ADF Web HD67171-A1 User manual

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
CAN / SNMP
M
anager
Document code: MN67171_ENG Revision 1.000 Pa ina 1 di 30
User Manual
Revision 1.000
En lish
CAN / SNMP Manager - Converter
(Order Code: HD67171-A1, HD67171-B2)
for Website information:
www.adfweb.com?Product=HD67171
for Price information:
www.adfweb.com?Price=HD67171-A1
www.adfweb.com?Price=HD67171-B2
Benefits and Main Features:
Very easy to confi ure
Electrical isolation
Temperature ran e: -40°C/85°C (-40°F/185°F)
For others SNMP Mana er products, see also the followin links:
Converter SNMP to
www.adfweb.com?Product=HD67B47 (OPC UA Server)
www.adfweb.com?Product=HD67D40 (LoRaWAN)
www.adfweb.com?Product=HD67E24 ( therCAT)
www.adfweb.com?Product=HD67041 (DMX)
www.adfweb.com?Product=HD67092 (M-Bus Wireless)
www.adfweb.com?Product=HD67156 (CANopen)
www.adfweb.com?Product=HD67159 ( therNet/IP)
www.adfweb.com?Product=HD67160 (DeviceNet Master)
www.adfweb.com?Product=HD67161 (DeviceNet Slave)
www.adfweb.com?Product=HD67162 (J1939)
www.adfweb.com?Product=HD67163 (M-Bus Master)
www.adfweb.com?Product=HD67164 (Modbus Master)
www.adfweb.com?Product=HD67165 (Modbus Slave)
www.adfweb.com?Product=HD67166 (Modbus TCP Master)
www.adfweb.com?Product=HD67167 (Modbus TCP Slave)
www.adfweb.com?Product=HD67168 (PROFIBUS Master)
www.adfweb.com?Product=HD67169 (PROFIBUS Slave)
www.adfweb.com?Product=HD67170 (BACnet Slave)
www.adfweb.com?Product=HD67172 (CANopen)
www.adfweb.com?Product=HD67173 (DeviceNet Slave)
www.adfweb.com?Product=HD67174 ( therNet/IP)
www.adfweb.com?Product=HD67176 (Modbus TCP Slave)
www.adfweb.com?Product=HD67177 (PROFIBUS Slave)
www.adfweb.com?Product=HD67178 (PROFIN T Slave)
www.adfweb.com?Product=HD67613 (PROFIN T)
www.adfweb.com?Product=HD67693 (BACnet Slave)
www.adfweb.com?Product=HD67726 (BACnet Master)
www.adfweb.com?Product=HD67753 (I C 61850 Server)
www.adfweb.com?Product=HD67820 (KNX)
www.adfweb.com?Product=HD67849 (DALI)
www.adfweb.com?Product=HD67953 (MQTT)
www.adfweb.com?Product=HD67986 (IO-Link Slave)
Do you have an your customer protocol?
www.adfweb.com?Product=HD67003
Do you need to choose a device? do you want help?
www.adfweb.com?Cmd=helpme
User Manual

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
CAN / SNMP
M
anager
Document code: MN67171_ENG Revision 1.000 Pa ina 2 di 30
IND X:
Pa e
INDEX 2
UPDATED DOCUMENTATION 2
REVISION LIST 2
WARNING 2
TRADEMARKS 2
SECURITY ALERT 3
EXAMPLE OF CONNECTION 4
CONNECTION SCHEME 5
CHARACTERISTICS 7
CONFIGURATION 7
POWER SUPPLY 8
FUNCTION MODES 9
LEDS 10
SNMP 11
CAN 12
USE OF COMPOSITOR SW67171 13
NEW PROJECT / OPEN PROJECT 14
SOFTWARE OPTIONS 15
SET COMMUNICATION 17
SET SNMP ACCESS 19
RECEIVE FRAMES 20
SEND FRAMES 22
UPDATE DEVICE 24
MECHANICAL DIMENSIONS 26
ORDERING INFORMATIONS 28
ACCESSORIES 28
DISCLAIMER 29
OTHER REGULATIONS AND STANDARDS 29
WARRANTIES AND TECHNICAL SUPPORT 30
RETURN POLICY 30
UPDAT D DOCUM NTATION:
Dear customer, we thank you for your attention and we remind you that
you need to check that the followin document is:
Updated
Related to the product you own
To obtain the most recently updated document, note the “document code”
that appears at the top ri ht-hand corner of each pa e of this document.
With this “Document Code” o to web pa e www.adfweb.com/download/
and search for the correspondin code on the pa e. Click on the proper
“Document Code” and download the updates.
R VISION LIST:
WARNING:
ADFweb.com reserves the ri ht to chan e information in this manual about
our product without warnin .
ADFweb.com is not responsible for any error this manual may contain.
TRAD MARKS:
All trademarks mentioned in this document belon to their respective
owners.
Revision Date Author Chapter Description
1.000 07/01/2020 Ff All First Release

