Amibot Spirit PREMIUM User manual

EN
Robot vacuum
User manual
Spirit
PREMIUM &
PREMIUM STATION

ENEN
User manual
Thank you for choosing AMIBOT! We hope you are fully satisfied
using your robot as part of your cleaning routine.
If you should encounter situations that have not been properly
addressed in this User Manual or were to have any queries, do not
hesitate to contact us and a member of our Technical Customer
Service Department will be more than happy to answer your
questions.
For more information, you can visit the official AMIBOT website:
www.amibot.tech
We reserve the right to make technical alterations to our products
without prior notice with the objective of continually improving our
products and customer satisfaction.
Please carefully read all instructions in this manual before using this
appliance. AMIBOT will not be liable for damage due to incorrect use.

1
Contents
EN
1
EN
Recommendations........................................................3
Product overview .........................................................4
Product contents...................................................................................4
Product diagram ...................................................................................6
Operation......................................................................11
Mobile app............................................................................................11
Charging................................................................................................13
Vacuum mode .....................................................................................16
Mopping mode.....................................................................................16
Starting the robot ................................................................................19
Daily.......................................................................................................19
Cleaning modes ...................................................................................20
Pause.....................................................................................................22
Stopping the robot ..............................................................................22
Maintenance.............................................................23
Side brushes ........................................................................................23
Side wheels and castor .......................................................................23
Compartments and filters...................................................................24
Gap and power sensors......................................................................25
Central brush........................................................................................26
Microfibre cleaning pads ..................................................................26
Auto-empty station (Spirit Premium Station version) .........................27
Indicator lights and sounds........................................28
Troubleshooting...........................................................30
Tables: Malfunctions and possible causes .......................................30
Warranty and after-sales service...............................37

2
Contents
EN
2
EN
Technical specifications..............................................38
Robot AMIBOT Spirit Premium ..........................................................38
Auto-empty station..............................................................................39
Safety instructions and precautions ........................40
Operating conditions ..........................................................................40
Recycling instructions .................................................42

3
Recommendations
EN
• AMIBOT Spirit Premium works with the AMIBOT HOME mobile
app (available for Android and iOS). All of its functions can be
accessed from the app.
• The remote control supplied only offers the basic functions of a
robot vacuum cleaner.
• AMIBOT Spirit Premium is designed to be used inside.
• AMIBOT Spirit Premium is designed for a maximum surface area
of 220m².
• AMIBOT Spirit Premium is designed for routine floor cleaning. It
is not intended to replace heavy-duty cleaning.
• AMIBOT Spirit Premium needs a headway of at least 11 cm so
that it can go under furniture.
• AMIBOT Spirit Premium cannot go over thresholds over 1 cm
thick, otherwise it automatically stops or reverses.
• AMIBOT Spirit Premium is not designed to be used on long-pile
carpets, which could cause the robot to freeze or reverse.
• AMIBOT Spirit Premium must be used on flat surfaces.
• If the robot could come across a gap while cleaning, please secure
the area and check that the gap sensors are clean.
• AMIBOT Spirit Premium is not designed to vacuum water or other
liquid products.
• Do not use the appliance on damp floors.
• Please switch the appliance off before handling it (manually
moving it, maintenance, storing it away).
• The remote control requires 2 x LR03-type batteries (AAA). They
are not supplied with the robot.
• The laser module located on the top of the robot is fragile. Never
press or pull on it as you risk damaging it.

4
Product overview
EN
Product contents
1 2
3
6 7
9
8
54
10 11
AUTO
OK

5
Product overview
EN
1. AMIBOT Spirit Premium
robot
2. 2-in-1 compartment
3. 2 x microfibre cleaning pads
and base
4. 2 x HEPA filters
5. Home base and power
adapter (Spirit Premium
version)
6. 4 x side brushes
7. Cleaning tool
8. Remote control (batteries
not included)
9. User manual
10. 2 x dust bags (Spirit
Premium Station version)
11. Auto-empty station (Spirit
Premium Station version)

6
Product overview
EN
Product diagram
1
2
3
5
4
1. Power button
2. Home base button
3. Laser module
1. Wall sensor
Robot side view
Robot top view
4. Bumper
5. Bin
1

7
Product overview
EN
1. Gap sensors
2. Power sensors
3. Side brushes
4. Battery cover
5. Side wheels
2
1
Robot bottom view
6. Castor
7. Central brush cover
8. Central brush
9. Tank
2-in-1 compartment and cleaning pad base
1. Filter housing
2. Prefilter
3. HEPA filter
4. Refill cap
5. Dustbin release button
1
2
3
4
5
6
7
8
9
4
3
5

8
Product overview
EN
1. Drip nozzles
2. Cleaning pad Velcros
Home base (Spirit Premium version)
1. Power indicator light
2. Charging contacts
3. Power terminal
4. Integrated cable tidy
5. Recess for cable
6. Cover
1
2
3
6
4
5
1 2

9
Product overview
EN
Auto-empty station (Spirit Premium Station version)
2
1
3
4
4
5
1
5
2
3
1. Power indicator light
2. Infrared emitter
3. Auto-empty inlet
1. Cover
2. Dust bag connector
3. Dust bag
4. Dust evacuation tube
5. Fan cover
4. Auto-empty station pins
5. Power cord port

10
Product overview
EN
1. AUTO mode
2. Directional arrow buttons
3. MAX mode
4. Mute button
5. Light button
6. Home base button
7. Start/pause button
8. Auto-empty station button
(Spirit Premium Station ver-
sion)
9. Water flow button
10. AREA TO CLEAN mode but-
ton
Remote control
1
2
3
7
4
5
6
8
9
10
AUTO
OK

