AGFA DRY 1.4 User manual

DRY 1.4, DRY 2.4
5366/510
5366/500
User Manual
3631B EN 20210601 1655

Contents
Legal Notice ..........................................................................5
About the safety notices in this document .............................. 6
DRY 1.4, DRY 2.4 ...................................................................7
Scope .........................................................................8
Intended use ..............................................................9
Available Software versions ..................................... 10
Film types ................................................................ 11
Labeling the input trays ................................11
Specifications .......................................................... 13
Product Complaints ................................................. 17
Disclaimer ................................................................18
Introduction ........................................................................ 19
Intended user .......................................................... 20
Features ...................................................................21
Network features ......................................... 23
Software license information ....................... 23
Options and accessories ............................... 23
Equipment Classification ......................................... 24
Safety precautions ................................................... 25
Labels .......................................................... 27
Transport after installation .......................... 30
Environmental protection ............................ 32
Restriction of the Use of Certain Hazardous
Substances (RoHS) ...................................... 33
Security precautions ................................................ 34
Installation .............................................................. 35
Training ...................................................................36
Compliance ..............................................................37
General ........................................................38
Safety .......................................................... 38
Electromagnetic Compatibility .....................38
Seismic (earthquake) requirements ............. 39
Connectivity ............................................................ 40
Safety compliance ........................................40
Labels ...................................................................... 41
Viewing the System info area on a film .........41
Power cord regulations ............................................ 43
Patient data security ................................................ 44
Storage media ..............................................45
Node authentication, certificates and Certification
Authority ..................................................... 46
Requirements on the operating environment ...
47
Operating modes ..................................................... 49
Control modes (local and remote) ................50
ii | DRY 1.4, DRY 2.4 | Contents
3631B EN 20210601 1655

Operator mode .............................................51
Key-operator mode ...................................... 52
Service mode ............................................... 53
Specialist mode ............................................54
Administrator mode .....................................55
The local user interface ............................................56
Messages ..................................................... 58
The status indicator LED .............................. 59
The control buttons ......................................60
Rear panel ....................................................61
Audio signals ............................................... 62
The keypad .................................................. 63
The display .................................................. 65
Switching on the printer .......................................... 68
Cooling down the printer .........................................70
Switching off the printer ..........................................71
Basic Operation (operator mode) .........................................72
Managing the print queue ........................................73
Checking the print queue ............................. 74
The local print queue screen ........................ 75
Pausing the print queue ........................................... 76
Viewing the film count info ......................................77
Viewing the printer status ........................................78
Deleting print jobs ................................................... 79
Changing the film format of the trays .......................80
Loading films ...........................................................83
When the printer is printing or calculating and an
input tray is empty ....................................... 84
When the printer is in the ready state and an input
tray is empty ................................................ 85
Film loading procedure ................................86
Checking the correct position of a film in the input
tray ..............................................................90
Advanced Operation (key-operator mode) ........................... 91
The menu structure ................................................. 92
Quality Control ........................................................93
Establishing the reference values and verifying
image quality ............................................... 94
QC test image .............................................. 95
Establishing the daily operating reference density
levels ........................................................... 97
Establishing the image geometry reference values
........................................................................100
Verifying Acceptable Spatial Resolution, Artifact
Levels and Low Contrast Visibility .............. 101
Performing quality control (QC) tests .........102
Preventive maintenance schedule ...................................... 106
Safety guidelines ....................................................107
Recurrent safety tests ............................................. 107
Cleaning and disinfection .......................................108
DRY 1.4, DRY 2.4 | Contents | iii
3631B EN 20210601 1655

Cleaning the print head ..........................................109
Calibrating the touchscreen ................................... 112
Remarks for HF-emission and immunity ............................115
Immunity to RF wireless communication equipment ....
121
Precautions on EMC ...............................................122
Cables, transducers and accessories ....................... 123
Quality Control Charts .......................................................124
Plug & Play Installation Manual ......................................... 129
Contents of the packages ....................................... 130
Remove the packing materials ................................131
Remove the printer from the pallet .........................133
Unpack the accessories .......................................... 135
Environment specifications .................................... 136
Remove the transport protections .......................... 137
Connect the cables ................................................. 142
Verify film position tabs ......................................... 143
Load film in the input trays .................................... 145
Startup the printer ................................................. 147
Configure network settings .................................... 148
iv | DRY 1.4, DRY 2.4 | Contents
3631B EN 20210601 1655