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
CAN / SNMP
M
anager
Document code: MN67171_ENG Revision 1.000 Pa ina 3 di 30
S CURITY AL RT:
G N RAL I NFORMATION
To ensure safe operation, the device must be operated accordin to the instructions in the manual. When usin the device, le al and
safety re ulation are required for each individual application. The same applies also when usin accessories.
I NT ND D U S
Machines and systems must be desi ned so the faulty conditions do not lead to a dan erous situation for the operator (i.e.
independent limit switches, mechanical interlocks, etc.).
Q UALIFI D P RSONN L
The device can be used only by qualified personnel, strictly in accordance with the specifications.
Qualified personnel are persons who are familiar with the installation, assembly, commissionin and operation of this equipment and
who have appropriate qualifications for their job.
R SIDUAL R ISKS
The device is state-of-the-art and is safe. The instruments can represent a potential hazard if they are inappropriately installed and
operated by untrained personnel. These instructions refer to residual risks with the followin symbol:
This symbol indicates that non-observance of the safety instructions is a dan er for people that could lead to serious injury or
death and / or the possibility of dama e.
C CONFORMITY
The declaration is made by our company. You can send an email to [email protected]om or ive us a call if you need it.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
CAN / SNMP
M
anager
Document code: MN67171_ENG Revision 1.000 Pa ina 4 di 30
XAMPL OF CONN CTION:

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
CAN / SNMP
M
anager
Document code: MN67171_ENG Revision 1.000 Pa ina 5 di 30
CONN CTION SCH M :
Figure 1a: Connection scheme for HD67171-A1

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
CAN / SNMP
M
anager
Document code: MN67171_ENG Revision 1.000 Pa ina 6 di 30
Figure 1b: Connection scheme for HD67171-B2

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
CAN / SNMP
M
anager
Document code: MN67171_ENG Revision 1.000 Pa ina 7 di 30
CHARACT RISTICS:
The HD67171-A1 and HD67171-B2 is a CAN / SNMP Mana er - Converter.
It has the followin characteristics:
Up to 1024 bytes in readin and 1024 bytes in writin ;
Triple isolation between CAN - Power Supply, CAN - Ethernet, Power Supply - Ethernet.
Two-directional information between CAN bus and SNMP bus;
Mountable on 35mm Rail DIN;
Wide power supply input ran e: 8…24V AC or 12…35V DC;
Wide temperature ran e: -40°C / 85°C [-40°F / +185°F].
CONFIGURATION:
You need Compositor SW67171 software on your PC in order to perform the followin :
Define the parameter of SNMP line;
Define the parameter of CAN line;
Define the CAN frames that the converter can accept;
Define the CAN frames that the converter sends trou h the CAN line;
Define the map of CAN byte that must be written in the SNMP array;
Define the map of which SNMP bytes must be written in CAN frames;
Update the device.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
CAN / SNMP
M
anager
Document code: MN67171_ENG Revision 1.000 Pa ina 8 di 30
POW R SUPPLY:
The devices can be powered at 8…24V AC and 12…35V DC. For more details see the two tables below.
VAC
VDC
Vmin Vmax Vmin Vmax
8V 24V 12V 35V
Consumption at 24V DC:
Device Consumption [W/VA]
HD67171-A1 3.5
HD67171-B2 3.5
HD671
71
-
A1
Caution:
Not reverse the polarity power
HD67
1
71
-
B2

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
CAN / SNMP
M
anager
Document code: MN67171_ENG Revision 1.000 Pa ina 9 di 30
FUNCTION MOD S:
The device has ot two functions mode dependin of the position of the ‘Dip1 of Dip-Switch A’:
The first, with ‘Dip1 of Dip-Switch A’ at “OFF” position, is used for the normal workin of the device.
The second, with ‘Dip1 of Dip-Switch A’ at “ON” position, is used for upload the Project and/or Firmware.
For the operations to follow for the updatin , see ‘UPDATE DEVICE’ section.
Accordin to the functionin mode, the LEDs will have specifics functions, see ‘LEDS’ section.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
CAN / SNMP
M
anager
Document code: MN67171_ENG Revision 1.000 Pa ina 10 di 30
L DS:
The devices has ot four (five for HD67515-B2) LEDs that are used to ive information of the functionin status.
The various meanin s of the LEDs are described in the table below.
L D Normal Mode Boot Mode
1: Device State Blinks slowly (~1Hz) Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in pro ress
2: SNMP Communication Blinks when SNMP responses are received Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
3: Ethernet Link ON: Ethernet cable connected
OFF: Ethernet cable disconnected
ON: Ethernet cable connected
OFF: Ethernet cable disconnected
4: CAN Communication Blinks when CAN frames are received Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in pro ress
5: Not used (Present only on
HD67171-B2) OFF Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in pro ress

