Amibot vision User manual

EN
Robot vacuum
User manual

ENEN
User manual
Thank you for choosing AMIBOT! We hope you are fully satisfied
using your robot as part of your cleaning routine.
If you should encounter situations that have not been properly
addressed in this User Manual or were to have any queries, do not
hesitate to contact us and a member of our Technical Customer
Service Department will be more than happy to answer your
questions.
For more information, you can visit the official AMIBOT website:
www.amibot.tech
We reserve the right to make technical alterations to our products
without prior notice with the objective of continually improving our
products and customer satisfaction.
Please carefully read all instructions in this manual before using this
appliance. AMIBOT will not be liable for damage due to incorrect use.

1
Contents
EN
1
EN
Recommendations........................................................3
Product overview .........................................................4
Product contents ..................................................................................4
Product diagram ...................................................................................5
Operation.......................................................................9
Mobile app ............................................................................................9
Features ................................................................................................11
Vacuum and mop.................................................................................12
Scheduling ...........................................................................................12
Cleaning modes ..................................................................................13
Charging the robot .............................................................................14
Vacuum mode (Dustbin) .....................................................................16
Mopping mode (water tank) ..............................................................17
Starting the robot ................................................................................18
Cleaning modes ...................................................................................20
Pause.....................................................................................................22
Stopping the robot ..............................................................................22
Maintenance ................................................................24
Side brushes.........................................................................................24
Side wheels and castor .......................................................................24
Compartments and filters...................................................................25
Gap and power sensors......................................................................26
Central brush........................................................................................27
Microfibre cleaning pads ..................................................................27
Indicator lights and sounds........................................28
Troubleshooting...........................................................29
Tables: Malfunctions and possible causes .......................................29
Warranty and after-sales service ..............................35

2
Contents
ENEN
Technical specifications .............................................36
Safety instructions and precautions .........................37
Operating conditions ..........................................................................37
Recycling instructions .................................................39

3
Recommendations
EN
• AMIBOT Vision works with the AMIBOT Home mobile app
(available for Android and iOS). All of its functions can be accessed
from the app.
• The remote control supplied only offers the basic functions of a
robot vacuum cleaner.
• AMIBOT Vision is designed to be used inside.
• AMIBOT Vision is designed for routine floor cleaning. It is not
intended to replace heavy-duty cleaning.
• AMIBOT Vision needs a headway of at least 8.5cm so that it can
go under furniture.
• AMIBOT Vision cannot go over thresholds over 1 cm thick,
otherwise it automatically stops or reverses.
• AMIBOT Vision is not designed to be used on long-pile carpets,
which could cause the robot to freeze or reverse.
• AMIBOT Vision must be used on flat surfaces.
• If the robot could come across a gap while cleaning, please secure
the area and check that the gap sensors are clean.
• AMIBOT Vision is not designed to vacuum water or other liquid
products.
• Do not use the appliance on damp floors.
• Please switch the appliance off before handling it (manually
moving it, maintenance, storing it away).
• The remote control requires 2 x LR03-type batteries (AAA). They
are not supplied with the robot.

4
Product overview
EN
Product contents
1 32
8
1211
4
10
1. AMIBOT Vision robot
2. Water tank
3. Dustbin
4. 2 x microfibre cleaning pads
5. 2 x HEPA filters
6. 4 x side brushes
7. Home base
8. Camera cover
9. Power adapter
10. Remote control (batteries
not included)
11. Cleaning tool
12. User manual
5 6
7 9

5
Product overview
EN
Product diagram
4
1 2
1 3
1. HOME button
2. Camera module
3. Bumper
4. AUTO / Wi-Fi pairing button
1. ON/OFF button
2. Power terminal
Robot side view
Robot top view
5. Dustbin/water tank compart-
ment
6. Camera cover
5
62

