ADF Web HD67832-IP-B2 User manual

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
DALI /
BAC
net
M
aster
-
Converter
Document code: MN67832_ENG Revision 1 000 Pagina 1 di 42
User Manual
Revision 1 000
English
DALI / BACnet Master - Converter
(Order Code: HD67832-IP-B2, HD67832-MSTP-B2)
for Website information:
www adfweb com?Product=HD67832
for Price information:
www adfweb com?Price=HD67832-IP-B2
www adfweb com?Price=HD67832-MSTP-B2
Benefits and Main Features:
Very easy to configure
Electrical isolation
Temperature range: -40°C/85°C (-40°F/185°F)
For others DALI products, see also the following links:
Converter DALI to
www adfweb com?Product=HD67822 (KNX)
www adfweb com?Product=HD67831 (RS 85)
www adfweb com?Product=HD67833 (BACnet/IP Slave)
www adfweb com?Product=HD67834 (CAN)
www adfweb com?Product=HD67835 (CANopen)
www adfweb com?Product=HD67836 (DeviceNet Master)
www adfweb com?Product=HD67837 (DeviceNet Slave)
www adfweb com?Product=HD67838 (DMX)
www adfweb com?Product=HD67839 (Ethernet)
www adfweb com?Product=HD67840 (EtherNet/IP)
www adfweb com?Product=HD67842 (Modbus Master)
www adfweb com?Product=HD67843 (Modbus Slave)
www adfweb com?Product=HD67844 (Modbus TCP Master)
www adfweb com?Product=HD67845 (Modbus TCP Slave)
www adfweb com?Product=HD67848 (PROFINET)
www adfweb com?Product=HD67849 (SNMP Manager)
www adfweb com?Product=HD67850 (SNMP Agent)
Do you have an your customer protocol?
www adfweb com?Product=HD67003
Do you need to choose a device? do you want help?
www adfweb com?Cmd=helpme
User Manual

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
DALI /
BAC
net
M
aster
-
Converter
Document code: MN67832_ENG Revision 1 000 Pagina 2 di 42
INDEX:
Page
INDEX 2
UPDATED DOCUMENTATION 2
REVISION LIST 2
WARNING 2
TRADEMARKS 2
SECURITY ALERT 3
EXAMPLE OF CONNECTION 4
CONNECTION SCHEME 5
CHARACTERISTICS 7
CONFIGURATION 7
POWER SUPPLY 8
FUNCTION MODES 9
LEDS 10
DALI 11
RS485 (FOR BACNET MS/TP) 12
ETHERNET 13
USE OF COMPOSITOR SW67832 14
NEW PROJECT / OPEN PROJECT 15
SOFTWARE OPTIONS 16
SET COMMUNICATION 18
DALI ACCESS 20
BACNET SET ACCESS 23
UPDATE DEVICE 27
USE OF DALI CONSOLE SOFTWARE 29
STRUCTURE OF THE SOFTWARE 30
SETUP 31
SEARCH 32
TEST DALI 2 32
NETWORK SETTING 33
MECHANICAL DIMENSIONS 39
ORDERING INFORMATIONS 40
ACCESSORIES 40
DISCLAIMER 41
OTHER REGULATIONS AND STANDARDS 41
WARRANTIES AND TECHNICAL SUPPORT 42
RETURN POLICY 42
UPDATED DOCUMENTATION:
Dear customer, we thank you for your attention and we remind you that
you need to check that the following document is:
Updated
Related to the product you own
To obtain the most recently updated document, note the “document code”
that appears at the top right-hand corner of each page of this document
With this “Document Code” go to web page www adfweb com/download/
and search for the corresponding code on the page Click on the proper
“Document Code” and download the updates
REVISION LIST:
WARNING:
ADFweb com reserves the right to change information in this manual about
our product without warning
ADFweb com is not responsible for any error this manual may contain
TRADEMARKS:
All trademarks mentioned in this document belong to their respective
owners
Revision Date Author Chapter Description
1 000 03/04/2020 VDB All First Release

