AGI Storm Professional 2017 Series User manual

Read this manual before using product. Failure to
follow instructions and safety precautions can
result in serious injury, death, or property
damage. Keep manual for future reference.
Part Number: 4400–90001
Revised: March 2020
Professional Series – 2017
Seed Treater
Operator’s Manual
Original Instructions

We strongly recommend that all personnel associated with this equipment be trained in the correct operational
and safety procedures required for this product. This product has been designed and constructed according to
general engineering standards, other local regulations may apply and must be followed by the operator. Use the
sign-off sheet below to record initial and periodic reviews of this manual with all such personnel.
Date Employee Signature Employer Signature

PROFESSIONAL SERIES – 2017 – SEED TREATER
4400–90001 3
CONTENTS
1. Introduction ............................................................................................................................................ 6
1.1 Serial Number Location............................................................................................................. 6
1.2 Intended Use ............................................................................................................................. 6
1.2.1 Misuse ........................................................................................................................ 7
2. Safety....................................................................................................................................................... 8
2.1 Safety Alert Symbol and Signal Words...................................................................................... 8
2.2 General Product Safety ............................................................................................................. 8
2.3 Rotating Flighting Safety ........................................................................................................... 9
2.4 Overhead Power Lines .............................................................................................................. 9
2.5 Cleated Conveyor Belt Safety.................................................................................................... 9
2.6 Upending ................................................................................................................................... 9
2.7 Seed Treatment Safety............................................................................................................ 10
2.8 Rotating Parts Safety............................................................................................................... 10
2.9 Work Area Safety .................................................................................................................... 10
2.10 Guards Safety ........................................................................................................................ 11
2.11 Raising and Lowering the Seed Treater ................................................................................ 11
2.12 Positioning the Seed Treater................................................................................................. 11
2.13 Towing the Seed Treater....................................................................................................... 12
2.14 Drives and Lockout Safety..................................................................................................... 12
2.14.1 Diesel Engine Safety ............................................................................................... 12
2.14.2 Electric Motor Safety.............................................................................................. 13
2.14.3 Hydraulic Power Safety .......................................................................................... 13
2.15 Tire Safety.............................................................................................................................. 14
2.16 Battery Safety ........................................................................................................................ 14
2.17 Personal Protective Equipment............................................................................................. 15
2.18 Safety Equipment .................................................................................................................. 16
2.19 Safety Decals ......................................................................................................................... 16
2.19.1 Decal Installation/Replacement............................................................................. 16
2.19.2 Safety Decal Locations and Details ........................................................................ 17
3. Features................................................................................................................................................. 25
3.1 ................................................................................................................................................. 25
3.2 Controls ................................................................................................................................... 26
3.3 Tablet and Smartphone Connection ....................................................................................... 26
4. Preparation ........................................................................................................................................... 27
4.1 Emergency Response Plan ...................................................................................................... 27
4.2 Safety Training......................................................................................................................... 27
4.3 Containment............................................................................................................................ 28
5. Transport............................................................................................................................................... 29
5.1 Transport Safety ...................................................................................................................... 29
5.2 Transport Procedure ............................................................................................................... 29
6. Placement ............................................................................................................................................. 33
6.1 Placement Safety..................................................................................................................... 33
6.2 Position the STORM Professional............................................................................................ 33
7. Operation .............................................................................................................................................. 35
7.1 Operation Safety ..................................................................................................................... 35

