Advantech AIR-200 User manual

User Manual
AIR-200
Rugged AI Fanless System

AIR-200 User Manual ii
Attention!
This package contains a hard-copy user manual in Chinese for China CCC certifica-
tion purpose, Please download the latest English user manual and drivers on web-
site:
http://www.advantech.com/products/65f20c25-f6ef-4ab5-be3c-b7dfa7a833b3/air-
200/mod_8f0cc938-4cfa-4375-a108-6a8e982a0365
Please disregard the printed Chinese copy of the user manual if the product is not to
be sold and/or installed in China.
申請商：研華股份有限公司
地 址：台北市內湖區瑞光路 26 巷 20 弄 1 號
電 話：02-27927818

iii AIR-200 User Manual
Copyright
The documentation and the software included with this product are copyrighted 2020
by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right
to make improvements in the products described in this manual at any time without
notice. No part of this manual may be reproduced, copied, translated, or transmitted
in any form or by any means without the prior written permission of Advantech Co.,
Ltd. The information provided in this manual is intended to be accurate and reliable.
However, Advantech Co., Ltd. assumes no responsibility for its use, nor for any
infringements of the rights of third parties that may result from its use.
Acknowledgements
Intel®and Pentium®are trademarks of Intel Corporation.
Microsoft Windows®is a registered trademark of Microsoft Corp.
All other product names or trademarks are properties of their respective owners.
Product Warranty (2 years)
Advantech warrants the original purchaser that each of its products will be free from
defects in materials and workmanship for two years from the date of purchase.
This warranty does not apply to any products that have been repaired or altered by
persons other than repair personnel authorized by Advantech, or products that have
been subject to misuse, abuse, accident, or improper installation. Advantech
assumes no liability under the terms of this warranty as a consequence of such
events.
Because of Advantech’s high quality-control standards and rigorous testing, most
customers never need to use our repair service. If an Advantech product is defective,
it will be repaired or replaced free of charge during the warranty period. For out-of-
warranty repairs, customers will be billed according to the cost of replacement mate-
rials, service time, and freight. Please consult your dealer for more details.
If you believe your product to be defective, follow the steps outlined below.
1. Collect all the information about the problem encountered. (For example, CPU
speed, Advantech products used, other hardware and software used, etc.) Note
anything abnormal and list any onscreen messages displayed when the prob-
lem occurs.
2. Call your dealer and describe the problem. Please have your manual, product,
and any helpful information readily available.
3. If your product is diagnosed as defective, obtain a return merchandize authori-
zation (RMA) number from your dealer. This allows us to process your return
more quickly.
4. Carefully pack the defective product, a completed Repair and Replacement
Order Card, and a proof of purchase date (such as a photocopy of your sales
receipt) into a shippable container. Products returned without a proof of pur-
chase date are not eligible for warranty service.
5. Write the RMA number clearly on the outside of the package and ship the pack-
age prepaid to your dealer.
Part No. 2006R20000 Edition 1
Printed in Taiwan May 2020

AIR-200 User Manual iv
Declaration of Conformity
CE
This product has passed the CE test for environmental specifications. Test conditions
for passing include the equipment being operated within an industrial enclosure. In
order to protect the product from damage caused by electrostatic discharge (ESD) or
EMI leakage, we strongly recommend the use of CE-compliant industrial enclosure
products.
FCC Class A
This equipment has been tested and found to comply with the limits for a Class A dig-
ital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-
vide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Opera-
tion of this equipment in a residential area is likely to cause harmful interference. In
this event, users are required to correct the interference at their own expense.
Technical Support and Assistance
1. Visit the Advantech website at www.advantech.com/support to obtain the latest
product information.
2. Contact your distributor, sales representative, or Advantech's customer service
center for technical support if you need additional assistance. Please have the
following information ready before calling:
–Product name and serial number
–Description of your peripheral attachments
–Description of your software (operating system, version, application software,
etc.)
–A complete description of the problem
–The exact wording of any error messages
Ordering Information
P/N Description
AIR-200-S92A1 Intel Core i5-6442EQ 1.9GHz, Dual HDMI output

