ARRI SkyPanel X Preliminary User manual

SkyPanel X
Preliminary
OPERATING MANUAL
September 2023 • 0.8 • English
L5.0049708

Disclaimer
SkyPanel X Operating Manual 3
Disclaimer
Before using the product, be sure to read and understand all respective instructions.
The product is available for commercial customers only.
For product specification changes since this document was published, refer to the latest publications
of ARRI data sheets or data books, etc., for the most up-to-date specifications.
Not all products and / or types are available in every country. Please check with an ARRI sales
representative for availability and additional information.
The information given in this document is subject to change without notice.
While ARRI endeavors to enhance the quality, reliability and safety of their products, customers
agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To
minimize risk of damage to property or injury (including death) to persons arising from defects in the
products, customers must incorporate adequate safety measures in their work with the system and
have to heed the stated canonic use.
ARRI or its subsidiaries expressly exclude any liability, warranty, demand or other obligation for any
claim, representation, or cause, or action, or whatsoever, express or implied, whether in contract or
tort, including negligence, or incorporated in terms and conditions, whether by statue, law or
otherwise. In no event shall ARRI or its subsidiaries be liable for or have a remedy for recovery of
any special, direct, indirect, incidental, or consequential damages, including, but not limited to lost
profits, lost savings, lost revenues or economic loss of any kind or for any claim by third party,
downtime, good will, damage to or replacement of equipment or property, any cost or recovering of
any material or goods associated with the assembly or use of our products, or any other damages or
injury of the persons and so on or under any other legal theory.
Neither ARRI nor its subsidiaries assume any liability for infringement of patents, copyrights or other
intellectual property rights of third parties by or arising from the use of ARRI products or any other
liability arising from the use of such products. No license, express, implied or otherwise, is granted
under any patents, copyrights or other intellectual property right of ARRI or others.
In the case one or all of the foregoing clauses are not allowed by applicable law, the fullest extent
permissible clauses by applicable law are validated.

Imprint
4 SkyPanel X Operating Manual
Imprint
© 2023 Arnold & Richter Cine Technik GmbH & Co. Betriebs KG. All rights reserved.
The device contains proprietary information of Arnold & Richter Cine Technik GmbH & Co. Betriebs
KG; it is provided under a license agreement containing restrictions on use and disclosure and
protected by copyright law. Reverse engineering of the software is prohibited.
No part of this publication may be used for distribution, reproduction, transmission, transcription,
storage in a data retrieval system, or translated into any language in any form by any means without
the prior written permission of Arnold & Richter Cine Technik GmbH & Co. Betriebs KG.
If you are downloading files from our web pages for your personal use, make sure to check for
updated versions.
ARRI cannot take any liability whatsoever for downloaded files, as technical data are subject to
change without notice.
Due to continued product development the information in this document may change without notice.
The information and intellectual property contained herein is confidential between ARRI and the
client and remains the exclusive property of ARRI. If you find any problems in the documentation,
please report them to us in writing. ARRI does not warrant that this document is flawless.
Art-NetTM Designed by and Copyright Artistic Licence Holdings Ltd.
ARRI, the ARRI Logo, ARRIMAX, ARRISUN, EB, , L-Series, MAX Technology, M-Series,
Orbiter, POCKETPAR, Quick Lighting Mount, QLM, True Blue, SkyPanel, SKYPANEL, Stellar, T12
as well as the blue/silver color combination are registered trademarks of Arnold & Richter Cine
Technik GmbH & Co. Betriebs KG.
Original version.
For Further Assistance
Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Flintsbacher Str. 1-5
D-83098 Brannenburg
Germany
E-mail: [email protected]
Website: https://www.arri.com/en/technical-service/

