Amibot Spirit LASER User manual

Robot vacuum
User manual
Spirit
LASER

ENEN
User manual
Thank you for choosing AMIBOT! We hope you are fully satisfied
using your robot as part of your cleaning routine.
If you should encounter situations that have not been properly
addressed in this User Manual or were to have any queries, do not
hesitate to contact us and a member of our Technical Customer
Service Department will be more than happy to answer your
questions.
For more information, you can visit the official AMIBOT website:
www.amibot.tech
We reserve the right to make technical alterations to the appliance
without prior notice with the objective of continually improving our
products and customer satisfaction.
Please carefully read all instructions in this manual before using this
appliance. AMIBOT will not be liable for damage due to incorrect use.

1
Contents
EN
1
EN
Recommendations........................................................3
Product overview..........................................................4
Contents of the box..............................................................................4
Product diagram ...................................................................................5
Operating the appliance ..............................................9
Mobile app.............................................................................................9
Charging................................................................................................11
Vacuum mode (dust bin).....................................................................13
Mopping mode (2-in-1 H2O tank) ......................................................14
Starting the appliance .........................................................................16
Scheduling ............................................................................................17
Cleaning routes ....................................................................................18
Virtual barrier .......................................................................................20
Pause.....................................................................................................21
Stopping the vacuum ..........................................................................21
Remote control ....................................................................................22
Maintenance.................................................................23
Side brushes.........................................................................................23
Side wheels and castor .......................................................................23
Compartments and filters...................................................................24
Gap and power sensors ......................................................................26
Central brush........................................................................................26
Microfibre cleaning pads ...................................................................27
Indicator sounds and audible warnings....................28
Troubleshooting...........................................................29
Tables: Malfunctions and possible causes........................................29
Warranty and after-sales service...............................35

2
Contents
EN
2
EN
Technical specifications ..............................................36
Safety instructions and precautions .........................37
Operating conditions...........................................................................37
Recycling instructions .................................................39

3
Recommendations
EN
• AMIBOT Spirit Laser works with the AMIBOT mobile app (available
for Android and iOS). All of its functions can be accessed from the
app.
• The remote control supplied only offers the basic functions of a
robot vacuum cleaner.
• AMIBOT Spirit Laser is designed to be used inside.
• AMIBOT Spirit Laser is designed for a maximum surface area of
200 m2.
• AMIBOT Spirit Laser is designed for routine floor cleaning. It is
not intended to replace heavy-duty cleaning.
• AMIBOT Spirit Laser needs a headway of at least 10 cm so that it
can go under furniture.
• AMIBOT Spirit Laser cannot go over thresholds over 1cm thick,
otherwise it automatically stops or reverses.
• AMIBOT Spirit Laser is not designed to be used on long-pile
carpets, which could cause the robot to freeze or reverse.
• AMIBOT Spirit Laser must be used on flat surfaces.
• If the robot could come across a gap while cleaning, please secure
the area and check that the gap sensors are clean.
• AMIBOT Spirit Laser is not designed to vacuum water or other
liquid products.
• Do not use the appliance on damp floors.
• Please switch the appliance off before handling it (manually
moving it, maintenance, storing it away).
• The remote control requires 2 x LR03-type batteries (AAA). They
are not supplied with the robot.
• The laser module located on the top of the robot is fragile. Never
press or pull on it as you risk damaging it.

4
Product overview
EN
Contents of the box
1 2
3
6
7
9
8
54
10 11 12
1. AMIBOT Spirit Laser robot
2. Dust bin
3. 2-in-1 H2O tank
4. 2 x microfibre cleaning pads
5. 2 x HEPA filters
6. 4 x side brushes
7. Cleaning tool
8. Home base
9. Power adapter
10. Magnetic virtual barrier
11. Remote control (batteries
not included)
12. User manual

5
Product overview
EN
Product diagram
1
1
2
2
3
5
4
1. AUTO button
2. Wi-Fi pairing button
3. Laser module
1. ON/OFF button
2. Power socket
Robot side view
Robot top view
4. Bumper
5. Compartment space

