ADF Web AXIS HD67594-A1 User manual

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
Ether
N
et/IP /
PROFIBUS
Slave
Document code: MN67594_ENG Revision 1 002 Page 1 of 22
User Manual
Revision 1 002
English
EtherNet/IP / PROFIBUS Slave -
Converter
(Order Code: HD67594-A1)
for Website information:
http://www adfweb com/?Product=HD67594
for Price information:
http://www adfweb com/?Price=HD67594-A1
Benefits and Main Features:
Very easy to configure
Low cost
Industrial temperature range:
-40°C / +85°C (-40°F / +185°F)
For others PROFIBUS devices, see also the following links:
PROFIBUS Slave from/to
www adfweb com?Product=HD67045 ( Serial)
www adfweb com?Product=HD67053 ( M-Bus Master)
www adfweb com?Product=HD67551 ( CANopen)
www adfweb com?Product=HD67552 ( CAN)
www adfweb com?Product=HD67553 ( J1939)
www adfweb com?Product=HD67554 ( DeviceNet Slave)
www adfweb com?Product=HD67555 ( DeviceNet Master)
www adfweb com?Product=HD67561 ( Modbus Master)
www adfweb com?Product=HD67562 ( Modbus Slave)
www adfweb com?Product=HD67563 ( Ethernet Server)
www adfweb com?Product=HD67564 ( Modbus TCP Client)
www adfweb com?Product=HD67565 ( Modbus TCP Server)
PROFIBUS Master from/to
www adfweb com?Product=HD67577 ( DeviceNet Slave)
www adfweb com?Product=HD67575 ( Ethernet)
www adfweb com?Product=HD67577 ( CAN)
Do you have an your customer protocol?
See the following links:
www adfweb com?Product=HD67003
Do you need to choose a device? do you want help?
Ask it to the following link:
www adfweb com?Cmd=helpme
Axis Solutions Pvt Ltd is the Authorized Distributor of $')ZHE in India
www.axisindia.in | [email protected]
Axis Solutions Pvt Ltd is the Authorized Distributor of $')ZHE in India
www.axisindia.in | [email protected]
Axis Solutions Pvt Ltd is the Authorized Distributor of $')ZHE in India
www.axisindia.in | [email protected]
Axis Solutions Pvt Ltd is the Authorized Distributor of $')ZHE in India
www.axisindia.in | [email protected]

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
Ether
N
et/IP /
PROFIBUS
Slave
Document code: MN67594_ENG Revision 1 002 Page 2 of 22
INDEX:
Page
INDEX 2
UPDATED DOCUMENTATION 2
REVISION LIST 2
WARNING 2
TRADEMARKS 2
SECURITY ALERT 3
EXAMPLE OF CONNECTION 4
CONNECTION SCHEME 5
CHARACTERISTICS 6
CONFIGURATION 6
POWER SUPPLY 7
FUNCTION MODES 8
LEDS 9
PROFIBUS 10
ETHERNET 10
USE OF COMPOSITOR SW67594 11
NEW PROJECT / OPEN PROJECT 11
SET COMMUNICATION 12
UPDATE DEVICE 13
MECHANICAL DIMENSIONS 15
ORDER CODE 16
ACCESSORIES 16
PLC CONFIGURATION 17
DISCLAIMER 21
OTHER REGULATIONS AND STANDARDS 21
WARRANTIES AND TECHNICAL SUPPORT 22
RETURN POLICY 22
PRODUCTS AND RELATED DOCUMENTS 22
Pagina 2 di 22
UPDATED DOCUMENTATION:
Dear customer, we thank you for your attention and we remind you that
you need to check that the following document is:
Updated;
Related to the product you own
To obtain the most recently updated document, note the “document code”
that appears at the top right-hand corner of each page of this document
With this “Document Code” go to web page www adfweb com/download/
and search for the corresponding code on the page Click on the proper
“Document Code” and download the updates
To obtain the updated documentation for the product that you own, note
the “Document Code” (Abbreviated written "Doc Code" on the label on
the product) and download the updated from our web site
www adfweb com/download/
REVISION LIST:
Revision Date Author Chapter Description
1 000 22/05/2012 Fl All First release version
1 001 04/04/2013 Nt All Added new chapters
1 002 09/04/2013 Dp All Revision
WARNING:
ADFweb com reserves the right to change information in this manual
about our product without warning
ADFweb com is not responsible for any error this manual may contain
TRADEMARKS:
All trademarks mentioned in this document belong to their respective
owners