v AIR-200 User Manual
Warnings, Cautions, and Notes
Packing List
Before system installation, check that the items listed below are included and in good
condition. If any item does not accord with the list, contact your dealer immediately.
1 x AIR-200 unit
1 x Hard copy user manual (Simplified Chinese)
1 x 6 pin remote control block
1 x 5 pin power block
2 x Wall mounting brackets
Safety Instructions
1. Read these safety instructions carefully.
2. Retain this user manual for future reference.
3. Disconnect the equipment from all power outlets before cleaning. Use only a
damp cloth for cleaning. Do not use liquid or spray detergents.
4. For pluggable equipment, the power outlet socket must be located near the
equipment and easily accessible.
5. Protect the equipment from humidity.
6. Place the equipment on a reliable surface during installation. Dropping or letting
the equipment fall may cause damage.
7. Do not leave this equipment in an environment unconditioned where the storage
temperature under -40° C or above 85° C, it may damage the equipment. Oper-
ating temperature is -20° C to 60° C.
8. The openings on the enclosure are for air convection. Protect the equipment
from overheating. Do not cover the openings.
9. Ensure that the voltage of the power source is correct before connecting the
equipment to a power outlet.
10. Position the power cord away from high-traffic areas. Do not place anything over
the power cord.
Warning! Warnings indicate conditions that if not observed can cause personal
injury!
Caution! Cautions are included to help prevent hardware damage and data
losses. For example,
“Batteries are at risk of exploding if incorrectly installed. Do not attempt
to recharge, force open, or heat the battery. Replace the battery only
with the same or equivalent type as recommended by the manufacturer.
Discard used batteries according to the manufacturer's instructions.”
Note! Notes provide additional optional information.

AIR-200 User Manual vi
11. All cautions and warnings on the equipment should be noted.
12. If the equipment is not used for a long time, disconnect it from the power source
to avoid damage from transient overvoltage.
13. Never pour liquid into an opening. This may cause fire or electrical shock.
14. Never open the equipment. For safety reasons, the equipment should be
opened only by qualified service personnel.
15. If any of the following occurs, have the equipment checked by service person-
nel:
The power cord or plug is damaged
Liquid has penetrated into the equipment
The equipment has been exposed to moisture
The equipment is malfunctioning, or does not operate according to the user
manual.
The equipment has been dropped and damaged
The equipment shows obvious signs of breakage
16. CAUTION: Batteries are at risk of exploding if incorrectly replaced. Replace only
with the same or equivalent type as recommended by the manufacturer. Discard
used batteries according to the manufacturer’s instructions.
ATTENTION: L'ordinateur est muni d'un circuit en temps reél de l'horloge ali-
mentée par betterie. ll ya un danger d'explosion si la pile est replacée de façon
incorrecte. Remplacez uniquement par un type identique ou équivalent recom-
mandé par le fabricant. Jetez les piles usagées selon les instructions du fabri-
cant.
17. CAUTION: Always completely disconnect the power cord from your chassis
whenever you work with the hardware. Do not make connections while the
power is on. Sensitive electronic components can be damaged by sudden
power surges.
ATTENTION:débranchez toujours complètement le cordon d'alimentation de
votre châssis chaque fois que vous travaillez avec le matériel. Ne faites pas de
connexions pendant que l'appareil est sous tension. Les composants électro-
niques sensibles peuvent être endommagés par des surtensions soudaines.
18. CAUTION: Always ground yourself to remove any static charge before touching
the motherboard, backplane, or add-on cards. Modern electronic devices are
very sensitive to static electric charges. As a safety precaution, use a grounding
wrist strap at all times. Place all electronic components on a static-dissipative
surface or in a static-shielded bag when they are not in the chassis.
ATTENTION: Toujours mettre à la terre pour éliminer toute charge statique
avant de toucher la carte mère, le fond de panier ou les cartes d'extension.
Les appareils électroniques modernes sont très sensibles aux charges élec-
triques statiques. Par mesure de sécurité, utilisez un bracelet antistatique à tout
moment. Placez tous les composants électroniques sur un support antistatique
surface ou dans un sac antistatique lorsqu'ils ne sont pas dans le châssis.
19. CAUTION: Any unverified component could cause unexpected damage. To
ensure the correct installation, please always use the components (ex. screws)
provided with the accessory box.
ATTENTION: Tout composant non vérifiée pourrait causer des dommages inat-
tendu. Pour garantir une installation correcte, s'il vous plaît utilisez toujours les
composants(vis ex.) fournies avec la boîte d'accessories.