PROFESSIONAL SERIES – 2017 – SEED TREATER
4 4400–90001
7.2 Pre-Season Tasks ..................................................................................................................... 35
7.3 Conveyor Break-In ................................................................................................................... 35
7.4 Treating Seed........................................................................................................................... 36
7.4.1 Create a Job.............................................................................................................. 36
7.4.2 Calibrate the Pumps................................................................................................. 37
7.4.3 Operate the Treater & Treat Seed ........................................................................... 39
7.4.4 Update the Calibration............................................................................................. 39
7.5 Emergency Stop....................................................................................................................... 40
7.6 Restarting a Full Seed Treater................................................................................................. 40
7.7 General Clean-Out Procedure ................................................................................................. 40
7.8 Chemical Spill Cleanup ............................................................................................................ 41
7.9 Storage..................................................................................................................................... 41
8. Maintenance ......................................................................................................................................... 43
8.1 Maintenance Safety ................................................................................................................ 43
8.2 Maintenance Schedule............................................................................................................ 43
8.3 Visually Inspect the Seed Treater............................................................................................ 45
8.4 Grease/Oil the Bearings and Drive Chain ............................................................................... 45
8.5 Oil the Chain Coupler .............................................................................................................. 46
8.6 Clean the Atomizer and Chemical Hoses ................................................................................ 46
8.7 Check the Chemical Pump Rollers .......................................................................................... 48
8.8 Clean the Filter Strainers......................................................................................................... 48
8.9 Fill the System with Antifreeze ............................................................................................... 49
8.10 Drain Antifreeze from the System ........................................................................................ 49
8.11 Clean the Conveyor Belt........................................................................................................ 49
8.12 Check and Maintain the Containment System ..................................................................... 50
8.13 Advanced Mixer Clean-Out ................................................................................................... 51
8.14 Check and Replace the Pump’s Chemical Hoses .................................................................. 51
8.14.1 Pump Tubing Break-In............................................................................................ 52
8.15 Inspect/Replace the Conveyor Rollers and Bearings ............................................................ 52
8.16 Tension the Conveyor Belt .................................................................................................... 53
8.17 Align the Conveyor Belt......................................................................................................... 54
8.17.1 Adjust the Rollers ................................................................................................... 55
8.18 Tension the Drive Belts ......................................................................................................... 56
8.19 Align the Drive Belts.............................................................................................................. 57
8.20 Replace the Drive Belts ......................................................................................................... 57
8.21 Clean and Wash the Equipment ........................................................................................... 58
8.22 Inspect Belt Lacing................................................................................................................. 58
8.23 Replace the Belt Lacing ......................................................................................................... 58
8.24 Replace the Conveyor Belt.................................................................................................... 58
8.25 Pinion Gear Adjustment ........................................................................................................ 60
8.26 Change the Hydraulic Oil....................................................................................................... 61
9. Troubleshooting.................................................................................................................................... 62
10. Appendix ............................................................................................................................................. 70
10.1 Test Weight Procedure.......................................................................................................... 70
10.2 Updating System Software.................................................................................................... 71
10.2.1 Treating History & Job Information ....................................................................... 72
10.2.2 Formatting a USB ................................................................................................... 72
10.2.3 Downloading Software........................................................................................... 72

PROFESSIONAL SERIES – 2017 – SEED TREATER
4400–90001 5
10.2.4 Installing Software.................................................................................................. 73
11. Specifications ...................................................................................................................................... 74
12. STORM Warranty................................................................................................................................ 75

6 4400–90001
1. Introduction
Thank you for purchasing a STORM Seed Treater. Follow the instructions in this manual for safe use of
the seed treater. With proper care, yourseed treater will provide you with many years of trouble-free
operation.
Keep this manual handy for frequent reference and to review with new personnel. A sign-off form is
provided on the inside front cover for your convenience. If any information in this manual is not
understood or if you need additional information, please contact your local distributor or dealer for
assistance.
This manual should be regarded as part of the equipment. Suppliers of both new and second-hand
equipment are advised to retain documentary evidence that this manual was provided with the
equipment.
1.1. Serial Number Location
Always give your dealer the serial number on your seed treater (shown below) when ordering parts or
requesting service or other information. Please record this information in the table below for easy reference.
Serial Number
Date Received
1.2. Intended Use
The seed treater is intended for use as listed below and described throughout this manual. Use in any other way
is considered as contrary to the intended use.
The seed treater should be operated, maintained, serviced, and repaired only by persons who are familiar with
its particular characteristics and understand the relevant safety procedures.
Accident prevention regulations and all other generally recognized regulations on occupational health and
safety must be observed at all times.
Any modifications made to the seed treater may relieve the manufacturer of liability for any resulting damage
or injury.
Intended use for the seed treater:
• seed types as detailed on the system Operation Screen.
• temperatures warmer than 32°F (0°C).
1. INTRODUCTION PROFESSIONAL SERIES – 2017 – SEED TREATER

