Argos Silbury 4184719 User manual

Important - Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline:
Assembly Instructions - Please keep for future reference
4184719
Silbury - bed 4"
03456 400 800
Dimensions
idth : 200,8
Depth : 129,3
Height : 110,0
368601067

Important - Please read these instructions fully before starting assembly
Safety and Care Advice
• Check you have all the
components and tools listed on
pages 3 and 4.
• Remove all fittings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• ake sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close to
its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• We do not recommend the use
of power drill/drivers for
inserting screws, as this could
damage the unit. Only use hand
screwdrivers.
• Dispose of all packaging
carefully and responsibly .
Skin contact: Remove
contamination by washing with
soap and water. This procedure
should also be followed prior to
eating and drinking.
Eye contact: Rinse immediately
with clean water for 15 minutes
and seek medical advice.
If swallowed: Seek medical
advice immediately.
Glue safety - Take care when using glue, please follow the advice below
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
• From time to time check that
there are no loose screws on
this unit.
• Only clean using a damp cloth
and mild detergent, do not use
bleach or abrasive cleaners.
Care and maintenance
Note: if required the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.
2

headboard legs left
V540006
1100x54x54 mm
footboard legs x2
V540005
450x54x54 mm
headboard legs right
V540004
1100x54x54 mm
headboard upright x9
V160115
435x64x15 mm
center legs
P198102
304x90x19 mm
bed side x2
V198104
1900x115x19 mm
center rail
P198101
1931x90x19 mm
rail x2
P250014
1860x25x25 mm
slat x14
P160113
1218x65x15 mm
headboard
P198114
1185x68x19 mm
footboard
V198110
1185x115x19 mm
headboard x2
V198109
1185x90x19 mm
Please check you have all the panels listed below
Components - Panels
3
If you have damaged or missing components, call
the Argos Customer Helpline: 03456 400 800
12
34
12
11
8
9
10
7
5
6

A10369
ø8x40 mm wooden dowel x54
A10696
M6xø10,5x20 mm screw bush x12
A10672
ø35 mm sector x12
A10659
M6x50 mm sector screw x12
A10287
7x40 Ø15 screw x20
A10240
ø6,0x11,5 mm screw x8
A10156
ø4,5x60 mm screw x2
A10070
ø3,5x30 mm x28
A10821
45x40x29 mm bracket x2
A103474
Ø35/40 cap x4
I10882
30 g glue x1
A10678
6 mm allen key x1
A10680
4 mm allen key x1
A10663
120 mm sector key x1
Please check you have all the panels listed below
Components - Fittings
If you have damaged or missing components, call
the Argos Customer Helpline: 03456 400 800
Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
Tools re uired
Ruler - Use this ruler to help correctly identify the screws
ABC
D E F
LK
J
IHG
N
4

Step 1
Assembly Instructions
Pour a drop of glue K
into the holes indicated
on the headboard
upright 1 before
knocking the dowels A
into the holes using a
small hammer.
Knock the dowels A into
the holes indicated on
the headboard 6 and 7
using a small hammer.
Step 2
Step 3
Knock the dowels A into
the holes indicated on
the footboard 5 using a
small hammer.
5
A
A
1
A
A
K
K
x9
A
A
A
A
A
A
6
7
A
A
A
A
5

Assembly Instructions
Insert the screw bush B
into the holes indicated
on the footboard legs 2
and the headboard legs
3 and 4 using the allen
key N.
Step 4
Step 5
Screw the sector screw D
into the holes indicated
on the footboard legs 2
and the headboard legs
3 and 4 using a flatblade
screwdriver.
Leaving at least 40 mm
remaining. See details.
6
2
3
4
B
B
B
B
B
BB
B
B
B
x2
D
D
D
D
D
DD
D
D
D
D
N
2
3
4
x2

Assembly Instructions
Push the footboard legs
2 onto the footboard 5.
Step 6
Step 7
Insert the sector C into
the holes indicated on
the footboard 5 as
shown.
Fix the footboard legs 2
to the footboard 5 by
twisting the sector screw
D using the sector key L.
Tighten properly.
Fix the bracket I to the
footboard 5 using the
screw F.
7
L
2
2
5
C
C
F
F
i
2
2
5

Assembly Instructions
Pour a drop of glue K
into all the holes
indicated on the
headboard 6 before
placing the headboard
upright 1.
Push tightly together.
Step 8
Step 9
Step 10
Fix the 2nd headboard 6
by following the
instructions in step 8.
All 9 pieces in one step.
Push the headboard legs
3 and 4 onto the
headboard 6 and 7 as
shown.
Ensure that the
headboards are faced
correctly.
8
K
K
1
6
3
4
7
6
6

Assembly Instructions
Insert the sector C into
the holes indicated on
the headboard 6 and 7
as shown.
(4 of them are located
on the opposite side)
Fix the headboard legs 3
and 4 to the headboard
6 and 7 by twisting the
sector screw D using til
sector key L.
Tighten properly.
Fix the bracket I to the
headboard 7 using the
screw F.
Step 11
Step 12
Knock the dowel A into
the holes indicated on
the bed side 8 using a
small hammer.
Fix the rail 9 to the bed
side 8 using the screw E
and the allen key
9
L
x10
C
C
C
C
C
C
F
F
i
3
4
6
7
A
A
A
A
E
x2
8
9

Assembly Instructions
Push the bed side 8 onto
the headboard and the
footboard as shown.
Ensure that both the
headboard and the
footboard are faced
correctly.
Step 13
Step 14
Insert the sector C into
the holes indicated on
the bed side 8 as shown.
Fix the bed side 8 to the
footboard and the
headboard by twisting
the sector screw D using
the sector key L.
Tighten properly.
10
L
8
8
8
8
C
C
C
C

Assembly Instructions
Place the center rail 11
on the brackets I, fix it
to the brackets using
screw F.
Place the center legs 12
under the center rail 11
fix it using screw G.
Step 15
Step 16
Place the slats 10 onto
the rail 9.
Ensure there is
approximately the same
distance between the
slats.
Fix the slats using the
screw H.
11
11
12
F F
F F
GG
9
10
H
x14
x28

Assembly Instructions
If you need help or have damaged or missing parts, call the Customer Helpline:
03456 400 800
Home Retail Group - 489-499 Avebury Boulevard - Saxon Gate West - Central ilton Keynes K9 2NW
Step 17
Place the cap J onto the
holes on the headboard
6.
12
Assembly is complete.
J
J
J
J