ADLINK Technology cPCI-3520 Series User manual

Manual Rev.: 0.3 Preliminary
Revision Date: December 28, 2021
Part No: 50M-00036-1000
cPCI-3520 Series
Performance 3U CompactPCI®
Intel® Xeon® E Processor Blade
User’s Manual
Preliminary

ii Revision History
Revision History
Revision Release Date Description of Change(s)
0.1 2021-07-28 Preliminary release
0.2 2021-09-17 Update specifications, add GPIO
0.3 2021-12-28 Correct cPCI-3520M 100-pin I/O Connector
DVD-D spec; I/O Connectivity Table
Preliminary

Preface iii
cPCI-3520
Preface
Copyright © 2021 ADLINK Technology, Inc.
This document contains proprietary information protected by copy-
right. All rights are reserved. No part of this manual may be repro-
duced by any mechanical, electronic, or other means in any form
without prior written permission of the manufacturer.
Disclaimer
The information in this document is subject to change without prior
notice in order to improve reliability, design, and function and does
not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, spe-
cial, incidental, or consequential damages arising out of the use or
inability to use the product or documentation, even if advised of
the possibility of such damages.
Environmental Responsibility
ADLINK is committed to fulfill its social responsi-
bility to global environmental preservation
through compliance with the European Union's
Restriction of Hazardous Substances (RoHS)
directive and Waste Electrical and Electronic
Equipment (WEEE) directive. Environmental
protection is a top priority for ADLINK. We have
enforced measures to ensure that our products,
manufacturing processes, components, and raw
materials have as little impact on the environment as possible.
When products are at their end of life, our customers are encour-
aged to dispose of them in accordance with the product disposal
and/or recovery programs prescribed by their nation or company.
Battery Labels (for products with battery)
ᑜ㔚ᳰ⺧࿁ᡴ
Preliminary

iv Preface
California Proposition 65 Warning
WARNING: This product can expose you to chemicals
including acrylamide, arsenic, benzene, cadmium,
Tris(1,3-dichloro-2-propyl)phosphate (TDCPP), 1,4-Diox-
ane, formaldehyde, lead, DEHP, styrene, DINP, BBP, PVC, and
vinyl materials, which are known to the State of California to cause
cancer, and acrylamide, benzene, cadmium, lead, mercury,
phthalates, toluene, DEHP, DIDP, DnHP, DBP, BBP, PVC, and
vinyl materials, which are known to the State of California to cause
birth defects or other reproductive harm. For more information go
to www.P65Warnings.ca.gov.
Trademarks
Product names mentioned herein are used for identification pur-
poses only and may be trademarks and/or registered trademarks
of their respective companies.
Conventions
Take note of the following conventions used throughout this
manual to make sure that users perform certain tasks and
instructions properly.
NOTE:
NOTE:
Additional information, aids, and tips that help users perform
tasks.
CAUTION:
Information to prevent minor physical injury, component dam-
age, data loss, and/or program corruption when trying to com-
plete a task.
WARNING:
Information to prevent serious physical injury, component
damage, data loss, and/or program corruption when trying to
complete a specific task.
Preliminary

Table of Contents v
cPCI-3520
Table of Contents
Revision History...................................................................... ii
Preface.................................................................................... iii
List of Figures....................................................................... vii
List of Tables.......................................................................... ix
1 Introduction ........................................................................ 1
1.1 Overview.............................................................................. 1
1.2 Features............................................................................... 2
1.3 Model Number Decoder....................................................... 3
1.4 Package Contents ............................................................... 5
2 Specifications..................................................................... 7
2.1 cPCI-3520 Processor Blade Specifications......................... 7
2.2 cPCI-R3P00(T) RTM Specifications.................................. 11
2.3 Block Diagrams.................................................................. 12
2.4 I/O Connectivity Table ....................................................... 19
2.5 Power Requirements......................................................... 21
3 Functional Description .................................................... 23
3.1 Processors......................................................................... 23
3.2 Chipset............................................................................... 25
3.3 PMC/XMC.......................................................................... 25
3.4 Intel® Turbo Boost Technology......................................... 25
3.5 Intel® Hyper-Threading Technology.................................. 26
3.6 Trusted Platform Module ................................................... 26
3.7 Battery ............................................................................... 27
4 Board Interfaces............................................................... 29
Preliminary

