ADF Web HD67778-A1 User manual

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
IEC61850 Client /
PROFINET
Slave
Document code: MN67778_ENG Revision 1.000 age 1 of 31
User Manual
Revision 1.000
English
IEC61850 Client / PROFINET Slave -
Converter
(Order Code: HD67778-A1)
for Website information:
http://www.adfweb.com/? roduct=HD67778
for rice information:
http://www.adfweb.com/? rice=HD67778-A1
Benefits and ain Features:
Triple electrical isolation
Two Ethernet ports
Temperature range: -40°C/+85°C (-40°F/+185°F)
For others IEC61850 Client devices, see also the following links:
www.adfweb.com? roduct=HD67D34 (LoRaWAN)
www.adfweb.com? roduct=HD67E14 (EtherCAT)
www.adfweb.com? roduct=HD67765 ( odbus Slave)
www.adfweb.com? roduct=HD67766 ( odbus TCP Slave)
www.adfweb.com? roduct=HD67767 (BACnet Slave)
www.adfweb.com? roduct=HD67768 (CAN)
www.adfweb.com? roduct=HD67769 (CANopen)
www.adfweb.com? roduct=HD67770 (DeviceNet Slave)
www.adfweb.com? roduct=HD67771 (EtherNet/IP Slave)
www.adfweb.com? roduct=HD67772 (J1939)
www.adfweb.com? roduct=HD67773 (KNX)
www.adfweb.com? roduct=HD67774 ( QTT)
www.adfweb.com? roduct=HD67775 (N EA0183)
www.adfweb.com? roduct=HD67776 (N EA2000)
www.adfweb.com? roduct=HD67778 (PROFINET)
www.adfweb.com? roduct=HD67779 (SN P Agent)
www.adfweb.com? roduct=HD67780 (Serial)
www.adfweb.com? roduct=HD67781 (Ethernet)
Do you have an your customer protocol?
See the following links:
www.adfweb.com? roduct=HD67003
Do you need to choose a device? do you want help?
Ask it to the following link:
www.adfweb.com?Cmd=helpme
User Manual

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
IEC61850 Client /
PROFINET
Slave
Document code: MN67778_ENG Revision 1.000 age 2 of 31
INDEX:
age
INDEX 2
U DATED DOCUMENTATION 2
REVISION LIST 2
WARNING 2
TRADEMARKS 2
SECURITY ALERT 3
EXAM LE OF CONNECTION 4
CONNECTION SCHEME 5
CHARACTERISTICS 6
CONFIGURATION 6
OWER SU LY 7
FUNCTION MODES 8
LEDS 9
ETHERNET 10
USE OF COM OSITOR SW67778 11
NEW ROJECT / O EN ROJECT 12
SOFTWARE O TIONS 13
SET COMMUNICATION 15
IEC61850 ACCESS 16
ROFINET XML 22
U DATE DEVICE 23
LC CONFIGURATION 25
MECHANICAL DIMENSIONS 28
ORDERING INFORMATIONS 29
ACCESSORIES 29
DISCLAIMER 30
OTHER REGULATIONS AND STANDARDS 30
WARRANTIES AND TECHNICAL SU ORT 31
RETURN OLICY 31
Pagina 2 di 31
UPDATED DOCU ENTATION:
Dear customer, we thank you for your attention and we remind you that
you need to check that the following document is:
Updated
Related to the product you own
To obtain the most recently updated document, note the “document code”
that appears at the top right-hand corner of each page of this document.
With this “Document Code” go to web page www.adfweb.com/download/
and search for the corresponding code on the page. Click on the proper
“Document Code” and download the updates.
REVISION LIST:
Revision Date Author Chapter Description
1.000 13/03/2020 VDB All First release version
WARNING:
ADFweb.com reserves the right to change information in this manual about
our product without warning.
ADFweb.com is not responsible for any error this manual may contain.
TRADE ARKS:
All trademarks mentioned in this document belong to their respective
owners.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
IEC61850 Client /
PROFINET
Slave
Document code: MN67778_ENG Revision 1.000 age 3 of 31
SECURITY ALERT:
G ENERAL I NFOR ATION
To ensure safe operation, the device must be operated according to the instructions in the manual. When using the device, legal and
safety regulation are required for each individual application. The same applies also when using accessories.
I NTENDED U SE
Machines and systems must be designed so the faulty conditions do not lead to a dangerous situation for the operator (i.e.
independent limit switches, mechanical interlocks, etc.).
Q UALIFIED P ERSONNEL
The device can be used only by qualified personnel, strictly in accordance with the specifications.
Qualified personnel are persons who are familiar with the installation, assembly, commissioning and operation of this equipment and
who have appropriate qualifications for their job.
R ESIDUAL R ISKS
The device is state-of-the-art and is safe. The instruments can represent a potential hazard if they are inappropriately installed and
operated by untrained personnel. These instructions refer to residual risks with the following symbol:
This symbol indicates that non-observance of the safety instructions is a danger for people that could lead to serious injury or
death and / or the possibility of damage.
CE CONFOR ITY
The declaration is made by our company. You can send an email to [email protected]om or give us a call if you need it.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
IEC61850 Client /
PROFINET
Slave
Document code: MN67778_ENG Revision 1.000 age 4 of 31
EXA PLE OF CONNECTION:

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
IEC61850 Client /
PROFINET
Slave
Document code: MN67778_ENG Revision 1.000 age 5 of 31
CONNECTION SCHE E:
Figure
1
: Connection scheme for HD67
7
78
-
A1

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
IEC61850 Client /
PROFINET
Slave
Document code: MN67778_ENG Revision 1.000 age 6 of 31
CHARACTERISTICS:
The HD67778-A1 is a IEC61850 Client / ROFINET Slave converter.
It allows the following characteristics:
Up to 1440 bytes in reading and 1440 bytes in writing;
Two-directional information between ROFINET and IEC61850;
Mountable on 35mm Rail DIN;
Wide power supply input range: 8…24V AC or 12…35V DC;
Wide temperature range: -40°C / 85°C [-40°F / +185°F].
CONFIGURATION:
You need Compositor SW67778 software on your C in order to perform the following:
Define the parameters of the IEC61850;
Define the parameters of the ROFINET;
Define IEC61850 variables to be read by the ROFINET master;
Define IEC61850 variables to be written by the ROFINET master;
Update the device.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
IEC61850 Client /
PROFINET
Slave
Document code: MN67778_ENG Revision 1.000 age 7 of 31
POWER SUPPLY:
The devices can be powered between a wide range of tensions. For more details see the two tables below.
VAC
VDC
Vmin Vmax Vmin Vmax
HD67778-A1 8V 24V 12V 35V
Consumption at 24V DC:
Device W/VA
HD67778-A1 4
Caution: Not reverse the polarity power
HD67778-A1

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
IEC61850 Client /
PROFINET
Slave
Document code: MN67778_ENG Revision 1.000 age 8 of 31
FUNCTION ODES:
The device has got two functions mode depending of the position of the Dip1 of ‘Dip-Switch A’:
The first, with Dip1 in Off position (factory setting), is used for the normal working of the device.
The second, with Dip1 in On position, is used for upload the roject/Firmware.
For the operations to follow for the updating (see ‘U DATE DEVICE’ section).
According to the functioning mode, the LEDs will have specifics functions (see ‘LEDS’ section).

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
IEC61850 Client /
PROFINET
Slave
Document code: MN67778_ENG Revision 1.000 age 9 of 31
LEDS:
The device has got six LEDs that are used to give information of the functioning status.
The various meanings of the LEDs are described in the table below.
LED Normal ode Boot ode
1: ON [supply voltage ]
(green)
ON: Device powered
OFF: Device not powered
ON: Device powered
OFF: Device not powered
2: MT [maintenance display]
(yellow)
ON: Maintenance roblem is present
OFF: No maintenance are present
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
3: BF [bus fault] (red)
ON: The Ethernet connection is defective; the I
address exists several times in the network; the own
NameOfStation exists several times in the network; no
I address has been set
Flashing: At least one configured AR is no longer in
the data exchange
OFF: No errors are present
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
4: SF [group error] (red) ON: At least one AR is not in the data exchange
OFF: No errors are present
Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
5: Ethernet1 Tx (green) Blinks when is transmitting Ethernet frames Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress
6: Ethernet2 Tx (green) Blinks when is transmitting Ethernet frames Blinks quickly: Boot state
Blinks very slowly (~0.5Hz): update in progress

