the dimensions indicated in this manual.
Screw up each fixing screw until the plastic bezel corner get in contact with the panel.
The IP66 is guaranteed only if:
Maximum deviation from the plane surface to the cut-out: 0.5 mm
Thickness of the plate the equipment is mounted: 1.5 mm to 6 mm
Maximum surface roughness where the gasket is applied: 120 µm
Applying the Gasket
Apply the gasket on the rear of the frame.
NOTE
If the mounting surface is not plane and robust enough, the degree IP69K is not guaranteed.
A special mounting flange is included to provide the necessary support.
CP620, CP630, CP635 CP650, CP661, CP665, CP676
including –x(-WEB) versions including –x(-WEB) versions
A Gasket B Installation cut-out

17 CP620, CP630, CP635, CP651, CP661, CP665, CP676
Installation Procedure
Place the fixing brackets.
CAUTION!
Screw each fixing screw until the bezel corner gets in contact with the panel.

18 CP620, CP630, CP635, CP651, CP661, CP665, CP676
Communication Cables
The communication cable must be chosen for the type of device being connected.
Connection to an AC-500 with the TK681 CP600-AC500 RS232 communication cable
Connection to an AC-500(-eCo) with the TK682 CP600-AC500-eCo RS485 communication cable
*) all resistors: 0.25 W
1 Shield 2 SubD9 male

19 CP620, CP630, CP635, CP651, CP661, CP665, CP676
Connections
1 Serial port 3 USB port 5 Expansion slot for plugin module
2 2x Ethernet port 4 Power supply connector 6 SD card slot
1 Serial port 3 2x USB port 5 2x Expansion slot for plugin modules
2 2x Ethernet port 4 Power supply connector 6 SD card slot

20 CP620, CP630, CP635, CP651, CP661, CP665, CP676
Serial Port
The serial port is used to communicate with the PLC or with another type of controller.
Different electrical standards are available for the signals in the PLC port connector: RS-232, RS-422,
RS-485.
NOTE
It is always necessary to use the correct cable type to connect on the PLC.
If the proper cable is not used, communication with the PLC will not be possible.
The serial port is software programmable. Make sure you select the appropriate interface in the pro-
gramming software.
Serial port.
RS-232 RS-422, RS-485
Pin Description Pin Description
1 GND 1 GND
2 2
3 TX 3 CHA-
4 RX 4 CHB-
5 5
6 +5 V output 6 +5 V output
7 CTS 7 CHB+
8 RTS 8 CHA+
9 9
The communication cable must be chosen for the type of device being connected.
Ethernet Port
The Ethernet port has two status indicators.
Ethernet Port
A OFF: Valid link has not been detected
ON: Valid link has been detected
B ON: No activity
OFF: Activity