vi Table of Contents
4.1 cPCI-3520 Series Board Layout ........................................ 29
4.2 cPCI-3520 Blade Assembly Layout ................................... 31
4.3 cPCI-3520D Blade Assembly Layout................................. 32
4.4 cPCI-3520G Blade Assembly Layout................................. 33
4.5 cPCI-3520L Blade Assembly Layout ................................. 34
4.6 cPCI-3520M Blade Assembly Layout ................................ 35
4.7 cPCI-3520S Blade Assembly Layout................................. 36
4.8 cPCI-3520 Series Faceplate Layout.................................. 37
4.9 cPCI-R3P00(T) RTM Board Layout................................... 40
4.10 cPCI-R3P00(T) RTM Faceplate......................................... 41
4.11 Connector Pin Assignments............................................... 42
4.12 Jumper Settings................................................................. 68
Important Safety Instructions............................................... 69
Getting Service...................................................................... 71
Preliminary

List of Figures vii
cPCI-3520
List of Figures
Figure 2-1: cPCI-3520 Processor Blade Functional Block Diagram 12
Figure 2-2: cPCI-3520D Daughter Board Functional Block Diagram13
Figure 2-3: cPCI-3520G Daughter Board Functional Block Diagram14
Figure 2-4: cPCI-3520L Daughter Board Functional Block Diagram15
Figure 2-5: cPCI-3520M Daughter Board Functional Block Diagram16
Figure 2-6: cPCI-R3P00 RTM Functional Block Diagram................17
Figure 2-7: cPCI-R3P00T RTM Functional Block Diagram..............18
Figure 4-1: cPCI-3520 Series Board Layout (component side) .......29
Figure 4-2: cPCI-3520 Series Board Layout (solder side) ...............30
Figure 4-3: cPCI-3520 Blade Assembly Layout...............................31
Figure 4-4: cPCI-3520D Blade Assembly Layout.............................32
Figure 4-5: cPCI-3520G Blade Assembly Layout ............................33
Figure 4-6: cPCI-3520L Blade Assembly Layout.............................34
Figure 4-7: cPCI-3520M Blade Assembly Layout............................35
Figure 4-8: cPCI-3520/D/G Faceplate Layout..................................37
Figure 4-9: cPCI-3520L/M/S Faceplate Layout................................38
Figure 4-10: cPCI-R3P00(T) RTM Board Layout...............................40
Figure 4-11: cPCI-R3P00(T) RTM Faceplate.....................................41
Preliminary

viii List of Figures
This page intentionally left blank.
Preliminary

List of Tables ix
cPCI-3520
List of Tables
Table 2-1: cPCI-3520 Processor Blade Specifications.....................7
Table 2-2: cPCI-R3P00(T) RTM Specifications..............................11
Table 2-3: cPCI-3520 I/O Connectivity ...........................................19
Table 4-1: cPCI-3520 Faceplate System LED Descriptions...........39
Table 4-2: USB 2.0 Pin Definition...................................................42
Table 4-3: VGA Pin Definition.........................................................43
Table 4-4: DisplayPort Pin Definition..............................................43
Table 4-5: DVI-I Connector Pin Definition.......................................44
Table 4-6: RJ-45 GbE Pin Definitions.............................................45
Table 4-7: LAN LED Status Definitions...........................................45
Table 4-8: PS/2 Keyboard/Mouse Pin Definition.............................46
Table 4-9: cPCI-3520D/P COM1 (DB-9) Pin Definition...................46
Table 4-10: cPCI-3520D/P COM1 Mode Selection Switch Settings.47
Table 4-11: cPCI-3520G COM1 (RJ-45) Pin Definition ....................48
Table 4-12: cPCI-3520G COM1 (DB-9 adapter) Pin Definition.........48
Table 4-13: RS-422/485 Adapter Dongle Pin Definition ...................49
Table 4-14: cPCI-3520G COM1 with RS-422/485 Dongle Pin Def’n 49
Table 4-15: cPCI-3520G COM2 Pin Header Definition.....................50
Table 4-16: cPCI-R3P00(T) RTM COM4 Pin Definition....................50
Table 4-17: cPCI-R3P00(T) RTM COM5 Pin Definition....................51
Table 4-18: cPCI-R3P00(T) RTM COM5 w/ Dongle Pin Def’n ........51
Table 4-19: cPCI-3520M 100-pin I/O Connector Pin Definition........52
Table 4-20: Serial ATA Connector on RTM......................................54
Table 4-21: SATA on cPCI-3520D/G/M Daughter Board Pin Def’n..54
Table 4-22: CFast Socket Pin Definition...........................................55
Table 4-23: Layer-2 Daughter Board Connector Pin Definition ........56
Table 4-24: Storage Daughter Board Connector Pin Definition........57
Table 4-25: cPCI-3520G Daughter Board Connector Pin Definition.58
Table 4-26: PMC/XMC Daughter Board Connector Pin Definition....59
Table 4-27: PMC Connector Pin Definitions.....................................60
Table 4-28: XMC Connector Pin Definition.......................................62
Table 4-29: GPIO MMIO Addresses.................................................63
Table 4-30: CompactPCI J1 Connector Pin Definition......................64
Table 4-31: CompactPCI J2 Connector Pin Definition......................65
Table 4-32: cPCI-R3P00 rJ2 Connector Pin Definition.....................66
Table 4-33: cPCI-R3P00T rJ2 Connector Pin Definition...................67
Table 4-34: XMC VPWR Select Jumper Settings.............................68
Table 4-35: PMC V(I/O) Select Jumper Settings..............................68
Preliminary