4400–90001 7
• capacity at 22.5-45 bu/min (1350-2700 lb/min).
• a suitable hopper bin or truck hopper.
Use in any other way is considered as contrary to the intended use and is not covered by the warranty.
1.2.1 Misuse
Do not install/use the seed treater for/with:
• lifting or using as a hoist or crane.
• any purpose other than treating seed.
• treating oilseeds such as canola.
• normal loading or unloading of grain.
PROFESSIONAL SERIES – 2017 – SEED TREATER 1. INTRODUCTION

8 4400–90001
2. Safety
2.1. Safety Alert Symbol and Signal Words
This safety alert symbol indicates important safety messages in this manual. When you see
this symbol, be alert to the possibility of injury or death, carefully read the message that
follows, and inform others.
Signal Words: Note the use of the signal words DANGER,WARNING,CAUTION, and NOTICE with the safety
messages. The appropriate signal word for each message has been selected using the definitions below as a
guideline.
Indicates an imminently hazardous situation that, if not avoided, will result in serious injury or
death.
Indicates a hazardous situation that, if not avoided, could result in serious injury or death.
Indicates a hazardous situation that, if not avoided, may result in minor or moderate injury.
Indicates a potentially hazardous situation that, if not avoided, may result in property damage.
2.2. General Product Safety
It is the owner, operator, and maintenance personnel's responsibility to read and understand all safety
instructions, safety decals, and manuals and follow them when operating or maintaining the equipment.
• Owners must give instructions and review the information initially and annually with
all personnel before allowing them in the work area. Untrained users/operators
expose themselves and bystanders to possible serious injury or death.
• Use for intended purposes only.
• Do not modify the seed treater in any way without written permission from the manufacturer. Unauthorized
modification may impair the function and/or safety. Any unauthorized modification will void the warranty.
• Follow a health and safety program for your worksite. Contact your local occupational health and safety
organization for information.
2. SAFETY PROFESSIONAL SERIES – 2017 – SEED TREATER

4400–90001 9
2.3. Rotating Flighting Safety
• KEEP AWAY from rotating flighting.
• DO NOT remove or modify flighting guards, doors, or covers.
Keep in good working order. Have replaced if damaged.
• DO NOT operate the seed treater without all guards, doors,
and covers in place.
• NEVER touch the flighting. Use a stick or other tool to
remove an obstruction or clean out.
• Shut off and lock out power to adjust, service, or clean.
2.4. Overhead Power Lines
• When operating or moving, keep seed treater away from
overhead power lines and devices.
• The seed treater is not insulated.
• Electrocution can occur without direct contact.
2.5. Cleated Conveyor Belt Safety
• KEEP HANDS AWAY from moving cleated conveyor belt.
• DO NOT remove or modify guards, doors, or covers. Keep in
place and in good working order. Have replaced if damaged.
• DO NOT operate the conveyor without all guards, doors, and
covers in place.
• Shut off and lock out power to adjust, service, or clean.
2.6. Upending
• Anchor intake end and/or support discharge end to prevent
upending.
• Intake end must always have downward weight. Do not
release until attached to tow bar or resting on ground.
• Do not raise intake end above tow bar height.
• Empty the seed treater and fully lower before moving.
PROFESSIONAL SERIES – 2017 – SEED TREATER 2. SAFETY