6
Product overview
EN
1. Gap sensors
2. Power sensors
3. Side brushes
4. Castor
2
1
3
5
4
Robot bottom view
5. Battery cover
6. Side wheels
7. Central brush cover
8. Central brush
Dustbin
1. Prefilter
2. HEPA filter
3. Dustbin cover
4. Dustbin release button
5. Filter housing
1
2
3
4
6
5
7
R
8

7
Product overview
EN
1. Refill cap
2. Compartment release button
3. Drip nozzle
4. Cleaning pad Velcros
5. Cleaning pad
Home base
1. Charging contacts
2. Power indicator lights
1
4
Water tank
1
2 3
4
2
5
3
3. Power terminal
4. Power adapter

8
Product overview
EN
1. ON/OFF button
2. Random mode button
3. PAUSE/AUTO button
4. SILENT mode button
5. Spot mode button
6. Wall mode button
7. HOME button
8. Directional arrow buttons
9. MAX mode button
Remote control
1
2
3 8
4
5
9
7
6

9
Operation
EN
Mobile app
Downloading
Pairing a device
Download the AMIBOT Home mobile app available for
Android and iOS, then create an account. To do this, follow the
steps in the app directly.
Add the robot using the "+" button on the app’s home page.
To activate the robot’s pairing mode, press the Wi-Fi - AUTO pairing
button for 3to5seconds
(see product diagram on page 5).
The robot emits a sound. Then follow the steps indicated on your
smartphone.
Once the robot is correctly paired to your smartphone, go to
its settings and control it remotely.
IMPORTANT: You must make sure
that your Wi-Fi router is connected
to the 2.4 GHz band and not the
5GHz band so that you can pair your
robot with the app. Please check
your router settings or contact your
Internet provider’s customer service
department.

10
Operation
EN
Settings
To access the robot’s settings, click on the “Pencil” icon
located at the top right of the smartphone screen. Here,
you can access different options, such as customising the
name, sharing your robot, activating notifications, etc.
NOTE: For the purposes of continuous improvement, updates to the AMIBOT HOME
mobile app may lead to some settings being changed.
Sharing the robot
You can control the robot on several smartphones at a
time. To do this, the robot must be shared.
Go to the robot’s page and click on the “Pencil” icon at the top
right of the screen. Select “Share Devices” then “Add
Sharing”. Enter the email address of the user you want to share the
robot with. The user must have already downloaded the AMIBOT
Home app and created their account.
NOTE:
• You need to have one AMIBOT Home user account per smartphone.
• To remove a user from a robot share, go to the device’s sharing settings,
select the user you would like to remove and swipe to the left.
• Then click on Delete. The user can also remove the robot directly via these
same settings by clicking on “Remove robot sharing”.

11
Operation
EN
Features
You can start or pause the robot’s cleaning cycle with this
button.
This button lets you watch a live video so you can see what
is happening at home. You can take photos or even record
video clips via the camera. You can save the recordings in an
album on your smartphone.
NOTE: You can block your camera by placing the camera cover over the
lens.
You must previously authorise access to your smartphone’s camera.
This button will appear when in video mode. If you press
it, you can return to mapping mode and obtain a precise
map of the current cleaning cycle. In mapping mode, you
can access cleaning data (m², cleaning time and battery
percentage remaining).
You can change the vacuum mode with this button.
By pressing this “Settings” button, you can schedule a
programme, change the vacuum power, enable or disable
voice recognition, enable the movement sensor, etc.

12
Operation
EN
There are two (2) vacuum modes available via the mobile app by
clicking on “Settings” and then “Vacuum”:
• Normal: the robot does not particularly change its speed and
vacuums in standard mode.
• High: Useful if the floor is particularly dirty. This mode increases
the robot’s suction power during its cleaning cycle.
Vacuum and mop
Vacuum
Mop
There are two (2) water flow levels available via the mobile app by
clicking on “Settings” and then “Vacuum”:
• Level 1: releases a small amount of water.
• Level 2: releases an average amount of water.
Scheduling can only be performed via the AMIBOT Home mobile
app via the “Settings” button.
With the daily schedule feature, the robot can start a cleaning cycle
at the time and on the days you choose. You can reset the time and
scheduled times whenever you want via the mobile app.
NOTE: The robot will automatically start at the time on your smartphone via the
AMIBOT Home mobile app.
Scheduling