x List of Tables
This page intentionally left blank.
Preliminary

Introduction 1
cPCI-3520
1 Introduction
1.1 Overview
The ADLINK cPCI-3520 Series is a 3U CompactPCI® processor
blade with soldered DDR4-2666 ECC memory up to 32GB. The
ADLINK cPCI-3520 features the Intel® Xeon® E, 8th/9th Gen
Intel® Core™ and Intel® Celeron® G processor (formerly Coffee
Lake-H) with Mobile Intel® CM246 Chipset.
The cPCI-3520 Series is a 3U CompactPCI blade available in sin-
gle-slot (4HP), dual-slot (8HP) or triple-slot (12HP) width form fac-
tors with various daughter boards to provide a broad range of I/O
requirements. Faceplate I/O in the single-slot (4HP) version
includes 1x DVI-I, 2x GbE and 1x USB 3.0 port (these I/O are
common to all versions). Faceplate I/O in the dual-slot (8HP) ver-
sion includes additional 2x USB 2.0, 1x COM, 1x KB/MS and
Line-in/Line-out on the cPCI-3520D or additional 2x DisplayPorts,
1x COM in RJ-45 connector, 1x KB/MS and 1x additional USB 2.0
port on the cPCI-3520G. Two more dual-slot options are the
cPCI-3520L with additional 2x GbE, 1x COM and 2x USB and the
cPCI-3520M with one 100-pin high density connector supporting
additional 2x DVI-D, 2x USB 2.0, 2x COM, 2x KB/MS and
Line-in/Line-out ports.
Graphics support is integrated on the CPU and allows 3 indepen-
dent displays on the faceplate by selecting the cPCI-3520G with
additional 2x DisplayPorts. Storage includes a CFast slot, mSATA
socket or a 32GB onboard SSD and 2.5" SATA drive on the layer 2
daughter board (cPCI-3520D/L/M/P). One optional PCI
32-bit/66MHz PMC site or PCIe x1 XMC site is available on the
8HP or 12HP versions (cPCI-3520S or cPCI-3520P).
Rear I/O signals to J2 include 4x PCIe x1, 3x SATA 3 Gb/s, and 3x
USB 2.0. 3x GPIO and SMBus signals are also routed to the J2
connector. The optional Rear Transition Module (RTM) provides
3x SATA, 2x GbE, 2x USB, 1x COM (Tx/Rx), and 1x VGA port.
The cPCI-3520 is a high performance solution for factory automa-
tion and other industrial applications that require superior data
transfer capability and advanced computing power. The ADLINK
cPCI-3520 provides high manageability, supports Satellite mode
operation as a standalone blade in peripheral slots, and IPMI for
Preliminary

2 Introduction
system health monitoring. A GbE port on the faceplate supports
Intel® AMT 9.0 for remote monitoring.
1.2 Features
X3U CompactPCI blade in 4HP, 8HP or 12HP width form factor
XIntel® Xeon® E, 8th/9th Gen Intel® Core™ Processor
XGraphics and memory controllers integrated in processor
XDual channel DDR4-2666 soldered SDRAM with ECC, up to
32GB
X32-bit, 33/66MHz CompactPCI Interface based on PCI specifi-
cations, universal V(I/O)
XSupports Satellite mode operation as a standalone blade in
peripheral slots
XOptional 32-bit/66MHz PMC or PCIe x1 XMC site
XSupports IPMI for system health monitoring
XDVI-I port on front with VGA switchable to rear I/O by BIOS set-
ting
XAdditional two DisplayPorts on layer 2 daughter board
(cPCI-3520G)
XSupports 3 independent displays
XTwo PCIe Gigabit Ethernet egress ports
XTwo additional PCIe Gigabit Ethernet Controllers routed to
RTM (cPCI-R3P00)
XAdditional two Gigabit Ethernet ports on 80mm RTM
(cPCI-R3P00T)
XLine-in and Line-out ports on faceplate (cPCI-3520D)
XCFast or mSATA socket for SATA interface storage
XOptional onboard SSD for SATA interface storage (shares
space with CFast socket)
X2.5" SATA connector on 8HP/12HP versions at 6 Gb/s
(cPCI-3520D/G/M/L/P)
Preliminary