vii AIR-200 User Manual
Contents
Chapter 1 General Introduction ...........................1
1.1 Introduction ............................................................................................... 2
1.2 Features .................................................................................................... 2
1.3 Hardware Specifications ........................................................................... 3
1.4 Mechanical Specifications......................................................................... 4
1.4.1 Dimensions ................................................................................... 4
Figure 1.1 AIR-200-S92A1 Mechanical Dimensions ................... 4
Chapter 2 Hardware Installation ..........................5
2.1 Overview of Hardware Installation & Upgrading ....................................... 6
2.2 Memory installation ................................................................................... 6
2.3 Storage installation.................................................................................... 7
2.3.1 2.5" SATA drive installation .......................................................... 7
2.3.2 mSATA Installation ....................................................................... 7
2.4 Optional MiniPCIe and M.2 Module Installation ........................................ 8
Chapter 3 BIOS Settings.......................................9
3.1 BIOS Introduction.................................................................................... 10
3.2 Enter Setup ............................................................................................. 10
3.2.1 Main Setup.................................................................................. 11
Figure 3.1 Main setup screen .................................................... 11
3.2.2 Advanced BIOS Setup ................................................................ 12
Figure 3.2 Advanced BIOS setup screen .................................. 12
3.2.3 Chipset........................................................................................ 40
3.2.4 Security ....................................................................................... 51
3.2.5 Boot Settings............................................................................... 52
3.2.6 Save & Exit ................................................................................. 53
Chapter 4 Jumper and Switch Settings ............55
4.1 Setting Jumpers and Switches................................................................ 56
4.2 Jumper location....................................................................................... 56
4.3 Jumper List.............................................................................................. 57
4.3.1 I/O Board..................................................................................... 57
4.4 Jumper Setting ........................................................................................ 57
4.4.1 BIOS Selection (J1&J2) .............................................................. 57
4.4.2 Clear CMOS (CMOS1) ............................................................... 57
4.4.3 MiniPCIe Slot1 Power Setting (SW1).......................................... 57
4.4.4 MiniPCIe Slot2 Power Setting (SW2).......................................... 57
Appendix A Pin Assignments ...............................59
A.1 I/O Connector Location ........................................................................... 60
A.1.1 AIR-200-S92A1 I/O Overview ..................................................... 60
A.2 I/O Connector Pin-Definition ................................................................... 60
A.2.1 VGA ............................................................................................ 60
A.2.2 HDMI........................................................................................... 61
A.2.3 USB............................................................................................. 61
A.2.4 Ethernet ...................................................................................... 62

AIR-200 User Manual viii
A.2.5 DIO ............................................................................................. 62
A.2.6 COM ........................................................................................... 63
A.2.7 Audio........................................................................................... 63
A.2.8 Remote Control........................................................................... 63
A.2.9 DC Input...................................................................................... 64
A.2.10 DC Output (12Vdc/1.5A)............................................................. 64
A.2.11 External SIM Slots ...................................................................... 64
A.2.12 LED Indicator .............................................................................. 64
A.2.13 Power On/Off Button................................................................... 64

Chapter 1
1General Introduction
This chapter gives background
information on AIR-200 series.

AIR-200 User Manual 2
1.1 Introduction
AIR-200 is an industrial grade quad core mobile device for edge AI inference solu-
tion.
It also supports Full-HD NVR solution and is fully integrated with certified hardware
and intelligent management software. AIR-200 provides diverse communication
(ex:GPS/G-sensor/WLAN/WWAN/CANBus) for excellent connectivity, it has great
expansion capability and comes with integrated software for manageability and secu-
rity.
AIR-200-A92A1 I/O Overview
1.2 Features
Intel® Core i5-6442EQ 1.9GHz
Intel® Movidius™ Myriad™ X VPU MA2485 x 2 Built-in
Intel® OpenVINO™ toolkit supported
Support TPM2.0
Extreme graphic performance, support up to 1080p 120fps video
encode&decode
Isolated 12~24Vdc wide-range power input
Diversity communication extensible, ex.WLAN, WWAN
Anti-vibration & shock proof, certified by MIL-STD-810G
Certfied for general standard, CE, FCC, CB, UL, CCC, and BSMI
Integrated with Edge AI Suite

3 AIR-200 User Manual
Chapter 1 General Introduction
1.3 Hardware Specifications
CPU: Intel® Core i5-6442EQ 1.9GHz
System Chipset: Intel® QM170
BIOS: AMI uEFI 64 Mbit Flash BIOS
System Memory: 2 x DDR4 SO-DIMM sockets, support DDR4 2133 MHz up to
32 GB (Max. 16GB per each SO-DIMM socket)
Graphics Controller: Intel® Gen 9
Storage:
–2.5" SATA: 1 x removable 2.5" drive bay (Max 9.5 mm height)
–mSATA: 1x full size mSATA storage
Watchdog Timer: Supported by Advantech SUSIAccess API
I/O Interface:
–COM: 3 x RS-232/422/485
–USB: 3 x USB 3.0
–Audio: 1x Line-in / Line-Out / Mic-in
Ethernet: 2 x Giga LAN 10/100/1000 Mbps
Digital I/O: 4 x DI & 4 x DO w/ 1.5KV isolation
–Input Voltage: 0 to 30 VDC at 25 Hz,
–Output Current: Max. 500 mA per channel
–On-state Voltage: 24 VDC nominal, open collector to 30 VDC
LED indicator: 1xPower LED, 1xStorage LED
Display output::
–1x VGA up to 1920 x 1200 @ 60Hz
–1x lockable HDMI, up to 2K @ 60 Hz
Power Requirement:
–Power type: ATX
–Intelligent Vehicle Power Ignition Management: Selectable boot-up & shut-
down voltage, on/off delay time
–Input voltage: 12~24 VDC
–Isolation: 1.5KV
Expansion slot:
–1 x full size mini PCIe slot, support SATA/USB2.0/USB3.0/PCIe with accessi-
ble SIM socket
–1 x M.2 2230 E Key, support USB2.0/PCIe
Enclosure: Ruggedized aluminum housing.
Operating temperature: With extended temperature peripherals:-20 ~ 60 °C
with 0.7m/s air flow
Storage temperature: -40 ~ 85° C
Vibration / Shock: With mSATA/SSD: IEC 60721-3-5 Class 5M3, MIL-STD-
810G Method 514.6/516.6
Certifications:
–EMC: CE/FCC Class B, CCC, BSMI
–Safety: UL, CCC, BSMI