Legal Notice
Agfa NV, Septestraat 27, B-2640 Mortsel - Belgium
For more information on Agfa products, please visit www.agfa.com.
Agfa and the Agfa rhombus are trademarks of Agfa-Gevaert N.V., Belgium or
its affiliates. Drystar is a trademark of Agfa NV, Belgium or one of its affiliates.
All other trademarks are held by their respective owners and are used in an
editorial fashion with no intention of infringement.
Agfa NV makes no warranties or representation, expressed or implied, with
respect to the accuracy, completeness or usefulness of the information
contained in this document and specifically disclaims warranties of suitability
for any particular purpose. Products and services may not be available for
your local area. Please contact your local sales representative for availability
information. Agfa NV diligently strives to provide as accurate information as
possible, but shall not be responsible for any typographical error. Agfa NV
shall under no circumstances be liable for any damage arising from the use or
inability to use any information, apparatus, method or process disclosed in
this document. Agfa NV reserves the right to make changes to this document
without prior notice. The original version of this document is in English.
Copyright 2021 Agfa NV
All rights reserved.
Published by Agfa NV
B-2640 Mortsel - Belgium.
No part of this document may be reproduced, copied, adapted or transmitted
in any form or by any means without the written permission of Agfa NV
DRY 1.4, DRY 2.4 | Legal Notice | 5
3631B EN 20210601 1655

About the safety notices in this document
The following samples show how warnings, cautions, instructions and notes
appear in this document. The text explains their intended use.
DANGER:
A danger safety notice indicates a hazardous situation of direct,
immediate danger for a potential serious injury to a user,
engineer, patient or any other person.
WARNING:
A warning safety notice indicates a hazardous situation which
can lead to a potential serious injury to a user, engineer, patient
or any other person.
CAUTION:
A caution safety notice indicates a hazardous situation which
can lead to a potential minor injury to a user, engineer, patient
or any other person.
An instruction is a direction which, if it is not followed, can
cause damage to the equipment described in this manual or any
other equipment or goods and can cause environmental
pollution.
A prohibition is a direction which, if it is not followed, can cause
damage to the equipment described in this manual or any other
equipment or goods and can cause environmental pollution.
Note: Notes provide advice and highlight unusual points. A note is
not intended as an instruction.
6 | DRY 1.4, DRY 2.4 | About the safety notices in this document
3631B EN 20210601 1655

DRY 1.4, DRY 2.4
Topics:
•Scope
•Intended use
•Available Software versions
•Film types
•Specifications
•Product Complaints
•Disclaimer
DRY 1.4, DRY 2.4 | DRY 1.4, DRY 2.4 | 7
3631B EN 20210601 1655

Scope
The user manual contains general safety instructions, system information and
instructions for performing a basic workflow. Refer to the reference manual of
the printer for information for the advanced operation of the printer.
This manual appies to two printer models: DRY 1.4 and DRY 2.4. The further
chapters describe DRY 2.4. All information applies equally to DRY 1.4, apart
from the differences in this table:
Table 1: Difference between the two printer models
DRY 1.4 DRY 2.4
One input tray.
Only the upper tray is available. Functionality of the lower
tray described in the manual equally applies to the upper
tray.
Two input
trays.
Figure 1: Example of the type label
Type label
8 | DRY 1.4, DRY 2.4 | DRY 1.4, DRY 2.4
3631B EN 20210601 1655