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
CAN / SNMP
M
anager
Document code: MN67171_ENG Revision 1.000 Pa ina 11 di 30
SNMP:
The SNMP connection must be made usin Connector5 of HD67171-A1/B2 with at least a Cate ory 5E cable. The maximum len th of the
cable should not exceed 100m. The cable has to conform to the T568 norms relative to connections in cat.5 up to 100 Mbps. To connect the
device to an Hub/Switch is recommended the use of a strai ht cable, to connect the device to a PC/other is recommended the use of a cross
cable.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
CAN / SNMP
M
anager
Document code: MN67171_ENG Revision 1.000 Pa ina 12 di 30
CAN:
For terminate the CAN line with a 120Ω resistor it is necessary that the Dip1 of ‘Dip-Switch C’ is at ON position.
Cable characteristics:
DC parameter: Impedance 70 Ohm/m
AC parameters: Impedance 120 Ohm/m
Delay 5 ns/m
Length Baud Rate [bps] Length MAX [m]
10 K 5000
20 K 2500
50 K 1000
100 K 650
125 K 500
250 K 250
500 K 100
800 K 50
1000 K 25

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
CAN / SNMP
M
anager
Document code: MN67171_ENG Revision 1.000 Pa ina 13 di 30
US OF COMPOSITOR SW67171:
To confi ure the Converter, use the available software that runs with Windows called SW67171. It is downloadable on the site
www.adfweb.com and its operation is described in this document. (This manual is referenced to the last version of the software present on
our web site). The software works with MSWindows (XP, Vista, Seven, 8, 10; 32/64bit).
When launchin the SW67171, the window below appears (Fi . 2).
Note:
It is necessary to have installed .Net Framework 4.
Figure 2: Main window for SW671
71

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
CAN / SNMP
M
anager
Document code: MN67171_ENG Revision 1.000 Pa ina 14 di 30
N W CONFIGURATION / OP N CONFIGURATION:
The “New Configuration” button creates the folder which contains the entire device’s confi uration.
A device’s confi uration can also be imported or exported:
To clone the confi urations of a Pro rammable “CAN / SNMP Mana er - Converter” in
order to confi ure another device in the same manner, it is necessary to maintain the
folder and all its contents;
To clone a project in order to obtain a different version of the project, it is sufficient to
duplicate the project folder with another name and open the new folder with the
button “Open Configuration”.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
CAN / SNMP
M
anager
Document code: MN67171_ENG Revision 1.000 Pa ina 15 di 30
SOFTWAR OPTIONS:
By pressin the “Settings” ( ) button there is the possibility to chan e the lan ua e of the software and check the updatin s for the
compositor.
In the section “Lan ua e” it is possible to chan e the lan ua e of the
software.
In the section “Connection Options”, it is possible to check if there are some
updatin s of the software compositor in ADFweb.com website.
Checkin the option “Check Software Update at Start of Program”, the
SW67171 check automatically if there are updatin s when it is launched.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
CAN / SNMP
M
anager
Document code: MN67171_ENG Revision 1.000 Pa ina 16 di 30
In the section “Software Settin s”, it is possible to enable/disable some
keyboard’s commands for an easier navi ation inside the tables contained in
the different sections of the software.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
CAN / SNMP
M
anager
Document code: MN67171_ENG Revision 1.000 Pa ina 17 di 30
S T COMMUNICATION:
This section define the fundamental communication parameters of two buses, SNMP and CAN.
By Pressin the “Set Communication” button from the main window for SW67171 (Fi . 2) the
window “Set Communication” appears (Fi . 3).
The window is divided in two sections, one for the SNMP and the other for the CAN.
The means of the fields for “SNMP Mana er” are:
In the fields “IP ADDR SS” the IP address of the converter is defined;
In the fields “SUBN T Mask” the SubNet Mask of the converter is defined;
In the fields “GAT WAY” the default ateway of the network is defined. This feature can be
enabled or disabled pressin the Check Box field. This feature is used for oin out of the net;
In the field "SNMP Name of Station" the name for SNMP Mana er station is defined;
The means of the fields for the “CAN” section are:
In the field “Baudrate” the CAN baudrate is defined.
Figure
3
:
“Set Communication” window