AIR-200 User Manual 4
1.4 Mechanical Specifications
1.4.1 Dimensions
260 x 160.2 x 86.8 mm
Figure 1.1 AIR-200-S92A1 Mechanical Dimensions

Chapter 2
2Hardware Installation
This chapter introduces the instal-
lation of AIR-200 Hardware.

AIR-200 User Manual 6
2.1 Overview of Hardware Installation & Upgrading
2.2 Memory installation
Remove 4 screws from top case to install memory on the top side of the board
Warning! Do not remove the ruggedized aluminum covers until verifying that no
power is flowing within the computer. Power must be switched off and
the power cord must be unplugged. Take care in order to avoid injury or
damage to the equipment.

7 AIR-200 User Manual
Chapter 2 Hardware Installation
2.3 Storage installation
2.3.1 2.5" SATA drive installation
2.3.2 mSATA Installation
1. Remove bottom cover 4 screws on the bottom side and 4 screws on both sides.
2. Insert a full size mSATA storage in the place marked

AIR-200 User Manual 8
2.4 Optional MiniPCIe and M.2 Module Installation
Insert suitable modules on MiniPCie or M.2 slots.
M.2
2230 E key
Full Size MiniPCIe slot,
SATA/USB2.0&3.0/PCI

Chapter 3
3BIOS Settings
This chapter explains the BIOS
configuration processes

AIR-200 User Manual 10
3.1 BIOS Introduction
AIR-200 BIOS has been stored into a flash ROM which is inserted into a BIOS socket
on the board. With the BIOS Setup program, users can modify BIOS settings and
control various system features. This chapter describes the basic navigation of the
AIR-200 BIOS setup screens. Advantech will have revisions for product optimization
so customers can re-flash the latest BIOS through the AFU utility. Please contact
Advantech sales or FAE for more details.
3.2 Enter Setup
Entering the BIOS To enter the BIOS setup screens, follow the steps below: 1. Power
on the system. 2. Press the Delete or Esc key on your keyboard when you see the
following text prompt: Press Delete or Esc to enter setup. 3. After you press the
Delete key, the main BIOS setup menu displays. You can access the other BIOS
function settings.

11 AIR-200 User Manual
Chapter 3 BIOS Settings
3.2.1 Main Setup
When users first enter the BIOS Setup Utility, they will enter the Main setup screen.
You can always return to the Main setup screen by selecting the Main tab. The Main
BIOS Setup screen is shown below.
Figure 3.1 Main setup screen
Feature Option Description
System Language English Choose the BIOS language
System Date mm/dd/yyyy
Set the system date. Use Tab to switch
between Date elements. Use + / - or
numbers to change the value.
System Time hh:mm:ss
Set the system time. Use Tab to switch
between Date elements. Use + / - or
numbers to change the value.

AIR-200 User Manual 12
3.2.2 Advanced BIOS Setup
Select the Advanced tab from the AIR-200 setup screen to enter the Advanced BIOS
Setup screen. Users can select any item in the left frame of the screen, such as CPU
Configuration, to go to the sub menu for that item. Users can display an Advanced
BIOS Setup option by highlighting it using the <Arrow> keys. All Advanced BIOS
Setup options are described in this section. The Advanced BIOS Setup screens are
shown below. The sub menus are described on the following pages.
Figure 3.2 Advanced BIOS setup screen
Feature Option Description
PCIE_USB3_P1_STRP PCIe P2
USB3 P8 PCIE_USB3 Combe Port 1 Strap
PCIE_USB3_P0_STRP PCIe P1
USB3 P7 PCIE/USB3 Combe Port 0 Strap