10 4400–90001
2.7. Seed Treatment Safety
Hazards associated with handling, sorting, mixing and storage of treated seed and seed treatments can be
minimized by following the safety precautions listed below. The below are guidelines only and vary based on
the type of seed treatment being used. Consult the seed treatment information sheets for full details.
• Before treating seed, follow and have a written plan in place to manage volumes of
contaminated water and/or other liquids used in the cleaning/flushing of the seed treating
equipment.
• Use personal protective equipment as described on the seed treatment product label.
• Use the seed treater only outdoors, do not use inside a building or structure.
• Thoroughly clean the seed treater after use. Some seed treatments are corrosive and others
may plug the equipment. Do not run contaminated water into a stream, public sewer, or in a
location where it could contaminate the groundwater or come into contact with people or
animals.
2.8. Rotating Parts Safety
• Keep body, hair, and clothing away from rotating pulleys,
belts, chains, and sprockets.
• Do not operate with any guard removed or modified. Keep
guards in good working order.
• Shut off and remove key or lock out power source before
inspecting or servicing machine.
2.9. Work Area Safety
• Have another trained person nearby who can shut down the seed treater in case of accident.
• The work area should be kept clear of bystanders, including children.
• Keep the work area clean and free of debris.
• Keep the required personal protective equipment (PPE) and emergency equipment in its designated location.
• Never smoke, drink, or eat in the seed treatment area
• Do not operate with the seed treater in water.
• Keep lighting in place where seed treatment activities are being undertaken during hours of the day when
natural light is not present.
• Have an emergency response plan and keep a copy of the plan in the product manual holder.
• Post a sign identifying the name of the company, applicable management phone numbers, and emergency
response numbers.
2. SAFETY PROFESSIONAL SERIES – 2017 – SEED TREATER

4400–90001 11
2.10. Guards Safety
• Keep guards in place. Do not operate with guard removed.
• Do not walk on, step on, or damage guards.
• Lock out power before removing a guard.
• Ensure all guards are replaced after performing maintenance.
2.11. Raising and Lowering the Seed Treater
• Before raising/lowering/moving/adjusting the seed treater, make sure the area around the
seed treater is clear of obstructions and/or untrained personnel. Never allow anyone to
stand on or beneath the seed treater when it is being placed.
• Lower the seed treater to its lowest position when not in use.
• Empty the seed treater before raising or lowering.
• Do not get on or beneath the seed treater when raising or lowering.
• Raise and lower seed treater on reasonably level ground only.
• Never attempt to increase height of the seed treater by positioning wheels on lumber,
blocks, or by any other means. To do so will result in damage to seed treater and/or serious
injury.
• Do not raise the seed treater in high winds.
2.12. Positioning the Seed Treater
• Transport and place equipment on reasonably level ground when raising, lowering,
positioning, or operating.
• Move the seed treater into position slowly. Do not unhitch and attempt to move by hand.
• Chock wheels and anchor intake end after placement.
PROFESSIONAL SERIES – 2017 – SEED TREATER 2. SAFETY

12 4400–90001
2.13. Towing the Seed Treater
• Check with local authorities regarding transport on public roads. Obey all applicable laws
and regulations.
• Always travel at a safe speed, the seed treater can be transported up to a maximum of 60
mph (100 km/h) where permitted. Reduce speed on rough surfaces. Use caution when
turning corners or meeting traffic.
• Reduce speed on rough surfaces.
• Do not transport on slopes greater than 20°.
• Use caution when turning corners or meeting traffic.
• Do not allow riders on the seed treater or towing vehicle during transport.
• Always attach safety chain(s) for transport on roadways.
• Place the seed treater in the transport position before moving on roads.
2.14. Drives and Lockout Safety
Inspect the power source(s) before using and know how to shut down in an emergency.
Whenever you service or adjust your equipment, make sure you shut down the power
source and follow lockout and tagout procedures to prevent inadvertent start-up and
hazardous energy release. Know the procedure(s) that applies to your equipment from the
following power source(s). Ensure that only 1 key exists for each assigned lock, and that
you are the only one that holds that key. Ensure that all personnel are clear before turning
on power to equipment.
WARNING
2.14.1 Diesel Engine Safety
Power Source
• Keep guards in place and secure.
• Properly ventilate surrounding area.
• Never overfill the tank or spill diesel fuel. If fuel is spilled,
clean it up immediately.
• Ultra-Low Sulfur Diesel (ULSD) poses a greater static ignition
hazard than earlier diesel formulations. Avoid death or
serious injury from fire or explosion; consult with your fuel or
fuel system supplier to ensure the delivery system is in
compliance with fueling standards for proper grounding and
bonding practices that are crucial when refueling.
• Be sure to replace the fuel fill cap when you are done.
Lockout
• Remove the ignition key or disconnect the negative battery
terminal.
2. SAFETY PROFESSIONAL SERIES – 2017 – SEED TREATER