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
Ether
N
et/IP /
PROFIBUS
Slave
Document code: MN67594_ENG Revision 1 002 Page 3 of 22
SECURITY ALERT:
G ENERAL I NFORMATION
To ensure safe operation, the device must be operated according to the instructions in the manual When using the device are required for
each individual application, legal and safety regulation The same applies also when using accessories
I NTENDED U SE
Machines and systems must be designed so the faulty conditions do not lead to a dangerous situation for the operator (i e independent limit
switches, mechanical interlocks, etc )
Q UALIFIED P ERSONNEL
The device can be used only by qualified personnel, strictly in accordance with the specifications
Qualified personnel are persons who are familiar with the installation, assembly, commissioning and operation of this equipment and who
have appropriate qualifications for their job
R ESIDUAL R ISKS
The device is state of the art and is safe The instrument can represent a potential hazard if they are inappropriately installed and operated
by personnel untrained These instructions refer to residual risks with the following symbol:
This symbol indicates that non-observance of the safety instructions is danger for people to serious injury or death and / or the
possibility of damage
CE CONFORMITY
The declaration is made by us You can send an email to support@adfweb com or give us a call if you need it

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
Ether
N
et/IP /
PROFIBUS
Slave
Document code: MN67594_ENG Revision 1 002 Page 4 of 22
EXAMPLE OF CONNECTION:

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
Ether
N
et/IP /
PROFIBUS
Slave
Document code: MN67594_ENG Revision 1 002 Page 5 of 22
CONNECTION SCHEME:
Figure
1
: Connection scheme for HD67
594
-
A1

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
Ether
N
et/IP /
PROFIBUS
Slave
Document code: MN67594_ENG Revision 1 002 Page 6 of 22
CHARACTERISTICS:
The configurable “Ethernet/IP / PROFIBUS Slave - Converter” allows the following characteristics:
Triple isolation between Ethernet/IP/PROFIBUS, Ethernet/IP /Power Supply, PROFIBUS/Power Supply
Mountable on 35mm Rail DIN;
Power Supply 8 24V AC or 12 35V DC;
Temperature range -40°C to +85°C;
Up to 244 bytes from Ethernet/IP to PROFIBUS (IN);
Up to 244 bytes from PROFIBUS (OUT) to Ethernet/IP;
Ethernet switch for enter/exit connection
CONFIGURATION:
You need Compositor SW67594 software on your PC in order to perform the following:
Define the parameter of the PROFIBUS;
Define the parameter of the Ethernet/IP line

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
Ether
N
et/IP /
PROFIBUS
Slave
Document code: MN67594_ENG Revision 1 002 Page 7 of 22
POWER SUPPLY:
The devices can be powered between a wide range of tensions For more details see the two tables below
VAC
VDC
Vmin Vmax Vmin Vmax
HD67594-A1 8V 24V 12V 35V
Consumption at 24V DC:
Device W/VA
HD67594-A1 4
Caution: Not reverse the polarity power
HD67594-A1

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
Ether
N
et/IP /
PROFIBUS
Slave
Document code: MN67594_ENG Revision 1 002 Page 8 of 22
FUNCTION MODES:
The device has got two functions mode depending of the position of the Dip2 of ‘Dip-Switch B’:
The first, with Dip2 in Off position (factory setting), is used for the normal working of the device
The second, with Dip2 in On position, is used for upload the Project/Firmware
For the operations to follow for the updating (see ‘UPDATE DEVICE’ section)
According to the functioning mode, the LEDs will have specifics functions (see ‘LEDS’ section)

