Amino 7XC User manual

2 543
1. Power/Activity LED and IR receiver.
Warning! Before connecting or disconnecting any
cable, switch o all system devices (TV, A/V Amplier,
etc.) and disconnect from the main electrical supply.
The Amigo 7XC provides options for connecting audio
and video to your TV:
HDMI (recommended): Best quality. Connect an HDMI
cable to the HDMI output of the Amigo 7XC and to the
HDMI input of your TV.
Analog A/V: Good quality. SD only composite with
analog audio left/right.
Connecting your television directly to the audio/video
output of your Set Top Box will assure a more vivid
picture and enhance your viewing enjoyment.
Connecting via Wi-Fi
Internal dual band Wi-Fi is a feature for the Amigo 7XC.
Please contact your service provider for detailed
instructions about the wireless network conguration.
Contents
The Amigo 7XC is supplied with the correct power
adapter for your local system. The package may also
contain optional accessories shown below, depending
on your service provider.
The Amigo 7XC is protected with a clear plastic lm.
This should be removed before use.
Optional accessories
1. RF antenna or cable input.
2. Analogue A/V output (adapter cable available).
3. HDMI port.
4. Ethernet port.
5. DC power input 5V 2A.
6. 2X USB port. DO NOT use this port for Powered USB.
Use for external storage media such USB ash
drive (external storage media must be formatted as
FAT32). You can also update software and program
lists using this connection.
Overview of the Amigo 7XC
1. Connecting the Amigo 7XC to a TV
Amigo 7XC User Guide
Connect an HDMI cable to the HDMI output of the
Amigo 7XC and to the HDMI input of your A/V receiver
or home cinema system.
3. Connecting the Amigo 7XC to the power
supply
Warning! The Amigo 7XC must only be used with the
supplied power adapter.
Connect the power adapter to the power input of the
Amigo 7XC, then connect the power adapter to the
mains supply. The power adapter provided will be
specic to your region. Ensure you have the correct
power adapter for your region. If you are unsure,
contact your service provider.
2. Connecting the Amigo 7XC to an A/V
receiver
1
6
Remote control and batteries
HDMI cable
Ethernet cable
3.5 mm jack to
3 x RCA cable

Important - Safety instructions
Read these instructions carefully and keep for future reference.
Note all warnings.
The product contains no user-serviceable parts. Refer all servicing
to qualied service personnel.
Handle the product with care and do not attempt to dismantle the
product.
Do not expose the product or its accessories to any liquids, rain or
moisture.
Do not locate the product near a heat source and do not block
ventilation holes: the product will become warm during operation.
Allow at least 10 cm (4”) around the product for air circulation.
Do not place the product where it may be subject to physical shock,
vibration or where the product may fall over.
Do not place the product on soft furnishings or carpets.
Only use the power supply provided by the manufacturer. The use
of any other type of power supply may invalidate any approval or
warranty applying to the product and may be dangerous. If the
power supply does not match your local system, contact your
product supplier.
Protect the power supply cord from damage.
Before disconnecting the device from the power supply cord, rst
remove the power cord from the main outlet.
Disconnect the product from the mains supply if left unused for
long periods of time or during electrical storms.
Disconnect the product before cleaning, and use a dry cloth only.
Only use attachments and accessories specied by the manufacturer.
The product is for indoor use only.
Operating information
Operating temperature: 5 °C to 40 °C (40 °F to 104 °F)
Frequency bands and maximum powers:
WLAN Bluetooth
2.4 GHz: EIRP < 20 dBm
5.18~5.24 GHz: EIRP < 23 dBm
5.26~5.32 GHz: EIRP < 23 dBm
5.50~5.70 GHz: EIRP < 23 dBm
BT-EDR: EIRP < 4 dBm
BT-LE: EIRP < 2 dBm
99-705107-01 Rev. 02-00
Hereby, Amino Communications Ltd. declares that the radio
equipment type IP Digital set-top box
is in compliance with Directive 2014/53/EU.
The full text of the EU Declaration of Conformity
is available upon request.
Support and regulatory information
European Approvals
2014/53/EU (RED Directive)
2011/65/EU & (EU)2015/863
(RoHS Directive)
2014/30/EU (EMC Directive)
2012/19/EU (WEEE Directive)
2014/35/EU
(Low Voltage Directive)
Conformity
EN62368-1:2014 + A11:2017
Manufactured under licence from Dolby Laboratories.
Dolby, Dolby Audio, and the double-D symbol are
trademarks of Dolby Laboratories.
This product contains technology subject to certain intellectual
property rights of Microsoft. Use or distribution of this technology
outside of this product is prohibited without the appropriate
license(s) from Microsoft.
The country code selection feature is disabled for products
marketed to the US/Canada.
For support and further regulatory information about this product is
available upon request.
Manufacturer/importer: Amino Communications Ltd,
1010 Cambourne Business Park, Cambourne, Cambridge,
CB23 6DP, United Kingdom.
Declaration of Conformity