Introduction 3
cPCI-3520
1.3 Model Number Decoder
Blades
(A) Operating Temperature Code
Z Blank = -20°C to +70°C
Z EX= -40°C to +85°C (for CPUs with TDP 25W only)
(B) Configuration Code
ZBlank = Single slot width with CFast socket, 1x DVI-I, 1x
USB 3.0, 2x GbE
ZD= Dual slot width with CFast socket, 1x DVI-I, 1x USB 3.0,
2x GbE on layer 1; 2x USB 2.0, COM (RS-232/422/485),
PS/2 KB/MS, Line-in, Line-out ports and 2.5" SATA drive
space on layer 2
ZG= Dual slot width with CFast socket, 1x DVI-I, 1x USB 3.0,
2x GbE on layer 1; 2x DisplayPort, RJ-45 COM
(RS-232/422/485), PS/2 KB/MS, USB 2.0 ports, onboard
SATA connector and 2.5" SATA drive space on layer 2
ZL= Dual slot width with CFast socket, 1x DVI-I, 1x USB 3.0,
2x GbE on layer 1; 2x GbE, 1x DB-9 COM
(RS-232/422/485), 1x USB 2.0 on faceplate, 1x onboard
USB 2.0 port and 2.5" SATA drive space on layer 2
ZM= Dual slot width with CFast socket, 1x DVI-I, 1x USB 3.0,
2x GbE on layer 1; 1x 100-pin high density connector sup-
ports, 2x DVI-D, 2x USB 2.0, 2x COM (RS-232/422/485), 1x
KB/MS, audio and 2.5" SATA drive space on layer 2
ZP=Triple slot width with CFast socket, 1x DVI-I, 1x USB 3.0,
2x GbE on layer 1; 2x USB 2.0, COM (RS-232/422/485),
PS/2 KB/MS, Line-in, Line-out ports and 2.5" SATA drive
space on layer 2; PMC/XMC site on layer 3
ZS= Dual slot width with CFast socket, 1x DVI-I, 1x USB 3.0,
2x GbE on layer 1; PMC/XMC site on layer 2
cPCI-EX 3520 D/ 9850HL / 32G / S32
(A) (B) (C) (D) (E)
Preliminary

4 Introduction
(C) CPU Code
Z2276ML= 6-core Intel® Xeon® E-2276ML w/ ECC
Z9850HL = 6-core Intel® Core™ i7-9850HL
Z8400HL = 4-core Intel® Core™ i5-8400H
Z9100HL= 4-core Intel® Core™ i3-9100HL w/ ECC
(D) Memory Size Code
ZM8 = 8GB DDR3L-2666 soldered SDRAM
ZM16 = 2x 8GB DDR3L-2666 soldered SDRAM
ZM32 = 2x 16GB DDR4-2666 soldered SDRAM
(E) Storage Board Code
ZBlank = Default with CFast socket
ZMS = Equipped with mSATA socket
ZS32 = Onboard soldered 32GB SSD
RTMs
(A) Model Code
ZBlank = dual slot width, 50mm depth 3U RTM with 2x COM,
2x USB, 3x SATA, VGA, 2x GbE (switched from front CPU
blade)
ZT = dual slot width, 80mm depth 3U RTM with 2x COM, 2x
USB, 3x SATA, VGA, 2x GbE (independent from front CPU
blade)
cPCI- R3P00 T
(A)
Preliminary