6
Product overview
EN
1. Gap sensors
2. Power sensors
3. Side brushes
4. Battery cover
5. Side wheels
2
1
3
5
4
Robot bottom view
6. Castor
7. Central brush cover
8. Central brush
9. Tank
Dust bin
1. Prefilter
2. HEPA filter
3. Dust bin cover
4. Filter housing
5. Dust bin release button
1
2
3
4
5
6
7
8
9

7
Product overview
EN
1. H2O tank section
2. 2-in-1 H2O tank release
button
3. Dust bin section
4. Dust bin grab handle
5. Refill cap
H2O tank
2
1
5
6
7
8
9
103
4
6. Drip nozzle
7. Cleaning pad Velcros
8. Drip plugs
9. Tank castor
10. H2O tank sensors
Home base
1. Power indicator light
2. Power socket
3. Charging poles
1
2
3

8
Product overview
EN
1. Screen
2. PLAN button
3. ON/OFF button (power)
4. MODE button
5. CLOCK button (manual time
setting)
6. HOME button
7. Directional arrows
8. MAX button
Remote control
1
2
3 7
4
5
8
6

9
Operating the appliance
EN
Mobile app
Downloading
Pairing a device
Download the AMIBOT mobile app available for Android and iOS,
then create an account. To do this, follow the steps in the app di-
rectly.
Add the robot using the "+" button on the app’s home page.
To activate the robot’s pairing mode, press the Wi-Fi pairing button
for a about 10 seconds (see product composition page 5). Then
follow the steps indicated on your smartphone.
Once the robot is correctly paired to your smartphone, go to its
settings and control it remotely.
The AMIBOT app offers access to all the functions listed in this
manual. The remote control supplied does not let you change the
robot’s settings (see page 22).

10
Operating the appliance
EN
Sharing the robot
You can control the robot on several smartphones at a time. To do
this, the robot must be shared.
Go to your personal area from the app and click shared Robot.
Select the robot and enter the email address of the user account
you want to perform the sharing with. The user must have already
downloaded the AMIBOT app and created their account. They will
then accept the sharing of the Robot from their app.
NOTES:
• You have to have one AMIBOT user account per smartphone.
• A robot can be shared on up to 5 accounts. Only the primary user can share
the robot.
• To remove a robot that has been shared, click on the image of the robot from
the shared Robot page and confirm the deletion.
Settings
To access the robot’s settings, please click on the three points located
at the top right of the smartphone screen, next to the robot’s name.
NOTE: For the purposes of continuous improvement, updates to the AMIBOT
mobile app may lead to some settings being changed.

11
Operating the appliance
EN
Assembling the home base
Charging
1m
1m
2m
Plug in the home base using the power cable.
Place the home base on a level surface next to a wall, at a right angle
to the floor. Keep a distance of at least 2m in front of the base and
1m at either side.
NOTE: When your AMIBOT Spirit Laser robot is on its home base, make sure that
your robot is switched on and the home base power light is on.
Turn the power switch to ON. "I" is ON and "O" is OFF. The robot is
ready to be charged.
Switching the robot on

12
Operating the appliance
EN
Charging the robot
Figure 1 Figure 2
There are two ways to charge the battery:
• Using the home base (Figure 1).
• Using the power adapter (Figure 2).
NOTES:
• Before using the robot for the first time, you must charge it for at least 12
hours. The battery will only need to be charged for 240 or 300 minutes
thereafter.
• The robot must be switched on while it is being charged.
• Do not place a mirror or other highly reflective object within a distance of at
least 15cm from the home base.
• When the robot’s battery is completely flat, the AUTO indicator light slowly
flashes red. While charging the LED flashes green. Once fully charged, the
AUTO light turns steady green.
• If the battery is weak while the robot is cleaning, it returns to its home base.
The home base must therefore be switched on.
• If the robot is not used for a long period of time, you are recommended to
fully charge the battery, switch off the robot and store it in a cool, dry place.