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
IEC61850 Client /
PROFINET
Slave
Document code: MN67778_ENG Revision 1.000 age 10 of 31
ETHERNET:
The Ethernet connection must be made using Connector3 or Connector4 of HD67778-A1 with at least a Category 5E cable. The maximum
length of the cable should not exceed 100m. The cable has to conform to the T568 norms relative to connections in cat.5 up to 100 Mbps. To
connect the device to an Hub/Switch is recommended the use of a straight cable, to connect the device to a C/ LC/other is recommended
the use of a cross cable.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
IEC61850 Client /
PROFINET
Slave
Document code: MN67778_ENG Revision 1.000 age 11 of 31
USE OF CO POSITOR SW67778:
To configure the Converter, use the available software that runs with Windows called SW67778. It is downloadable on the site
www.adfweb.com and its operation is described in this document. (This manual is referenced to the last version of the software present on
our web site). The software works with MSWindows (X , Vista, Seven, 8, 10; 32/64bit).
When launching the SW67778, the window below appears (Fig. 2).
Note:
It is necessary to have installed .Net Framework 4.
Figure 2: Main window for SW677
78

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
IEC61850 Client /
PROFINET
Slave
Document code: MN67778_ENG Revision 1.000 age 12 of 31
NEW CONFIGURATION / OPEN CONFIGURATION:
The “New Configuration” button creates the folder which contains the entire device’s configuration.
A device’s configuration can also be imported or exported:
To clone the configurations of a programmable “IEC61850 Client / ROFINET Slave -
Converter” in order to configure another device in the same manner, it is necessary to
maintain the folder and all its contents;
To clone a project in order to obtain a different version of the project, it is sufficient to
duplicate the project folder with another name and open the new folder with the
button “Open Configuration”.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
IEC61850 Client /
PROFINET
Slave
Document code: MN67778_ENG Revision 1.000 age 13 of 31
SOFTWARE OPTIONS:
By pressing the “Settings” ( ) button there is the possibility to change the
language of the software and check the updatings for the compositor.
In the section “Language” it is possible to change the language of the
software.
In the section “Connection Options”, it is possible to check if there are some
updatings of the software compositor in ADFweb.com website.
Checking the option “Check Software Update at Start of Program”, the
SW67778 check automatically if there are updatings when it is launched.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
IEC61850 Client /
PROFINET
Slave
Document code: MN67778_ENG Revision 1.000 age 14 of 31
In the section “Software Settings”, it is possible to enable/disable some
keyboard’s commands for an easier navigation inside the tables contained in
the different sections of the software.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
IEC61850 Client /
PROFINET
Slave
Document code: MN67778_ENG Revision 1.000 age 15 of 31
SET CO UNICATION:
This section define the fundamental communication parameters of two buses,
IEC61850 and ROFINET.
By ressing the “Set Communication” button from the main window for SW67778
(Fig. 2) the window “Set Communication” appears (Fig. 3).
The means of the fields for “IEC61850 Client” are:
In the fields “IP Address” the I address for IEC61850 side of the converter is
defined;
In the fields “SubNet ask” the SubNet Mask for IEC61850 side of the
converter is defined;
In the fields “Gateway” the default gateway of the net is defined. This feature
can be enabled or disabled pressing the Check Box field. This feature is used for
going out of the net;
In the field "VLAN" the identifier for the VLAN is defined;
In the field “Application ID” the Goose identification string is defined.
The means of the fields for “ ROFINET” are:
In the field “IP Address” the I address of the converter is defined;
In the field “SubNet ask” the Subnet Mask of the converter is defined;
In the field “Gateway” the default gateway of the net is defined. This feature
can be enabled or disabled pressing the Check Box field. This feature is used for
going out of the net;
In the field "Name of Station" the name of the ROFINET node is defined;
In the fields “Number Byte IN” the number of input byte of the converter is
defined;
In the fields “Number Byte Out” the number of output byte of the converter is
defined.
Figure 3: “Set Communication” window

