Advantech PCA-6114P7 Installation and operation manual

PCA-6114P7 Startup Manual 1
Before you begin installing your card, please make sure that
the following items have been shipped:
1. PCA-6114P7 startup manual 2002611472
2. 3-pin ATX connector cable 1700030500
3. Screw M4*6L (15 pcs) 1939000410
4. 2-year quality warranty card 2190000902
If any of these items are missing or damaged, please con-
tact your distributor or sales representative immediately.
Note: Acrobat Reader is required to view any PDF
file.Acrobat Reader can be downloaded at:
www.adobe.com/Products/acrobat/readstep2.
html (Acrobat is a trademark of Adobe)
Standard Functions
• PICMG 1.0 slots: PCA-6114P7 supports PICMG 1.0 CPU
boards
• ISA slots: Four ISA slots
• 32-bit PCI: Six 32 bit/33 MHz PCI slots
• PCI/ISA slot: One PCI/ISA slot
Mechanical and Environment
• Dimension: 335.01 mm x 259.99 mm
• Power supply voltage: +12 V, +5 V, -12 V, -5 V, +3.3 V,
+5 VSB
• Power requirements: Refer to the CPU board, add-on
card, and peripherals
• Operating temperature: 0 ~ 60° C
• Weight: 0.87 kg
PCA-6114P7 Backplane: 14-slot BP for 15-slot Chassis, 4 ISA, 6
PCI, 3 PICMG, 1 ISA/PCI
Startup Manual
The board has a number of jumpers that allow you to con-
figure your system to suit your application. The table below
lists the function of each of the jumpers and connectors.
Jumpers and Connectors
Connectors
Label Function
PICMG1, PICMG2,
PICMG3 PICMG1.0 CPU board slot
ISA1, ISA4, ISA6~ISA8 16-bit ISA bus connector
ISA2, ISA3, ISA5 PICMG connector (ISA slot in
PICMG1, PICMG2, PICMG3)
PPCI1~PPCI3 32 bit / 33MHz PCI slot
SPCI4~SPCI7 32 bit / 33MHz PCI slot
VKB1, VKB3 Keyboard-Out, from CPU card
K/B connector
HKB2 Keyboard-in, 5-pin external
K/B connector
VAT 1 AT power connector
VBTX1 ATX power connector
HBIG1 Big 4-pin power connector
HCN1 PS-On, to CPU card for ATX
power signal
HCN2 Alarm board power connector
HCN3 +5V and +12V fan connector
Jumpers
Label Function
HCN1 ATX/AT Mode Selection
AT Mode
Remove default jumper
and connect 3-pin ATX
connector cable
ATX Mode
J1 PCI Bridge Voltage Selection
Setting 5V voltage to PCI slot
(default)
123
3 6 9
1 4 7
Specications
Packing List
For more information on this and other Advantech
products, please visit our website at:
http://www.advantech.com
http://www.advantech.com/eplatform
For technical support and service, please visit our
support website at:
http://support.advantech.com
This manual is for the PCA-6114P7 Series.
Part No. 2002611472
Printed in China
3rd Edition
May 2014
Jumpers and Connectors

2 PCA-6114P7 Startup Manual
Jumpers and Connectors
Setting 3.3V voltage to PCI
slot
VBTX1
Pin Name
1 3.3V
2 3.3V
3 GND
4 5V
5 GND
6 5V
7 GND
8 Power OK
9 5VSB
10 12V
11 12V
12 3.3V
13 3.3V
14 -12V
15 GND
16 PSON
17 GND
18 GND
19 GND
20 N/C
21 5V
22 5V
23 5V
24 GND
HBIG1
Pin Name
1 12V
2 GND
3 GND
4 5V
VKB1, VKB3
Pin Name
3 6 9
1 4 7
1 KBCLK
2 KBDAT
3 MSDAT
4 KB_GND
5 KB_VCC
6 MSCLK
VAT1
Pin Name
1 N/C
2 5V
3 12V
4 -12V
5 GND
6 GND
7 GND
8 GND
9 -5V
10 5V
11 5V
12 5V
HCN1
Pin Name
1 PSON
2 GND
3 5VSB
HCN2
Pin Name
1 5VSB
2 GND
3 GND
4 -5V
5 5V
6 +3.3V
7 -12V
8 12V
HCN3
Pin Name
1 12V
2 GND

PCA-6114P7 Startup Manual 3
3 5V
HKB2
Pin Name
1 KBCLK
2 KBDAT
3MSDAT
4 KB_GND
5 KB_VCC
6 MSCLK
Jumpers and Connectors
PCI
Slot IDSEL
PCI interrupt pin route
INTA INTB INTC INDTD
PPCI1 AD31 INTB INTC INTD INTA
PPCI2 AD30 INTC INTD INTA INTB
PPCI3 AD29 INTD INTA INTB INTC
SPCI1 SAD20 INTA INTB INTC INTD
SPCI2 SAD21 INTB INTC INTD INTA
SPCI3 SAD22 INTC INTD INTA INTB
SPCI4 SAD23 INTD INTA INTB INTC
Board Diagram
PCI Routing Tables

4 PCA-6114P7 Startup Manual
Locating Connectors & Jumpers
Note: When a PCI card and ISA card are inserted in PPCI1 and ISA1, those cards may conflict with each other.
SPCI4
SPCI3
SPCI2
SPCI1
PPCI3
PPCI2
PPCI1
ISA1
ISA2ISA3ISA4ISA5ISA6ISA7ISA8
VKB1
VKB3
VBTX1
VAT1
HBIG1
PICMG1
PICMG2
PICMG3
HKB2
HCN2
HCN3 HCN1
J1

PCA-6114P7 Startup Manual 5
Board Dimensions