ACME CA-DD12 II User manual

DMX SPLITTER
CA-DD12 II
User Manual
Please read the instructions carefully before user

A
1
CA-DD12 II is a DMX signal distributor, It has 12 groups of DMX splitters. It’s
specially designed for connections of DMX receivers (Moving heads, color
changers, dimmers, etc.) in a daisy chain configuration. It has 3 2/9 6 outputs
and each output provides total electrical isolation. This greatly decreases
problems with ground loops. The electrical isolation of each output will
protect major lighting console not to be damaged from other equipment. It is
suitable to the application that DMX 512 signal have been weakened because
of long distance transmission. It will efficiently buffer and magnify the DMX
signal that makes the DMX data transmission more accurate and reliable.
1. Features
󲐀Fully controlled by DMX-512 (1990)
󲐀Buffer, magnify, distribute DMX signal effectively
󲐀12 groups of DMX splitters .1 DMX in, 1 DMX Through, 8 ways isolated DMX
splitter output for each group
󲐀Input/ Outputs 3-pin XLR
󲐀Outputs are electrical isolated from each other over 1000V
2. Front /Rear View

A
2
1 Floodlight Switch:Power On/Off the unit
2 Floodlight Switch:Power On/Off the fan
3Master switch:Power On/Off the unit
412 groups DMX splitters: Each group is independent of each other
5Mains supply: Connect to the power cord
6DMX splitters switch: Power On/Off the DMX splitters
7DMX In/Out: 1 DMX in, 1 DMX Through
8 DMX OUT: 8 way DMX output, every way electrical
isolation
3. Specifications
Power Supply: AC 100~ 240V 50/60Hz
Size: 600x630x890MM
Power consumption : 65W
Weight: 87KG

A
3
Innovation, Quality, Performance