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
Ether
N
et/IP /
PROFIBUS
Slave
Document code: MN67594_ENG Revision 1 002 Page 9 of 22
LEDS:
The device has got six LEDs that are used to give information of the functioning status
The various meanings of the LEDs are described in the table below
LED Normal Mode Boot Mode
1: ON (green ON: Powered
OFF: Not powered
ON: Powered
OFF: Not powered
2: RUN (green) Blinks slowly (~1Hz) Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
3: PROFIBUS (green) Blink when the Master PROFIBUS communicate
with the Converter
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
4: Not Use (green) Not Used Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
5: Ethernet1 Tx (green) Blink when port Ethernet1 send some frames Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
6: Ethernet1 Tx (green) Blink when port Ethernet2 send some frames Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
Ether
N
et/IP /
PROFIBUS
Slave
Document code: MN67594_ENG Revision 1 002 Page 10 of 22
PROFIBUS:
The PROFIBUS uses a 9-pin D-SUB connector The pin assignment is defined
like in the right figure
Here some codes of cables:
Belden: p/n 183079A - Continuous Armor DataBus® ISA/SP-50
PROFIBUS Cable
ETHERNET:
The Ethernet connection must be made using Connector3 of HD67594-A1 with at least a Category 5E cable The maximum length of the
cable should not exceed 100m The cable has to conform to the T568 norms relative to connections in cat 5 up to 100 Mbps To connect the
device to an Hub/Switch is recommended the use of a straight cable, to connect the device to a PC/PLC/other is recommended the use of a
cross cable

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
Ether
N
et/IP /
PROFIBUS
Slave
Document code: MN67594_ENG Revision 1 002 Page 11 of 22
USE OF COMPOSITOR SW67594:
To configure the Converter, use the available software that runs with
Windows, called SW67594 It is downloadable on the site
www adfweb com and its operation is described in this document
(This manual is referenced to the last version of the software present
on our web site) The software works with MSWindows (MS 2000, XP,
Vista, Seven)
When launching the SW67580 the right window appears (Fig 2)
NEW PROJECT / OPEN PROJECT:
The “New Project” button creates the folder which contains the entire device configuration
A device configuration can also be imported or exported:
To clone the configurations of a Programmable “Ethernet/IP / PROFIBUS Slave - Converter”
in order to configure another device in the same manner, it is necessary to maintain the
folder and all its contents;
To clone a project in order to obtain a different version of the project, it is sufficient to
duplicate the project folder with another name and open the new folder with the button
“Open Project”
Figure 2: Main window for SW67594

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
Ether
N
et/IP /
PROFIBUS
Slave
Document code: MN67594_ENG Revision 1 002 Page 12 of 22
SET COMMUNICATION:
This section defines the fundamental communication parameter of two buses, PROFIBUS and Ethernet/IP
By pressing the “Set Communication” button from the main window for SW67594 (Fig 2) the window
“Set Communication” appears (Fig 3)
The window is divided in two sections, one for the PROFIBUS and the other for the Ethernet/IP
The means of the fields for “Ethernet/IP” are:
In the fields “IP Address” insert the IP address that you want to give to the Converter;
In the fields “SubNet Mask” insert the SubNet Mask;
In the fields “Gateway” insert the default gateway that you want to use This feature can be
enabled of disabled pressing the Check Box field;
In the field “Port” insert the number of port;
In the field "Number Byte Input" the number of byte from the Ethernet/IP to the Converter is
defined (at maximum it is possible to use 244 byte);
In the field "Number Byte Output" the number of byte from the Converter to the Ethernet/IP is
defined (at maximum it is possible to use 244 byte)
The means of the fields for “PROFIBUS” are:
In the field “ID Dev.” the address of the PROFIBUS side is defined;
In the field “Baud rate” the baud rate for the PROFIBUS side is defined;
Figure 3: “Set Communication” window

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
Ether
N
et/IP /
PROFIBUS
Slave
Document code: MN67594_ENG Revision 1 002 Page 13 of 22
UPDATE DEVICE:
By pressing the “Update Device” button it is possible to load the created Configuration into the
device; and also the Firmware, if is necessary
If you don’t know the actual IP address of the device you have to use this procedure:
Turn off the Device;
Put Dip2 of ‘Dip-Switch B’ at ON position;
Turn on the device
Connect the Ethernet cable;
Insert the IP “192.168.2.205”;
Press the “Ping” button, must appear “Device Found!”;
Press the “Next” button;
Select which operations you want to do;
Press the “Execute update firmware” button to start the upload;
When all the operations are “OK” turn off the Device;
Put Dip2 of ‘Dip-Switch B’ at OFF position;
Turn on the device
At this point the configuration/firmware on the device is correctly updated
Figure 4: “Update device” windows