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
DALI /
BAC
net
M
aster
-
Converter
Document code: MN67832_ENG Revision 1 000 Pagina 3 di 42
SECURITY ALERT:
G ENERAL I NFORMATION
To ensure safe operation, the device must be operated according to the instructions in the manual When using the device, legal and
safety regulation are required for each individual application The same applies also when using accessories
I NTENDED U SE
Machines and systems must be designed so the faulty conditions do not lead to a dangerous situation for the operator (i e
independent limit switches, mechanical interlocks, etc )
Q UALIFIED P ERSONNEL
The device can be used only by qualified personnel, strictly in accordance with the specifications
Qualified personnel are persons who are familiar with the installation, assembly, commissioning and operation of this equipment and
who have appropriate qualifications for their job
R ESIDUAL R ISKS
The device is state-of-the-art and is safe The instruments can represent a potential hazard if they are inappropriately installed and
operated by untrained personnel These instructions refer to residual risks with the following symbol:
This symbol indicates that non-observance of the safety instructions is a danger for people that could lead to serious injury or
death and / or the possibility of damage
CE CONFORMITY
The declaration is made by our company You can send an email to support@adfweb com or give us a call if you need it

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
DALI /
BAC
net
M
aster
-
Converter
Document code: MN67832_ENG Revision 1 000 Pagina 4 di 42
EXAMPLE OF CONNECTION:

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
DALI /
BAC
net
M
aster
-
Converter
Document code: MN67832_ENG Revision 1 000 Pagina 5 di 42
CONNECTION SCHEME:
Figure 1a: Connection scheme for HD67832-I -B2

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
DALI /
BAC
net
M
aster
-
Converter
Document code: MN67832_ENG Revision 1 000 Pagina 6 di 42
Figure 1b: Connection scheme for HD67832-MST -B2

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
DALI /
BAC
net
M
aster
-
Converter
Document code: MN67832_ENG Revision 1 000 Pagina 7 di 42
CHARACTERISTICS:
The HD67832-xxx-B2 is a DALI / BACnet Master - Converter
It has the following characteristics:
Up to 64 devices on DALI bus;
Configurator for DALI network/devices;
Isolation between DALI – RS485, Power Supply – RS485 Additional isolation Power Supply – DALI for HD67832-xxx-B2 version;
Two-directional information between DALI bus and BACnet bus;
Mountable on 35mm Rail DIN;
Wide power supply input range: 8…24V AC or 12…35V DC;
Wide temperature range: -40°C / 85°C [-40°F / +185°F]
CONFIGURATION:
You need “DALI Console” software on your PC in order to perform the following:
Configure the DALI network;
Setup the DALI devices (groups, scenes, IDs, …);
Test DALI communication
You need Compositor SW67832-xxx-B2 software on your PC in order to perform the following:
Define the parameter of BACnet line;
Define the parameter of DALI line;
Update the device

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
DALI /
BAC
net
M
aster
-
Converter
Document code: MN67832_ENG Revision 1 000 Pagina 8 di 42
POWER SUPPLY:
The devices can be powered at 8…24V AC and 12…35V DC For more details see the two tables below
VAC
VDC
Vmin Vmax Vmin Vmax
8V 2 V 12V 35V
Consumption at 24V DC:
Device Consumption [W/VA]
HD67832-xxx-B2 3 5
HD67832-xxx-B2
Caution: Not reverse the polarity power

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
DALI /
BAC
net
M
aster
-
Converter
Document code: MN67832_ENG Revision 1 000 Pagina 9 di 42
FUNCTION MODES:
The device has got two functions mode depending of the position of the ‘Dip1 of Dip-Switch A’:
The first, with ‘Dip1 of Dip-Switch A’ at “OFF” position, is used for the normal working of the device
The second, with ‘Dip1 of Dip-Switch A’ at “ON” position, is used for upload the Project and/or Firmware
For the operations to follow for the updating, see ‘UPDATE DEVICE’ section
According to the functioning mode, the LEDs will have specifics functions, see ‘LEDS’ section

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
DALI /
BAC
net
M
aster
-
Converter
Document code: MN67832_ENG Revision 1 000 Pagina 10 di 42
LEDS:
The device has got five LEDs that are used to give information of the functioning status
The various meanings of the LEDs are described in the table below
LED Normal Mode Boot Mode
1: Device State (green) Blinks slowly (~1Hz) Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
2: DALI communication
(yellow) Blinks when DALI communication is running Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
3: BACnet communication
(yellow) Blinks when BACnet communication is running Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
4: Error State (yellow) ON: An error in the communication busses occurs
OFF: No errors are present
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
5: Link Ethernet (green) ON: Ethernet cable connected
OFF: Ethernet cable disconnected
ON: Ethernet cable connected
OFF: Ethernet cable disconnected