Intended use
The DRY 1.4 and DRY 2.4 are dry digital tabletop printers for producing
medical diagnostic images. They can print multiple formats (8x10 inch, 10x12
inch, 11x14 inch, 14x14 inch and 14x17 inch) of blue-based (CDF-B) film and
offers crisp, dense grayscale images. The DRY 1.4 and DRY 2.4 can be used for
general radiography only. They cannot be used for the mammography
application. The DRY 1.4 and DRY 2.4 are designed for highthroughput and
for use as a central printer.
DRY 1.4, DRY 2.4 | DRY 1.4, DRY 2.4 | 9
3631B EN 20210601 1655

Available Software versions
The table below lists the available software versions and the type of printer
they require:
Software
version
(SW)
Printer
1.8.x supports Drystar 5302
1.9.x supports Drystar 5302 (RoHS compliant)
2.0 supports both Drystar 5302 & Drystar AXYS
2.1 and 2.2 support new PCBs on Drystar 5302 & Drystar Axys
2.3 maintenance software version
3.x supporting first Private label printer
4.0 support of additional printer models
5.0 • support for single tray models
• Supports Sata Dom
• Supports Spare-Parts without E-lables
5.1 support of additional printer models
6.0 required for devices with serial number higher than 100000
6.1 is a maintenance software + supports DRY IMAGER
6.1.x maintenance software
6.2 is needed for new Devnix PCB index 16 and higher
6.2.1 maintenance software
6.2.2 required for for devices with serial numbers higher than
751001 and for devices with serial numbers higher than
151001 and lower than 700000
10 | DRY 1.4, DRY 2.4 | DRY 1.4, DRY 2.4
3631B EN 20210601 1655

Film types
Film
type
Film base Application Film sizes Average optical
density
(X-Rite 310 densi-
tometer)
CDF-B blue-trans-
parent
General Radi-
ography
8x10”, 10x12”,
11x14”,
14x14”, and
14x17”
3.2
The printer has 2 input trays. Both trays can handle all listed film types and
formats.
When a new film pack is loaded, the Film Identification tag is read and the
printer settings are automatically adjusted.
The Key-operator can overrule the film settings for the input tray.
Labeling the input trays
Note: If you want to change the film format, the tray
configuration must be modified.
Appropriate labels have been applied on the input tray(s) by the service
personnel at installation of the printer, indicating the type of new film to be
loaded when the tray is empty.
DRY 1.4, DRY 2.4 | DRY 1.4, DRY 2.4 | 11
3631B EN 20210601 1655

12 | DRY 1.4, DRY 2.4 | DRY 1.4, DRY 2.4
3631B EN 20210601 1655

Specifications
Product description
Type of product Printer
Commercial name DRY 1.4
DRY 2.4
Original seller/manufacturer Agfa NV
Labelling
CE-marking
Dimensions
Dimensions (approx. values in cm) • Unpacked: width 72.8, length
71.5, height 67.6
• Packed: width 89, length 100,
height 80
Weight • Unpacked: approx. 90 kg
• Packed: approx. 128 kg
RAM memory 1 Gb
Internal mass storage media Approx. 12 Gb
External mass storage media USB flash drive
Electrical connection
Rated voltage 100-120 V; 220-240 V AC
Rated current 4 A (100-120 V); 2 A (220-240 V)
No external main fuses
Mains frequency 50-60 Hz
Network connectivity
Ethernet / connectors RJ45 twisted pair for 10/100/1000
Base-TX
Network protocols (TCP/IP serv-
ices)
HTTP
DRY 1.4, DRY 2.4 | DRY 1.4, DRY 2.4 | 13
3631B EN 20210601 1655

Image formats DICOM (Default)
TIFF
Postscript Not available
Power consumption - heat dissipation
During operation 250 W - 900 kJ/h
In stand-by 70 W - 252 kJ/h
Peak power (absolute max. rating) 530 W - 1908 kJ/h
Protection against
Electrical shocks Class 1 (grounded)
Ingress of water IPXØ
Environmental conditions (operation)
Room temperature Between +15°C and +35°C
Relative humidity Between 20% and 75%
Note: Films may not become wet!
Atmospheric pressure 70 kPa - 106 kPa
Related altitude on site 3000 m to 0 m
Environmental storage conditions
Climate conditions for storage are in accordance with EN60721-3-1-class 1K4.
Room temperature Between -25°C and 55°C (storage)
Relative humidity Between 10% and 100%
Absolute humidity Between 0.1 g/m3 and 35 g/m3
Rate of change of temperature 1°C/min
Atmospheric pressure 70 kPa - 106 kPa
Environmental transport conditions
Climate conditions for transport are in accordance with EN60721-3-2-class
2K4.
Temperature Between -40°C and 70°C (transport)
14 | DRY 1.4, DRY 2.4 | DRY 1.4, DRY 2.4
3631B EN 20210601 1655