13
Operating the appliance
EN
Vacuum mode (dust bin)
To use the vacuum mode, attach the dust bin to the back of the
appliance.
NOTE: The dust bin has a maximum capacity of 475ml.

14
Operating the appliance
EN
Mopping mode (2-in-1 H2O tank)
Attaching the cleaning pad
Figure 1
Figure 2
Figure 3
Attach the cleaning pad (Figure 1) to the 2-in-1 H2O tank using the
Velcros on the underneath (Figure 2 and 3).

15
Operating the appliance
EN
Preparation and inserting the H2O tank
Open the H2O tank's refill nozzle (Figure 1) and carefully pour in
clean water with some floor cleaner.
Then attach the dust bin to the H2O tank (Figure 2) to create the 2-in-
1 H2O tank (Figure 3).
NOTES:
• The 2-in-1 H2O tank is divided into two sections: the H2O tank has a maximum
capacity of 220 ml and the dust bin has a capacity of 230 ml. For optimum
performance, the H2O tank must have at least 50 ml of liquid.
• For optimum cleaning, check the dilution ratio indicated on the detergent
bottle.
• Only use floor cleaner products. Prolonged use of any other product, such as
white vinegar, black soap or bleach, could damage the H2O tank.
Figure 1
Figure 3
Figure 2

16
Operating the appliance
EN
With the H2O tank, the robot can vacuum and mop floors in one go.
Clip the 2-in-1 H2O tank to the back of the robot. The robot
automatically detects this tank with its sensors (see composition
of the product page 7). The robot is ready to start vacuuming and
mopping.
When the robot is turned on for its cleaning cycle, the vacuum
suction starts and the automatic pump in the H2O tank is activated
to clean hard floors.
NOTES:
• It is possible to adjust the intensity of the flow of water from the H2O tank.
From the settings, select the desired intensity of flow in the “Washing control”
option. Do not use the 2-in-1 H2O tank to clean rugs or carpets.
• Please remove the 2-in-1 H2O tank from the robot before charging.
Inserting the H2O tank
All of the functions below can only be accessed from the AMIBOT
mobile app.
After having attached the Dust bin, press the robot’s AUTO button,
or press "Start" on the app. The robot starts its cleaning cycle in
AUTO Mode.
Starting the appliance

17
Operating the appliance
EN
Scheduling is only performed on the AMIBOT mobile app.
With the daily schedule feature, the robot can start a cleaning cycle
at the time and on the days you choose. You can reset the time and
scheduled times whenever you want via the button on the mobile
app.
Setting a schedule
Determine cleaning slots from the mobile app.
Once on the home page, go to the robot’s options.
Select "Cleaning slot". Then click on "Add" to determine the desired
cleaning times and days.
Scheduling
NOTES:
• If the 2-in-1 H2O tank is attached, the robot starts its cleaning cycle in AUTO
Mode.
• If the robot is on standby, press the AUTO button on the robot or “Start” on the
mobile app.
• The robot's cycle can be interrupted and it can be manually controlled using
the arrow buttons.

18
Operating the appliance
EN
Cleaning routes
The robot has five cleaning routes. These
routes can be selected from the AMIBOT
mobile app. AUTO Mode can also be
selected on the robot.
AUTO Mode
Press the AUTO button on the robot or
“Start”. Using its laser module, the robot
analyses the room to clean and goes back
to the wall closest to it. It then divides the room into squares by 4
m by 4 m area in a zig-zag fashion to vacuum any debris and dust.
MAX Mode
SILENT Mode
The MAX mode is useful for floors that are extremely dusty.
When the robot performs a cleaning cycle, you can increase its
suction power. To do this, go to the robot’s settings from the mobile
app (the three points in the top right of the screen), select Cleaning
mode and then the option Powerful.
In SILENT mode, the robot decreases its suction power and moves
more slowly.
To switch to SILENT Mode, select the Silent option in the robot’s
settings.
NOTE: The robot will automatically start at the time on your smartphone via the
AMIBOT mobile app.