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
DALI /
BAC
net
M
aster
-
Converter
Document code: MN67832_ENG Revision 1 000 Pagina 11 di 42
DALI:
DALI stands for “Digital Addressable Lighting Interface” and it is an interface protocol for digital
communication between electronic lighting equipment (electronic ballasts, transformers, etc )
With the right choice of individual DALI components an extremely wide range of requirements can be met,
from operating the lighting system from a simple light switch to lighting management systems for entire
office complexes with thousands of light sources Using ADFweb com’s DALI converters, any light source,
including incandescent lamps, fluorescent lamps, high-intensity discharge lamps and even LEDs, can be
controlled irrespective of whether they are installed in an office, a restaurant or a street light
Characteristics Description
Medium Shielded Twisted Pair
Topology Linear, Star or mixed
Device power consumption Max 250 mA
DALI voltage 9 5 V – 22 5 V (typical 16 V)
Maximum cable length 300 m (1 5 mm2 wire)
Maximum number of DALI
devices 64
Baud rate 1200 bps
Maximum number of DALI
groups 16
Maximum number of DALI
scenes 16

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
DALI /
BAC
net
M
aster
-
Converter
Document code: MN67832_ENG Revision 1 000 Pagina 12 di 42
RS 85 (for BACnet MS/TP):
For terminate the RS485 line with a 120Ω resistor it is necessary to put ON dip 1, like in figure
The maximum length of the cable should be 1200m (4000 feet)
Here some codes of cables:
Belden: p/n 8132 - 2x 28AWG stranded twisted pairs conductor + foil shield + braid shield;
Belden p/n 82842 - 2x 24AWG stranded twisted pairs conductor + foil shield + braid shield;
Tasker: p/n C521 - 1x 24AWG twisted pair conductor + foil shield + braid shield;
Tasker: p/n C522 - 2x 24AWG twisted pairs conductor + foil shield + braid shield

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
DALI /
BAC
net
M
aster
-
Converter
Document code: MN67832_ENG Revision 1 000 Pagina 13 di 42
ETHERNET:
The Ethernet port is used for programming DALI network and for programming the device
The Ethernet connection must be made using Connector2 of HD67832-xxx-B2 with at least a Category 5E cable The maximum length of the
cable should not exceed 100m The cable has to conform to the T568 norms relative to connections in cat 5 up to 100 Mbps To connect the
device to an Hub/Switch is recommended the use of a straight cable, to connect the device to a PC is recommended the use of a cross cable

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
DALI /
BAC
net
M
aster
-
Converter
Document code: MN67832_ENG Revision 1 000 Pagina 14 di 42
USE OF COMPOSITOR SW67832:
To configure the Converter, use the available software that runs with Windows called SW67832 It is downloadable on the site
www adfweb com and its operation is described in this document (This manual is referenced to the last version of the software present on
our web site) The software works with MSWindows (XP, Vista, Seven, 8, 10; 32/64bit)
When launching the SW67832, the window below appears (Fig 2)
Note:
It is necessary to have installed Net Framework 4
Figure
2: Main window for SW678
32

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
DALI /
BAC
net
M
aster
-
Converter
Document code: MN67832_ENG Revision 1 000 Pagina 15 di 42
NEW CONFIGURATION / OPEN CONFIGURATION:
The “New Configuration” button creates the folder which contains the entire device’s configuration
A device’s configuration can also be imported or exported:
To clone the configurations of a Programmable “DALI / BACnet Master - Converter” in order
to configure another device in the same manner, it is necessary to maintain the folder and
all its contents;
To clone a project in order to obtain a different version of the project, it is sufficient to
duplicate the project folder with another name and open the new folder with the button
“Open Configuration”

