ACME IU-01 User manual

1. Safety Instruction
WARNING
Please keep this User Guide for future consultation. If you sell the unit to
another user, be sure that they also receive this instruction booklet.
Unpack and check carefully that there is no transportation damage before
using the unit.
The unit is for indoor use only. Use only in a dry location.
In the event of serious operating problem, stop using the unit immediately.
The housing must be replaced if they are visibly damaged.
There are no user serviceable parts inside the unit. Do not open the housing
or attempt any repairs by yourself. In the unlikely event your unit may
require service, please contact your nearest dealer.
Product Items:
IU-01
1 x USB cable
1 x CD
Please read carefully the instruction, which includes important
information about the installation, usage and maintenance.
1B

2. Features
Dimension/Weight:
98 x 53 x 40mm，0.2kg
3.8"x2.1"x1.6"in, 0.44lbs
3. Connection
Connect as below to update program for
lightings:
4. Operation
4.1 Download ACME Upgrade setup software from our web site and install it.
A. Double-click setup file, click “Next” to confirm.
2B

B. Click “Browse” select path to store installation files, Click “Next” to
confirm.
C. Click “Next” to start install.
3B

D. Click “Close” to finish installation.
4.2 Update Program
A. Double- click the shortcut on the desktop
4B

Click “DMX Console” to export DMX signal. Click “Fixture Firmware
Upgrade” to update software for fixtures.
B. DMX signal output
Click “DMX Console”, the red signal indicator LED of IU-01 will be on and
pop-out the dialog box shown below
Total 512 channels DMX output, click “DMX Out” to start output, the
green signal indicator LED of IU-01 blinking, push to adjust the value.
5B

Click “Clean” to clean all settings. Click “Stand Alone” to stop, the green
signal indicator LED of IU-01 becomes off.
C. Update software
Click “DMX Console”, the red signal indicator LED of IU-01 will be on and
pop-out the dialog box shown below
Click “Open” to select a ACME software file that download from our web
site, push to set upgrade speed from 100 (fastest) to 1 (slowest). Click
“Upgrade” to upgrade software for lightings.
6B

Declaration of Conformity
We declare that our products (lighting equipments) comply with the
following specification and bears CE mark in accordance with the provision
of the Electromagnetic Compatibility (EMC) Directive 89/336/EEC.
EN55103-1: 2009 ; EN55103-2: 2009; EN62471: 2008;
EN61000-3-2: 2006 + A1:2009 + A2:2009; EN61000-3-3: 2008.
&
Harmonized Standard
EN 60598-1:2008 + All:2009; EN 60598-2-17:1989 + A2:1991;
EN 62471:2008; EN 62493: 2010
Safety of household and similar electrical appliances
Part 1: General requirements
Innovation, Quality, Performance