Three (3) cleaning modes are available on the mobile app for optimal
cleaning.
• Automatic mode: after scanning the room, the robot cleans the
room using an optimised route. It divides the room into areas in
a zig-zag fashion to vacuum any debris and dust.
• Wall mode: ideal for cleaning along walls and in corners. The
robot moves in straight lines along walls and furniture in the
room. When the robot has cleaned along all the structures in the
room, it automatically returns to its home base.
• SPOT mode: This mode is the most effective when cleaning a
particularly dirty area. With the SPOT mode, the robot will move
in a spiral to concentrate vacuuming over the required area. At
the same time, it activates its MAX vacuum power to vacuum the
dust from the floor more easily.
• MANUAL mode: With this mode, you can guide the robot using
the directional arrows.
• Back to home base: You can decide when to end the cleaning
cycle by pressing this button. Your robot will make its way to its
charging station.
13
Operation
EN
Cleaning modes

14
Operation
EN
Assembling the home base
Charging the robot
1m
2m
Plug in the home base using the power cable.
Place the home base on a level surface next to a wall, at a right angle
to the floor. Keep a distance of at least 2m in front of the base and
1m at either side.
NOTE: When your AMIBOT Vision robot is on its home base, make sure that your
robot is switched on and the home base power light is on.
1m
Assembling the side brushes
Clip the side brushes to the designated area.

15
Operation
EN
Turn the power switch to ON. "I" is ON and "O" is OFF. The robot is
ready to be charged.
Switching the robot on
Charging
Figure 1 Figure 2
There are two ways to charge the battery:
• Using the home base (Figure 1).
• Using the power adapter (Figure 2).

16
Operation
EN
Vacuum mode (Dustbin)
To use the Vacuum mode, insert the dustbin in the back of the robot.
NOTE: The dustbin has a maximum capacity of 360ml and can be used on all floor
types.
NOTE:
• The robot must be switched on while it is being charged.
• Do not place a mirror or other highly reflective object within a distance of at
least 15cm from the home base.
• When the robot’s battery is completely flat, the HOME indicator light flashes
yellow. While charging, the indicator light slowly flashes yellow. Once fully
charged, the HOME indicator light turns steady green.
• If the battery is weak while the robot is cleaning, it automatically returns to its
home base. The home base must therefore be switched on and positioned in
the correct place.
• If the robot is not used for a long period of time, you are recommended to
fully charge the battery, switch off the robot and store it in a cool, dry place.

17
Operation
EN
Figure 3
Mopping mode (water tank)
Figure 2
Figure 4
Connect the two compartments to each other (Figure 1).
Attach the cleaning pad to the water tank using the Velcros. (Figure 2)
Open the water tank’s refill nozzle and carefully pour in clean water
with some pH neutral hard floor cleaner (Figure 3).
Insert the water tank into its compartment (Figure 4) The vacuum
mode stops when the mopping mode is selected; the vacuum
automatically stops when the robot detects the water tank.
Figure 1

All of the functions below can be accessed from the AMIBOT Home
mobile app.
After having inserted the dustbin, press the AUTO button on the
robot or press “Start” on the app. The robot starts its cleaning cycle
in AUTO mode.
Starting the robot
Operation
EN
18
Tips: When using the mopping mode, remove the central brush from its compartment to
prevent risk of oxidation. This will make cleaning the robot easier!
NOTE:
• The water tank has a maximum capacity of 300ml.
• For optimum performance, the water tank must have at least 50ml of liquid.
• For optimum cleaning, check the dilution ratio indicated on the detergent
bottle.
• Only use a pH neutral cleaning product suitable for hard floors.
• Prolonged use of any other product, such as white vinegar, black soap, bleach
or essential oils could damage the water tank.