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
CAN / SNMP
M
anager
Document code: MN67171_ENG Revision 1.000 Pa ina 18 di 30
S T SNMP ACC SS:
By Pressin the “SNMP Manager” button from the main window for SW67171 (Fi . 2) the window “Set SNMP Mana er Access” appears
(Fi . 4).
The meanin of the fields in the window are the follows:
If the field “ nable” is checked, the SNMP request is enabled;
In the field “IP Address” the address of the SNMP Mana er device to read/write is defined;
In the field “Version” the SNMP version used to send the SNMP request (1 or 2 is allowed) is defined;
In the field “Community Name” the Community Name used for the SNMP request is defined (selectable or editable manually);
In the field “OID” the OID to read/write from/to the SNMP Mana er device is defined;
In the field “Type” the type of data to read/write (‘Strin ’ or ‘Int’) is defined;
In the field “Mode” the type of SNMP request used (‘Get’, ‘Set’ or ‘Trap’) is defined;
By checkin the field “On Change” the SNMP request (only for ‘Set’ Mode) is made only if SNMP data written by CAN side are
chan ed;
By checkin the field “OnCMD” the SNMP request is sent only when a CAN messa e for the associated variable is received;
If the field “On Timer” is checked, the SNMP request is sent cyclically;
In the field “Time” the delay in ms between two SNMP requests is defined (if “On Timer” is checked);
In the field “Position” it is possible to select the position where take/save the data from/to the internal memory array;
Figure
4
:
“Set SNM Manager Access” window

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
CAN / SNMP
M
anager
Document code: MN67171_ENG Revision 1.000 Pa ina 19 di 30
In the field “Num Bytes” it is possible to select define the dimension of the SNMP data;
In the field “Conversion” it is possible to select the conversion to apply to the data read/written from/to the SNMP Mana er;
If the field “Cancel” is checked, if the answer to the SNMP request is missin , the data on SNMP side are set to ‘0’;
If SNMP version is set to ‘3’, the followin fields must be set:
oIn the field “User” the user for the SNMP authentication is defined;
oIn the field “Auth Pass” the password for the SNMP aithentication is defined;
oIn the field “Priv Pass” the password for Privacy authentication is defined;
oIn the field “Security Level” the type of security used is defined;
oIn the field “Auth Mode” the mode used for the authentication is defined;
oIn the field “Priv Mode” the mode used for Privacy is defined;
In the field “Mnemonic” a description of the data inserted in the row is defined.
Note:
If the field “On chan e” and “On Timer” is checked and the “Poll Time” is different from 0, the converter sends the SNMP writin
request cyclically and also when the data is chan ed.
Note:
If the “Trap” mode is used, the fields “On Chan e” and “On Timer” must be disabled.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
CAN / SNMP
M
anager
Document code: MN67171_ENG Revision 1.000 Pa ina 20 di 30
R C IV FRAM S:
By pressin the “Receive Frames” button from the main window for SW67171 (Fi . 2) the “Receive CAN Frames” window appears (Fi . 5).
The COB inserted in this table contains the Output data of SNMP. These frames are accepted by the Converter.
The data of the columns have the followin meanin s:
If the field “ nable” is checked, the CAN frame is enabled;
In the field “Cob-ID” the COB of the CAN frame is defined;
In the field “Type” the type of CAN packet use for the Cob-ID is defined (2.0A (11 bits) or 2.0B (29 bits));
In the field “Dimension” the number of byte of the COB (from 1 to 8) is defined;
The field “TimeOut” is used for put at zero the data into SNMP array if the CAN frame arrives with a frequency less than the time
expressed in the field. If the value in the field is ‘0’, it means that you don’t want to use this feature;
In the field “Byte1” insert the byte of the SNMP array where savin 1st byte of the CAN messa e;
In the field “Byte2” insert the byte of the SNMP array where savin 2nd byte of the CAN messa e;
In the field “Byte3” insert the byte of the SNMP array where savin 3rd byte of the CAN messa e;
In the field “Byte4” insert the byte of the SNMP array where savin 4th byte of the CAN messa e;
In the field “Byte5” insert the byte of the SNMP array where savin 5th byte of the CAN messa e;
In the field “Byte6” insert the byte of the SNMP array where savin 6th byte of the CAN messa e;
Figure
5
: “Receive
CAN
Frames” window