Argos 875/3751 User manual

Shoe Storage Unit
Dimensions
Width - 46cm
Depth - 35cm
Height - 131cm
Important – Please read these instructions fully before starting assembly
Assembly Instructions- please keep for future reference 875/3751
935/7826
Issue 2 - 21/03/11
LP 206.87.207 / 210.95.662
If you need help or have damaged or missing parts, call the Customer Helpline: 0845 640 0800
Assembly Instructions
Step 3
Slide the canvas shoe
holder D onto the
support tubes as shown.
Step 4
Connect the second set
of legs to the other ends
of the support tubes as
shown, using 4 x screw
E and 4 x washer F.
Step 5
Connect the Velcro strap
underneath the bottom
support rails to secure
the canvas shelf.
D
E
E
F
F
If you need help or have damaged or missing parts, call the Customer Helpline: 0845 640 0800
Home Retail Group, 489-499 Avebury Boulevard, Saxon Gate West, Central Milton Keynes, Bucks, MK9 2NW

Safety and Care Advice
Important – Please read these instructions fully before starting assembly
Care and maintenance
• Check you have all the
components and tools listed
below and opposite.
• Remove all ttings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
to its nal position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your oor.
• Parts of the assembly will be
easier with 2 people.
• Dispose of all packaging
carefully and responsibly.
• Only clean using a damp
cloth and mild detergent, do
not use bleach or abrasive
cleaners.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.
Components If you have damaged or missing components,
call the Customer Helpline: 0121 753 7720
Please check you have all the panels listed below
A Top tube x 2
(73.2(w)cm)
B Base tube x 4
(65.7(w)cm)
C Support tube x 4
(42.4(w)cm)
Components - Fittings If you have damaged or missing components,
call the Customer Helpline: 0845 640 0800
Please check you have all the ttings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more ttings
may be supplied than are required.
E F
Screw x 8 Washer x 8
Tools required
Crosshead screwdriver
Ruler – Use this ruler to help correctly identify the screws and parts
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
Assembly Instructions
D Canvas show holder x 1
(40.5(w)cm x 120(h)cm x 30.8(d)cm)
Step 1
Connect 1 x top tube A
to 2 x base tube B as
shown to form a leg of
the unit.
Repeat for the other top
tube and base tubes to
form the other leg.
Step 2
Connect the four support
tubes C to one of the
legs as shown, using 4 x
screw E and 4 x washer
F.
A
B
B
E
E
F
F
C
C