4400–90001 13
2.14.2 Electric Motor Safety
Power Source
• Electric motors and controls shall be installed and serviced by a qualified electrician and
must meet all local codes and standards.
• Guards must be in place and secure.
• Ensure electrical wiring and cords remain in good condition; replace if necessary.
2.14.3 Hydraulic Power Safety
Power Source
• Refer to the rules and regulations applicable to the power
source operating your hydraulic drive.
• Do not connect or disconnect hydraulic lines while system is
under pressure.
• Keep all hydraulic lines away from moving parts and pinch
points.
• Escaping hydraulic fluid under pressure will cause serious
injury if it penetrates the skin surface (serious infection or
toxic reaction can develop). See a doctor immediately if
injured.
• Use metal or wood as a backstop when searching for
hydraulic leaks and wear proper hand and eye protection.
• Check all hydraulic components are tight and in good
condition. Replace any worn, cut, abraded, flattened, or
crimped hoses.
• Clean the connections before connecting to equipment.
• Do not attempt any makeshift repairs to the hydraulic fittings
or hoses with tape, clamps, or adhesive. The hydraulic
system operates under extremely high pressure; such repairs
will fail suddenly and create a hazardous and unsafe
condition.
Lockout
• Always place all hydraulic controls in neutral and relieve
system pressure before disconnecting or working on
hydraulic system.
PROFESSIONAL SERIES – 2017 – SEED TREATER 2. SAFETY

14 4400–90001
2.15. Tire Safety
Failure to follow proper procedures when mounting a tire on a
wheel or rim can produce an explosion that may result in
serious injury or death.
• DO NOT attempt to mount a tire unless you have the proper
equipment and experience to do the job.
• Have a qualified tire dealer or repair service perform
required tire maintenance.
• When replacing worn tires, make sure they meet the original
tire specifications. Never undersize the replacement tire.
• DO NOT weld to the tire rim with the tire mounted on the
rim. This action may cause an explosion which could result in
serious injury or death.
• Inflate tires to the manufacturer’s recommended pressure.
• Tires should not be operated at speeds higher than their
rated speed.
• Keep wheel lug nuts tightened to manufacturer’s
recommendations.
• Never reinflate a tire that has been run flat or seriously
under-inflated without removing the tire from the wheel.
Have the tire and wheel closely inspected for damage before
remounting.
2.16. Battery Safety
• Wear safety glasses and protective gloves when working near
batteries.
• Make certain the battery or terminal covers are in place and
in good working order.
• Keep all sparks and flames away from batteries; gas given off
by electrolyte is explosive.
• Avoid contact with battery electrolyte. Wash off any spilled
electrolyte immediately.
• Do not tip batteries more than 45° to avoid electrolyte loss.
• To avoid injury from sparks or short circuits, disconnect
battery ground cable before servicing any part of an electrical
system.
2. SAFETY PROFESSIONAL SERIES – 2017 – SEED TREATER

4400–90001 15
2.17. Personal Protective Equipment
The following Personal Protective Equipment (PPE) should be worn when operating or maintaining the
equipment.
Safety Goggles
• Wear safety goggles at all times to protect eyes from chemicals.
Coveralls
• Wear coveralls to protect skin.
Hard Hat
• Wear a hard hat to help protect your head.
Rubber Boots
• Wear rubber boots to prevent contact with chemicals.
Chemically Resistant Gloves
• Wear chemically resistant gloves to protect your hands from chemicals.
Respirator
• Wear a respirator with chemical cartridges to prevent breathing potentially harmful
vapors.
Hearing Protection
• Wear ear protection to prevent hearing damage.
PROFESSIONAL SERIES – 2017 – SEED TREATER 2. SAFETY