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
IEC61850 Client /
PROFINET
Slave
Document code: MN67778_ENG Revision 1.000 age 16 of 31
Figure 4: “
IEC61850 Client Set Access
” window
IEC61850 ACCESS:
By ressing the “IEC61850 Access” button from the main window for SW67778 (Fig. 2) the window “IEC61850 Client Set Access” appears
(Fig. 4).
This section is used to define the list of IEC61850 variables from/to which take/map the data of ROFINET.

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
IEC61850 Client /
PROFINET
Slave
Document code: MN67778_ENG Revision 1.000 age 17 of 31
Figure 5: functional structure
By clicking on “ADD IEC Device”, it is possible to add a new IEC61850 Server. A SCL file has to be selected (the allowed extensions are
.scd, .ssd, .sed, .icd, .iid or .cid). The functional structure of the Server (Logical Devices, Logical Nodes, Data Objects and Data Attributes)
will be visible (Fig. 5). The last leaves in the branches of the structure are the variables which can be added to the “Variables” section on the
right (Fig. 6).

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
IEC61850 Client /
PROFINET
Slave
Document code: MN67778_ENG Revision 1.000 age 18 of 31
Figure 6: “Variables” section
The meanings of the fields are:
In the field “Index” the index of the server to which the IEC61850 variable belongs is defined;
In the field “bType” the data format of the IEC61850 variable is defined;
In the field “fc” the Functional Constraint of the IEC61850 variable is defined;
In the field “Reference” the path of the IEC61850 variable is defined;
In the field “Start Byte”the starting byte of the internal memory array where taking the data is defined;
In the field “Num Byte”the number of consecutive bytes to take from the internal array starting from “Start Byte” is defined;
In the field “IP Address” the I Address of the server to which the IEC61850 variable belongs is defined;
In the field “Port” the ort of the server to which the IEC61850 variable belongs is defined;

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
IEC61850 Client /
PROFINET
Slave
Document code: MN67778_ENG Revision 1.000 age 19 of 31
If the field “On Change” is checked, the IEC61850 variable is sent when the data on ROFINET changes the value (only in write);
If the field “On C D” is checked, the IEC61850 variable is sent when a ROFINET request is received (only in write);
If the field “On Timer” is checked, the IEC61850 variable is sent/read cyclically;
In the field “Time (ms)” the delay in ms between two readings/writings of the variable is defined (if “On Timer” is checked);
In the field “Position” the starting byte of the internal memory arrays where saving/getting the value is defined.
Note:
Not all variables can be written. It depends on their Functional Constraints (fc).

Industrial Electronic Devices
ADFweb.com Srl – IT31010 – Mareno – Treviso INFO: www.adfweb.com hone +39.0438.30.91.31
User Manual
IEC61850 Client /
PROFINET
Slave
Document code: MN67778_ENG Revision 1.000 age 20 of 31
Figure 7: “DataSet” section
If they are available in the functional structure, it is also possible to add Datasets (DS) to “DataSet” section (Fig. 7).
In the upper part, there are all the inserted Datasets. The meanings of the fields are:
In the field “Index” the index of the server to which the IEC61850 Dataset belongs is defined;
In the field “Reference” the path of the IEC61850 Dataset is defined;
In the field “Goose Name” the Goose Name of the IEC61850 Dataset is defined (if “En. Goose” is checked);
If the field “En. Goose” is checked, the Dataset is received as a Goose message;
In the field “IP Address” the I Address of the server to which the Dataset belongs is defined (if “En. Goose” is unchecked);
In the field “Port” the ort of the server to which the Dataset belongs is defined (if “En. Goose” is unchecked);
In the field “Time (ms)” the delay in ms between two readings of the Dataset is defined (if “En. Goose” is unchecked);
In the field “ nemonic” a description of the Dataset is defined.