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
DALI /
BAC
net
M
aster
-
Converter
Document code: MN67832_ENG Revision 1 000 Pagina 16 di 42
SOFTWARE OPTIONS:
By pressing the “Settings” ( ) button there is the possibility to change the language of the software and check the updatings for the
compositor
In the section “Language” it is possible to change the language of the
software
In the section “Connection Options”, it is possible to check if there are some
updatings of the software compositor in ADFweb com website
Checking the option “Check Software Update at Start of Program”, the
SW67832 check automatically if there are updatings when it is launched

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
DALI /
BAC
net
M
aster
-
Converter
Document code: MN67832_ENG Revision 1 000 Pagina 17 di 42
In the section “Software Settings”, it is possible to enable/disable some
keyboard’s commands for an easier navigation inside the tables contained in
the different sections of the software

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
DALI /
BAC
net
M
aster
-
Converter
Document code: MN67832_ENG Revision 1 000 Pagina 18 di 42
SET COMMUNICATION:
This section define the fundamental communication parameters of BACnet Slave and DALI bus
By Pressing the “Set Communication” button from the main window for SW67832 (Fig 2) the window
“Set Communication” appears (Fig 3)
In the section “BACnet Type” it is possible to select the type of BACnet to use from:
BACnet/IP (it uses Ethernet);
BACnet MS/TP (it uses RS485)
If selected “BACnet/IP” the means of the fields for “BACnet” are:
In the fields “IP ADDRESS” the IP address of BACnet/IP side of the converter is defined;
In the fields “SUBNET Mask” the SubNet Mask of BACnet/IP side of the converter is defined;
In the fields “GATEWAY” the default gateway of the network is defined This feature can be
enabled or disabled pressing the Check Box field This feature is used for going out of the net;
In the field “Port” the port used for BACnet communication is defined The default port used for
BACnet communication is 47808, but is possible to insert any value;
In the field "BACnet Device Name" the name of BACnet/IP side of the converter is defined;
In the field “Device Identifier” the device instance of BACnet/IP side of the converter is defined
If selected “BACnet MS/TP” the means of the fields for “BACnet” are:
In the field “Baudrate” the baudrate of BACnet MS/TP side of the converter is defined;
In the field “Parity” the parity of BACnet MS/TP side of the converter is defined;
In the field “BACnet Device Name” the name of BACnet MS/TP side of the converter is defined;
In the field “MAC Address” the MAC of BACnet MS/TP side of the converter is defined;
The field “Max Masters” specifies the highest allowable address for master nodes The value
shall be less than or equal to 127;
The field “Max Info Frames” specifies the maximum number of information frames the node
may send before it must pass the token; Figure 3: “Set Communication” window

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
DALI /
BAC
net
M
aster
-
Converter
Document code: MN67832_ENG Revision 1 000 Pagina 19 di 42
In the field “Device Istance” it is possible to assign a number to the BACnet node (used for the Device Istance);
In the field “Network” the MS/TP network ID for the converter is defined
The means of the fields for the “DALI” section are:
In the field “DALI Console Port” the UDP port used for the communication with ‘DALI Console’ software is defined;
If the field “Enable DALI 2” is checked, DALI 2 protocol is enabled
If the field “Disable DALI Scan” is checked, the automatic scan of DALI network is disabled;

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
DALI /
BAC
net
M
aster
-
Converter
Document code: MN67832_ENG Revision 1 000 Pagina 20 di 42
DALI ACCESS:
By pressing the “DALI Access” button from the main window for SW67832 (Fig 2) the window “Select the DALI Device Present in the
Network” appears (Fig 4)
This section is composed by three tables used to define the list of DALI devices to control, the DALI sensors to read and the DALI router’s
functions
S ELECT D EVICE
The “Select Device” section (Fig 4a) is used to list the DALI ballast to read/write The means of the fields are:
If the field “Enable” is checked, the DALI ballast is present in the network and connected to the converter;
If the field “Min-Max Value” is checked, the DALI ballast will be dimmed only between the configured minimum and maximum light
levels;
In the field “Recall Level” the light level to command when the ballast is toggled (ON/OFF) is defined It is possible to define:
oNone: function not enabled;
oRecall Min-Max Level for Switch: the DALI device is toggled between configured minimum and maximum light levels;
oRecall Old Value Level for Switch: the DALI device is toggled between 0 and last light level
Figure
4
a
:
“
Select Device
” window