Introduction 5
cPCI-3520
1.4 Package Contents
The cPCI-3520 is packaged with the following components. If any
of the following items are missing or damaged, retain the shipping
carton and packing material and contact the dealer for inspection.
Please obtain authorization before returning any product to
ADLINK. The packing contents of cPCI-3520 Series non-standard
configurations will vary depending on customer requests.
Processor Blade
XThe cPCI-3520 Series Processor Blade
ZCPU and memory specifications will differ depending on
options selected
ZThermal module is assembled on the board
XY-cable for PS/2 combo port (cPCI-3520D/P only)
X2.5" SATA drive installation kit (cPCI-3520D/G/L/M/P only)
XRJ-45 to DB-9 COM adapter cable (cPCI-3520G version only)
XDisplayPort to DVI adapter cable (cPCI-3520G version
only)l
Rear Transition Module
XcPCI-R3P00 or cPCI-R3P00T RTM
NOTE:
NOTE:
No I/O cables are included with the cPCI-3520M version.
NOTE:
NOTE:
The contents of non-standard cPCI-3520 configurations may
vary depending on the customer’s requirements.
Preliminary

6 Introduction
Blade Optional Accessories
X2.5” SATA drive installation kit (P/N 58-00176-0000)
XY-cable for PS/2 combo port (P/N 30-01016-2000)
XRJ-45 to DB-9 COM adapter cable (P/N 30-01020-0200)
XDisplayPort to DVI adapter cable (P/N 30-01120-0000)
XDisplayPort to VGA adapter cable (P/N 30-01119-0000)
XDisplayPort to HDMI adapter cable (P/N 30-01121-0000)
XUSB 3.0 Type A male-to-female extension cable
(P/N: 30-01175-0000)
XSCSI 100-pin IO cable: 2x DVI-D female, 2x DB9 male,
2x USB female, 2x PS/2 female, 2x audio jack
(available by request)
CAUTION:
This product must be protected from static discharge and phys-
ical shock. Never remove any of the components except at a
static-free workstation. Use the anti-static bag shipped with the
product when putting the board on a surface. Wear an
anti-static wrist strap properly grounded on one of the system's
ESD ground jacks when installing or servicing system compo-
nents.
Preliminary

Specifications 7
cPCI-3520
2 Specifications
2.1 cPCI-3520 Processor Blade Specifications
CompactPCI®
Standards • PICMG® 2.0 CompactPCI® Rev. 3.0 • PICMG® 2.9 System Management Rev. 1.0 (IPMI v1.5)
Mechanical • Standard 3U CompactPCI®
• Board size: 100mm x 160mm
• Single slot (4HP, 20.32mm); Dual slot (8HP, 40.64mm);
Triple slot (12HP, 60.96 mm)
• CompactPCI® with HM type J1 connector, UHM type J2
connector
Processor • 6-core Intel® Xeon® E-2276ML Processor 2GHz,
4.2GHz Turbo, 12M cache, 25W
• 6-core Intel® Core™ i7-9850HL Processor 1.9GHz,
4.1GHz Turbo, 9M cache, 25W
• 4-core Intel® Core™ i5-8400H Processor 2.5GHz,
4.2GHz Turbo, 8M cache, 45W (35W by cTDP)
• 4-core Intel® Core™ i3-9100HL Processor 1.6GHz,
2.9GHz Turbo, 6M cache, 25W
• 2-core Intel® Celeron® G4930E Processor 2.4GHz,
2M cache, 35W
• Passive heatsink
Chipset • Mobile Intel® CM246 Chipset
Memory • Dual channel DDR4-2666 SDRAM ECC soldered, up to 32GB
• DRAM configuration 32GB/16GB/8GB
CompactPCI
Bus • PCI 32-bit 33/66MHz; 3.3V, 5V universal V(IO) • Supports operation in system slot as master or in peripheral
slot as standalone blade without connectivity to CompactPCI
bus (Satellite mode)
Gigabit
Ethernet • One PCIe x1 Intel® I219LM GbE PHY and three PCIe x1 Intel® Ethernet Controllers I210IT
• Two egress 10/100/1000BASE-T ports on faceplate, one
supporting Intel® AMT by I219LM
• Two egress 10/100/1000BASE-T ports routed to rear transition
module
• Two additional egress 10/100/1000BASE-T ports on faceplate
(cPCI-3520L and cPCI-3520T)
Table 2-1: cPCI-3520 Processor Blade Specifications
Preliminary