Content
SkyPanel X Operating Manual v
Content
1 About this Document .................................................................................................................................. 6
2 About this Product ...................................................................................................................................... 7
2.1 Introduction to SkyPanel X.................................................................................................................... 7
2.2 Intended Use......................................................................................................................................... 7
2.3 Identification .......................................................................................................................................... 7
2.4 Environmental Conditions ..................................................................................................................... 7
2.5 Technical Data (Single Device)............................................................................................................. 8
2.6 Dimensional Drawings .......................................................................................................................... 10
2.7 Scope of Delivery and Warranty ........................................................................................................... 11
2.8 To Replace the Light Source................................................................................................................. 11
2.9 Certifications and Safety Standards...................................................................................................... 11
3 Safety Instructions ...................................................................................................................................... 13
3.1 Structure of Safety and Warning Messages.......................................................................................... 13
3.2 Warning Symbols and Product Labels .................................................................................................. 14
3.3 General Safety Instructions................................................................................................................... 15
4 Product Overview........................................................................................................................................ 19
4.1 Product Layout ...................................................................................................................................... 19
4.2 Accessory Layout.................................................................................................................................. 20
4.3 Optical Accessory Layout...................................................................................................................... 22
5 Mounting and Assembly............................................................................................................................. 23
5.1 To mount the spigot .............................................................................................................................. 23
5.2 Yoke Attachment and Detachment ....................................................................................................... 23
5.3 Attachment and Detachment of Optical Accessories ............................................................................ 24
5.4 Power Supply ........................................................................................................................................ 25
5.5 Control Network .................................................................................................................................... 27
6 Basic Operation........................................................................................................................................... 30
6.1 Pan and Tilt ........................................................................................................................................... 30
6.2 Interfaces and Control Data .................................................................................................................. 30
6.3 ALL-WEATHER Control Panel.............................................................................................................. 31
6.4 Switching On and Off ............................................................................................................................ 31
8 Maintenance, Cleaning and Repair............................................................................................................ 33
8.1 Maintenance.......................................................................................................................................... 33
8.2 Cleaning ................................................................................................................................................ 34
8.3 Tilt Brake ............................................................................................................................................... 35
8.4 Repair.................................................................................................................................................... 35
9 Transportation, Storage and Disposal ...................................................................................................... 36
10 ARRI Service Contacts ............................................................................................................................... 37

1 | About this Document
6 SkyPanel X Operating Manual
1 About this Document
This operating manual is aimed at everyone involved in using the device. It provides directions on
how to operate it safely and as intended. To ensure safe and correct use, all users must read the
operating manual before using the device for the first time.
This operating manual is an essential part of the device. It must be easily accessible and in close
proximity to the device so that users can use it as a reference anytime.
The separate user manual contains more detailed information about the features and functionalities
of the device. Please visit the website www.arri.com to download the user manual.
Keep the operating manual, the user manual and all other operating and assembly instructions
belonging to the device in a safe place for future reference and possible subsequent owners.
For useful information in addition to these manuals please have a look at the ARRI learn & help
section on the ARRI website.
The ARRI Academy courses provide unrivalled insights into the full possibilities of working with ARRI
camera systems, lenses, lighting systems and accessories.
Our advanced service training courses are designed to transfer detailed knowledge about how to
service and repair all types of ARRI products and give you permanent access to detailed service
instructions, special tools and service parts. To learn more, please visit ARRI academy or contact
[email protected].
SkyPanel X product page
ARRI documentation portal
Searchkeys: SkyPanel X, L1.0048487
Document Revision History
Document ID: L5.0049708
Version Release Date Note
0.8 September 2023 Preliminary

About this Product | 2
SkyPanel X Operating Manual 7
2 About this Product
2.1 Introduction to SkyPanel X
The SkyPanel X represents the next generation of high-end panel lights – max connectivity and best
color/brightness setup.
The SkyPanel X is an all-weather, versatile and high output LED luminaire. It enables maximum
usability for users and rentals while keeping the high-end parameters of ARRI in terms of quality,
innovation and reliability.
The SkyPanel X is conceived as a state of the art modular design able to deliver soft and hard
lighting. It is optimized for fast, safe and intuitive operation.
2.2 Intended Use
NOTICE
The SkyPanel X is intended to illuminate persons and objects in a dry or wet environment. The
device meets protection class IP 66. Although it is protected against the ingress of dust and
moisture, it must not be permanently installed outdoors.
Always follow the safety information. Any usage other than described in this operating manual is not
permitted and can damage the device. It can lead to associated risks such as short-circuit, fire
hazard, electric shock, etc. You are not allowed to modify the device.
2.3 Identification
The SkyPanel X serial number is located on a
label on the back of the SkyPanel X underneath
the climate membrane.
The serial number consists of the last 4 digits of
the product number L1.0048474-1234 (here:
1234).
2.4 Environmental Conditions
The SkyPanel X should only be used and stored under certain environmental conditions.
Check the following conditions before commissioning and operation:
Permissible Operating Temperature -4° F to +104° F / -20° C to +40° C
Permissible Storage Temperature -4° F to +140° F / -20° C to +60° C
Permissible Humidity 0 - 95% RH from -4° F to +104° F / -20° C to +40° C
Non condensing

