Argos 719/3594 User manual

COLLECTION RACK
Width - 37cm
Depth - 30cm
Height - 80cm
Important –Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 0845 640 0800
Assembly Instructions - please keep for future reference
Issue 2 - 28/03/13
719/3594
3 Drawer Storage Unit

Safety and Care Advice
Important – Please read these instructions fully before starting assembly
Care and maintenance
• Check you have all the
components and tools listed on
pages 1 and 2.
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
• Parts of the assembly will be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers for
inserting screws ,
as this could damage the unit.
Only use hand screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• Only clean using a damp
cloth and mild detergent, do
not use bleach or abrasive
cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.

Components - Panels
Please check you have all the panels listed below
1
Tools required
Phillips screwdriver
(medium & large)
Ruler – Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
Screw x 16
40 mm
1
34
56
Right Side Panel
78(H) x 29.5(D) x 1.5(W) cm
2Left Side Panel
78(H) x 29.5(D) x 1.5(W) cm
Drawer Shelves x 3
33(W) x 28(D) x 1.5(H) cm
Top x 1
37(W) x 30(D) x 2(H) cm
Drawer base x 3
31.5(W) x 27.5(D) cm
Drawer x 3
32 (W) x 28(D) x 21(H) cm
Components - Fittings
Please check you have all the panels listed below

Assembly Instructions
3
1
6
6
6
6
5
5
6
5
Unfold 1 x Drawer
Screw 1 x Right side panel
onto 3 x Drawer
shelves with 6 x
Screw using a Phillips
Screwdriver as shown.
until it is completely
open as shown.
Push in and down 1 x
Drawer base until it
reaches the bottom of
the Drawer
Repeat for all 3 Drawers
Complete
3
3
3
3
1

Assembly Instructions
4
2
Screw 1 x Top
onto the assembly using
4 x Screw and a
Phillips Screwdriver as
shown.
Screw 1 x Left side panel
onto the assembly
with 6 x Screw with a
Phillips Screwdriver as
shown.
2
Step 3
Step 4
4

Assembly Instructions
6
Slide 1 x Drawer
into the assembly
Repeat for all 3 Drawers
Complete
Step 5
6
LP 255.10.889