Relative humidity not combined
with rapid temperature changes
95% at +45°C
Noise emission (method of measurement in accordance with DIN
45635 part 19)
During operation Max. 64 dBA
In stand-by Max. 54 dBA
Total acoustic A-weighted noise power
During operation 62 dB ( = 6.4Bel = 6.4B)
In stand-by 53 dB ( = 5.3Bel = 5.3B)
Print technology
Direct thermal printing
Reliability
Estimated product life
(if regularly serviced and main-
tained according to Agfa instruc-
tions)
> 5 years
Service interventions Max. 2 interventions / 3 years
Earthquake (standard) Meets the CA requirements
Imaging Array - Diagnostic area
8x10” 8” dimensions 10” dimensions
pixels mm pixels mm
2376 188.65 3070 243.76
10x12” 10” dimensions 12” dimensions
pixels mm pixels mm
3070 243.76 3653 290.05
11x14” 11” dimensions 14” dimensions
pixels mm pixels mm
3348 265.83 4358 346.03
14x14” 14” dimensions 14” dimensions
DRY 1.4, DRY 2.4 | DRY 1.4, DRY 2.4 | 15
3631B EN 20210601 1655

pixels mm pixels mm
4358 346.03 4303 341.66
14x17” 14” dimensions 17” dimensions
pixels mm pixels mm
4358 346.03 5232 415.42
16 | DRY 1.4, DRY 2.4 | DRY 1.4, DRY 2.4
3631B EN 20210601 1655

Product Complaints
Any health care professional (for example a customer or a user) who has any
complaints or has experienced any dissatisfaction with the quality, durability,
reliability, safety, effectiveness, or performance of this product must notify
Agfa.
If, during the use of this device or as a result of its use, a serious incident has
occurred, please report it to the manufacturer and/or its authorised
representative and to your national authority.
Manufacturer address:
Agfa Service Support - local support addresses and phone numbers are listed
on www.agfa.com
Agfa - Septestraat 27, 2640 Mortsel, Belgium
Agfa - Fax [phone]
DRY 1.4, DRY 2.4 | DRY 1.4, DRY 2.4 | 17
3631B EN 20210601 1655

Disclaimer
Agfa assumes no liability for use of this document if any unauthorized
changes to the content or format have been made.
Every care has been taken to ensure the accuracy of the information in this
document. However, Agfa assumes no responsibility or liability for errors,
inaccuracies or omissions that may appear in this document. To improve
reliability, function or design Agfa reserves the right to change the product
without further notice. This manual is provided without warranty of any kind,
implied or expressed, including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose.
Note: In the United States, Federal law restricts this device on order
of a physician for prescription use only.
18 | DRY 1.4, DRY 2.4 | DRY 1.4, DRY 2.4
3631B EN 20210601 1655

Introduction
Topics:
•Intended user
•Features
•Equipment Classification
•Safety precautions
•Security precautions
•Installation
•Training
•Compliance
•Connectivity
•Labels
•Power cord regulations
•Patient data security
•Operating modes
•The local user interface
•Switching on the printer
•Cooling down the printer
•Switching off the printer
DRY 1.4, DRY 2.4 | Introduction | 19
3631B EN 20210601 1655

Intended user
This manual is written for trained users. Users are considered as the persons
who actually handle the equipment as well as the persons having authority
over the equipment. Before attempting to work with this equipment, the user
must read, understand, note and strictly observe all warnings, cautions and
safety markings on the equipment.
20 | DRY 1.4, DRY 2.4 | Introduction
3631B EN 20210601 1655