16 4400–90001
2.18. Safety Equipment
The following safety equipment should be kept on site:
Fire Extinguisher
• Provide a fire extinguisher for use in case of an accident. Store in a highly visible and
accessible place.
First-Aid Kit
• Have a properly-stocked first-aid kit available for use should the need arise, and
know how to use it.
Eyewash Kit
• Keep a portable eye wash kit available or make sure a permanent eyewash station is
available should the need arise to flush materials from the eyes. Review instructions
for use before working with the seed treater.
Salvage Container
• Keep a sealable salvage container on site, such as a spill containment pallet.
Absorbent Materials
• Keep granular absorbent materials on hand to clean up any chemical spills.
Aluminum Shovel and Broom
• Keep an aluminum shovel and broom for cleanup of spilled materials.
2.19. Safety Decals
• Keep safety decals clean and legible at all times.
• Replace safety decals that are missing or have become illegible. See decal location figures that follow.
• Replaced parts must display the same decal(s) as the original part.
• Replacement safety decals are available free of charge from your distributor, dealer, or factory as applicable.
2.19.1 Decal Installation/Replacement
1. Decal area must be clean and dry, with a temperature above 50°F (10°C).
2. SAFETY PROFESSIONAL SERIES – 2017 – SEED TREATER

4400–90001 17
2. Decide on the exact position before you remove the backing paper.
3. Align the decal over the specified area and carefully press the small portion with the exposed sticky backing
in place.
4. Slowly peel back the remaining paper and carefully smooth the remaining portion of the decal in place.
5. Small air pockets can be pierced with a pin and smoothed out using the sign backing paper.
2.19.2 Safety Decal Locations and Details
Replicas of the safety decals that are attached to the seed treater and their messages are shown in the figure(s)
that follow. Safe operation and use of the seed treater requires that you familiarize yourself with the various
safety decals and the areas or particular functions that the decals apply to, as well as the safety precautions
that must be taken to avoid serious injury, death, or damage.
9909-00021
P1513003
P1513036
P1513001
9909-00024
9909-00023
9909-00025 9909-00026
9909-00027
9909-00030
9909-00031
9909-00022
9909-00032
9909-00033
9909-00016
9909-00017
9909-00028
9909-00029
PROFESSIONAL SERIES – 2017 – SEED TREATER 2. SAFETY

18 4400–90001
Table 1. Safety Decals
Part Number Description
9909–00021
To prevent death or serious injury:
• KEEP AWAY from rotating auger flighting.
• DO NOT remove or modify auger flighting
guards, doors, or covers. Keep in good working
order. Have replaced if damaged.
• DO NOT operate the auger without all guards,
doors, and covers in place.
• NEVER touch the auger flighting. Use a stick or
other tool to remove an obstruction or clean out.
• Shut off and lock out power to adjust, service, or
clean.
ROTATING FLIGHTING HAZARD
DANGER
2. SAFETY PROFESSIONAL SERIES – 2017 – SEED TREATER

4400–90001 19
Table 1 Safety Decals (continued)
Part Number Description
P1513003
To prevent death or serious injury:
• When operating or moving, keep equipment
away from overhead power lines and devices.
• Fully lower equipment before moving.
This equipment is not insulated.
Electrocution can occur without direct contact.
DANGER
ELECTROCUTION HAZARD
P1513036
HIGH PRESSURE FLUID HAZARD
Hydraulic fluid can cause serious injury if it
penetrates the skin. If it does, see a doctor
immediately.
• Relieve system pressure before repairing, adjusting
or disconnecting.
• Wear proper hand and eye protection when searching
for leaks. Use wood or cardboard instead of hands.
WARNING
PROFESSIONAL SERIES – 2017 – SEED TREATER 2. SAFETY

20 4400–90001
Table 1 Safety Decals (continued)
Part Number Description
P1513001
To prevent serious injury or death:
• Read and understand the manual before
assembling, operating, or maintaining the
equipment.
• Only trained personnel may assemble, operate,
or maintain the equipment.
• Children and untrained personnel must be kept
outside of the work area.
• Do not modify the equipment. Keep in good
working order.
• If the manual, guards, or decals are missing or
damaged, contact factory or representative for
free replacements.
• Lock out power before performing maintenance.
• To prevent equipment collapse or upending,
support equipment tube while disassembling
certain components.
• Electric motors must be grounded. Disconnect
power before resetting overloads.
WARNING
2. SAFETY PROFESSIONAL SERIES – 2017 – SEED TREATER