11
Operation
EN
Mobile app
Downloading
Pairing a device
Download the AMIBOT HOME mobile app available for Android and
iOS, then create an account. To do this, follow the steps in the app
directly.
Add the robot using the "+" button on the app’s home page.
To activate the robot’s pairing mode, hold the power button and
home base button at the same time for around 5 seconds. Then
follow the steps indicated on your smartphone.
Once the robot is correctly paired to your smartphone, go to its
settings and control it remotely.
The AMIBOT HOME app offers access to all the functions listed in this
manual.
IMPORTANT: You must make sure that
your Wi-Fi router is connected to the
2.4GHz band and not the 5GHz band
so that you can pair your robot with the
AMIBOT HOME app. Please check your
router settings or contact your Internet
provider’s customer service department.

12
Operation
EN
Sharing the robot
You can control the robot on several smartphones at a time. To do
this, the robot must be shared.
Go to the robot’s page and click on the Pencil icon at the top right of
the screen. Select Share Devices then Add Sharing. Enter the email
address of the user you want to share the robot with. The user must
have already downloaded the AMIBOT HOME app and created their
account.
NOTE:
• You need to have one AMIBOT Home user account per smartphone.
• To remove a user from a robot share, go to the device’s sharing settings,
select the user you would like to remove and swipe to the left. Then click on
Delete. The user can also remove the robot directly via these same settings by
clicking on Remove robot sharing.
Operating the robot
The robot has a laser and smart gyroscope system. It uses a precise
route and marks out the area it will clean in squares.
Thanks to the laser and AMIBOT HOME mobile app, you can follow
the robot’s cleaning route in real time via the map.
NOTE: For the purposes of continuous improvement, updates to the AMIBOT HOME
mobile app may lead to some settings being changed.

13
Operation
EN
Assembling the home base (Spirit Premium version)
Charging
To plug in the home base, open the cover under the robot and plug
in the power cable. Wind the cable around integrated cable tidy
and thread through the recess. Then put the cover back on again.
Place the home base on a level surface next to a wall, at a right angle
to the floor. Keep a distance of at least 1.5m in front of the base and
0.5m at either side.
NOTE: When your AMIBOT Spirit Premium robot is on its home base, make sure that
your robot is switched on and the home base power light is on.
0.5m 0.5m
1.5m
Assembling the auto-empty station (Spirit Premium Station
version)
0.5m
1.5m
0.5m

14
Operation
EN
Plug in the auto-empty station using the power cable. Place the
home base on a level surface 6cm from the wall. Keep a distance of
at least 1.5m in front of the base and 0.5m at either side. Place the
dust bag in its compartment in the auto-empty station.
Once cleaning is complete, the robot goes to auto-empty at its auto-
empty station and then charges from the front.
NOTE:
• When your AMIBOT Spirit Premium robot is on its auto-empty station, make
sure that your robot is switched on and the station’s power light is on.
• The auto-empty station must be placed on a smooth, flat surface, otherwise
the robot may not empty effectively.
Press the power button for 3
seconds. The robot is ready to
be charged.
Switching on the robot

15
Operation
EN
Charging the robot
The battery can only be charged on the home base.
NOTE:
• The robot must be switched on while it is being charged.
• Do not place a mirror or other highly reflective object within a distance of at
least 15cm from the home base.
• Do not place the home base in direct sunlight.
• When the robot’s battery is completely flat, the power button’s indicator light
flashes red. While charging, the indicator light flashes blue. Once fully charged,
the indicator light is steady blue.
• If the battery is weak while the robot is cleaning, it automatically returns to its
home base. The home base must therefore be switched on.
• If the robot is not used for a long period of time, you are recommended to fully
charge the battery, switch off the robot and store it in a cool, dry place.

16
Operation
EN
Vacuum mode
To use the vacuum mode, attach the dustbin to back of the appliance.
Mopping mode
Attaching the cleaning pad
Figure 1
Figure 2
Attach the cleaning pad (Figure 1) to the base using the Velcros on
the underneath (Figure 2).

17
Operation
EN
Preparing and inserting the 2-in-1 compartment
Open the water tank’s refill nozzle (Figure 1) and carefully pour in
clean water with some floor cleaner.
NOTE:
• For optimum performance, the water tank must have at least 50ml of liquid.
• For optimum cleaning, check the dilution ratio indicated on the detergent bottle.
• Only use floor cleaner products. Prolonged use of any other product, such as
white vinegar, essential oils, black soap or bleach, could damage the water tank.
• A cleaning pad must be attached to the back of the robot whenever there is
water in the water tank.
Figure 1

18
Operation
EN
Thanks to the 2-in-1 compartment, the robot can vacuum and mop
hard floors at the same time. Clip it on the cleaning pad attachment
to the back of the robot, which automatically detects the tank. The
robot is ready to start its mopping cycle.
When the robot is turned on for its cleaning cycle, the automatic
pump in the water tank is activated to clean hard floors.
NOTE:
• You can regulate the water tank’s water flow intensity via the remote control
(see page 10).
• Do not use the water tank on rugs or carpets.
• Empty the water tank and remove the cleaning pad attachment from the robot
before charging it.
Tips: When using the mopping mode, remove the central brush from its compartment to
prevent risk of oxidation. This will make cleaning the robot easier!
Inserting the 2-in-1 compartment