8 Specifications
Graphics • Integrated on Intel® Core™ processor
• DVI-I port on faceplate, VGA switchable to J2 (RTM) by BIOS
setting
• Analog monitor support up to QXGA 2048x1536 @75Hz,
32-bit
• Two DisplayPorts on faceplate with resolution up to
2560x1440 @60Hz (cPCI-3520G only)
• Up to three independent displays
USB Front:
• 4HP: 1x USB 3.1 Gen2 Type A port
• 8HP: Up to two USB 2.0 on riser card
• (cPCI-3520D/P: 1x USB 3.1 Gen2 + 2x USB 2.0)
• (cPCI-3520G: 1x USB 3.1 Gen2 + 1x USB 2.0)
• (cPCI-3520L: 1x USB 3.1 Gen2 + 1x USB 2.0)
Rear:
• Up to 3x USB2.0
Serial Ports Front:
• 4HP: no serial port
• 8HP: 1x RS-232/422/485
• One RS-232/422/485 serial port on 8HP faceplate
(cPCI-3520D/L/P: 1x DB-9 COM, cPCI-3520G: 1x RJ-45
COM)
• Additional RS-232 10-pin header on layer-2 board
(cPCI-3520G only)
Rear:
• 1x RS-232 to J2
PMC/XMC One 32-bit/66MHz PMC site or PCIe x1 XMC site if PMC/XMC
daughter board is installed
Audio Line-in/Line-out on faceplate by Realtek ALC262 High Definition
Audio codec (cPCI-3520D only)
GPIO 3x GPIO signals from chipset: GPP_E0, GPP_E1 and GPP_E2
TPM TPM 2.0
Storage
Interfaces1• CFast or mSATA socket on daughter board
• Optional onboard SSD on daughter board
• One SATA 6Gb/s direct connector for 2.5" SATA drive
(8HP/12HP version only)
BIOS • AMI® UEFI BIOS, SPI flash memory
OS
Compatibility • Microsoft Windows 10 IOT Enterprise 64-bit • VxWorks 7.0
• Other OS support upon request
Table 2-1: cPCI-3520 Processor Blade Specifications
Preliminary

Specifications 9
cPCI-3520
Environmental • Operating Temperature (with forced air flow)2:
Standard: -20°C to 70°C
Extreme temperature: -40°C to +85°C
• Storage Temperature: -50°C to 100°C
• Humidity: 95% @60°C non-condensing
• Shock: 20G peak-to-peak, 11ms duration, non-operating
•Vibration
3: 2Grms, 5-500Hz, each axis, operating (w/o hard
drive)
EMI •TBD
Faceplate I/O 4HP cPCI-3520
• 1x USB 3.0 ports
• 2x 10/100/1000BASE-T Ethernet ports
• 1x DVI-I port
8HP cPCI-3520D
• 1x USB 3.0 ports
• 2x 10/100/1000BASE-T Ethernet ports
• 1x DVI-I port
• 2x USB 2.0 ports
• DB-9 RS-232/422/485/485+ port
• PS/2 Keyboard/Mouse combo port
• Line-in and Line-out port
8HP cPCI-3520G
• 1x USB 3.0 ports
• 2x 10/100/1000BASE-T Ethernet ports
• 1x DVI-I port
• 2x DisplayPort
• 1x USB 2.0 ports
• RJ-45 RS-232/422/485 port
• PS/2 Keyboard/ Mouse combo port
8HP cPCI-3520L
• 1x USB 3.0 ports
• 1x DVI-I port
• 4x 10/100/1000BASE-T Ethernet ports
• 1x USB 2.0 ports
• DB-9 RS-232/422/485 port
8HP cPCI-3520M
• 1x USB 3.0 ports
• 1x DVI-I port
• 2x 10/100/1000BASE-T Ethernet ports
• 1x 100-pin connector supports 2x DVI-D, Line-in/Line-out,
2x USB 2.0, 2x RS-232/422/485 COM, 1x KB/MS
Table 2-1: cPCI-3520 Processor Blade Specifications
Preliminary

10 Specifications
1. The storage device limits the operational vibration tolerance. When
the application requires higher specification for anti-vibration, it is
recommended to use a flash storage device.
2. ADLINK-certified thermal design. The thermal performance is depen-
dent on the chassis cooling design. Sufficient forced air-flow is required.
Temperature limits of optional mass storage devices may also affect the
thermal specification.
Faceplate I/O
(cont’d) 8HP cPCI-3520S • 1x USB 3.0 ports
• 2x 10/100/1000BASE-T Ethernet ports
•1xDVI-Iport
• PMC/XMC site
•
12HP cPCI-3520P
• 1x USB 3.0 ports
• 2x 10/100/1000BASE-T Ethernet ports
•1xDVI-Iport
• 2x USB 2.0 ports
• DB-9 RS-232/422/485/485+ port
• PS/2 Keyboard/Mouse combo port
• Line-in and Line-out port
• PMC/XMC site
Table 2-1: cPCI-3520 Processor Blade Specifications
Preliminary