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
Ether
N
et/IP /
PROFIBUS
Slave
Document code: MN67594_ENG Revision 1 002 Page 14 of 22
If you know the actual IP address of the device you have to use this procedure:
Turn on the Device with the Ethernet cable inserted;
Insert the actual IP of the Converter;
Press the “Ping” button, must appear “Device Found!”;
Press the “Next” button;
Select which operations you want to do;
Press the “Execute update firmware” button to start the upload;
When all the operations are “OK” the device automatically goes at
Normal Mode
At this point the configuration/firmware on the device is correctly update
Note:
When you install a new version of the software it is better if the first time you do the update of the Firmware in the HD67594-A1
device
Note:
When you receive the device, for the first time, you have to update also the Firmware in the HD67594-A1 device
Warning:
If the Fig 5 appears when you try to do the Update before require assistance try these points:
Try to repeat the operations for the updating;
Try with another PC;
Try to restart the PC;
If you are using the program inside a Virtual Machine, try to use in the main
Operating System;
If you are using Windows Seven or Vista, make sure that you have the
administrator privileges;
Take attention at Firewall lock;
Check the LAN settings
In the case of HD67594-A1 you have to use the software “SW67594”: www adfweb com\download\filefold\SW67594 zip
Figure 5: “ rotection” window

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
Ether
N
et/IP /
PROFIBUS
Slave
Document code: MN67594_ENG Revision 1 002 Page 15 of 22
MECHANICAL DIMENSIONS:
Figure
6
: Mechanical dimensions scheme
f
o
r
H
D
6
7
5
9
4
-
A
1

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
Ether
N
et/IP /
PROFIBUS
Slave
Document code: MN67594_ENG Revision 1 002 Page 16 of 22
ORDERING INFORMATIONS:
The ordering part number is formed by a valid combination of the following:
HD67594 – A 1
Connectors Type
1: Removable 5mm Screw Terminal
Enclosure Type
A: 1M, 35mm DIN Rail mounting
Device Family
HD67594: Ethernet/IP / PROFIBUS Slave - Converter
Order Code: HD670594-A1 - Ethernet/IP / PROFIBUS Slave - Converter
ACCESSORIES:
Order Code: AC34001 - Rail DIN - Power Supply 220/240V AC 50/60Hz – 12 V AC
Order Code: AC34002 - Rail DIN - Power Supply 110V AC 50/60Hz – 12 V AC

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
Ether
N
et/IP /
PROFIBUS
Slave
Document code: MN67594_ENG Revision 1 002 Page 17 of 22
PLC CONFIGURATION:
The configuration and commissioning of the EtherNet/IP Converter as described on the following pages was accomplished with the help of
the “RSLogix 5000” software of Rockwell Automation In case of using a control system from another supplier please attend to the
associated documentation
These are the steps to follow:
1) Create a "Generic Ethernet Module" under the Ethernet section in the I/O Configuration tree

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
Ether
N
et/IP /
PROFIBUS
Slave
Document code: MN67594_ENG Revision 1 002 Page 18 of 22
2) Edit the settings of the new Generic Ethernet Module As shown in the screen shot
below, the module was named “HD67594” and the IP-address assigned is 192 168 0 5
For the Comm Format “Data – SINT” shall be selected as the data type
The HD67594-A1 can uses up to 244 bytes for input assembly instance 101 and 244
bytes for output assembly instance 100
RSLogix 5000 requires a configuration assembly instance Both modules do not provide a
configuration assembly instance Therefore it is allowed to select an instance of 3 and to
set the value to zero
3) The setting of 10msec for the “Requested Packet Interval (RPI)” is adequate but it
is possible to change this value as required A lower value of 2ms shall not be selected
Warning:
The field “Use Unicast Connection over EtherNet/IP” must be checked

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
Ether
N
et/IP /
PROFIBUS
Slave
Document code: MN67594_ENG Revision 1 002 Page 19 of 22
4) After the configuration is completed, the controller tags are created

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
Ether
N
et/IP /
PROFIBUS
Slave
Document code: MN67594_ENG Revision 1 002 Page 20 of 22
5) With “RSLinks Classic Lite”, after have done a
network scan (RSWho), and finding the EtherNet/IP device,
it is possible to load the EDS file for the device in order to
have the “Module Info” compiled
Before
After