2 | About this Product
8 SkyPanel X Operating Manual
2.5 Technical Data (Single Device)
Physical
Wide x height x depth (without yoke) 29.1 x 13.3 x 6.1 in / 738 x 339 x 154 mm
Weight (without yoke and accessories) 33 lbs / 15 kg
Construction
Color blue / silver
Housing Composite and aluminum
Protection glass 3 mm
Protection rating IP 66
Protection Class I
Installation
Mounting 28 mm Spigot
Approved inclination +/- 90°
Minimum clearance around device 20in/0.5m
Minimum distance from light aperture to persons,
objects or surfaces
40in/1.0m
Thermal
Cooling active cooling
Number of fans 2
Noise level (High CRI Vari Fan) <= 30 dB(A)
Noise level (Standard) <= 20 dB(A)
Noise level (High Output) <= 38 dB(A)
Electrical
Power supply range 100 - 240 V ~, 50 / 60 Hz
Battery power range 48 V - 52 V =
Typical power draw 800 W
Control and Programming
Channels 12 - 156
Setting and addressing User menu and remote via control network, web
portal, bluetooth
DMX compliance ESTA DMX512A
LumenRadio CRMX
RDM compliance ANSI E1.31
Art-Net Version 4
sACN ANSI E1.31
HTTP Web, mDNS Bonjour, PTP, NTP
Firmware update Via USB port, network and ALSM
Connectors
MAINS IN/THRU powerCON TRUE1 TOP
BATTERY 48V DC 3-pin XLR connector, male
DMX IN / DMX OUT 5-pin XLR
LAN 1/2 RJ-45 connector, IP65
Control Panel PoE socket, Lemo, IP 68

About this Product | 2
SkyPanel X Operating Manual 9
Light Source
Type Full Spectrum, 6-color RGBACL LED
Number of light engines 4
Calibrated white light range 1.500 K - 20.000 K
Colored light RGBACL color mixing
Color rendition index CRI 90 min. / 99 max. (High CRI VariFan mode)
TLCI 93 (typical, High CRI VariFan mode)
Green – Magenta point -1 / +1
Optical Path
Type Soft or hard light
Open face, beam angle 120°
X21 Dome, beam angle 106°
HyPer optic, beam angle 11°
Dynamic Functions
Dimmer electronic, 0 - 100%
Color mixing CCT, HSI, RGBW, RGBACL, Effect, XY, Gel,
Source Matching
User Interface
Device menu Detachable ALL-WEATHER control panel with
display and buttons
USB-C port USB 2.0
5 V / 3.0 A
Note: Technical data is subject to change without notice.

2 | About this Product
10 SkyPanel X Operating Manual
2.6 Dimensional Drawings
All dimensions in mm (above line) and in (below line).

About this Product | 2
SkyPanel X Operating Manual 11
2.7 Scope of Delivery and Warranty
NOTICE
The packaging consists of recyclable materials. For the sake of the environment, dispose the
packaging material at a suitable disposal site. Always store, ship and dispose according to local
regulations. ARRI is not liable for consequences from inadequate storage, shipment or disposal.
On delivery, please check if package and content are intact. Never accept a damaged or incomplete
delivery.
Delivery
ARRI offers different SkyPanel X sets for different applications. Please visit the ARRI website and
check the product catalog if you received a complete delivery.
Warranty
For scope of warranty, please ask your local ARRI service center. ARRI is not liable for
consequences from inadequate shipment, improper use or use of third-party products.
2.8 To Replace the Light Source
NOTICE
To Replace the Light Source
The light source contained in this luminaire is replaceable. If the light source has reached the end of
its operational life or if the light source fails before it reached the end of its specified operational life,
please contact the manufacturer or his service agent or a similar qualified person.
2.9 Certifications and Safety Standards
EU Declaration of Conformity
Brand Name: ARRI
Product Name: SkyPanel X
Product Description: Luminaire for stage lighting, television and film studios (outdoor and
indoor).
LED luminaire for professional use.
The product conforms to the specifications of the following European directives:
• Directive 2014/53/EU of the European Parliament and the Council of 16 April 2014 on the
harmonisation of the laws of the Member States relating to the making available on the market of
radio equipment
• Directive 2011/65/EU of the European Parliament and the Council of June 8, 2011 on the
restriction of the use of certain hazardous substances in electrical and electronic equipment and
the Commission Delegated Directive (EU) 2015/863 of March 31, 2015.
The compliance with the requirements of the European Directives has been verified by applying the
following standards:
• Art. 3.1 a nach 2014/35/EU –following 2014/35/EU
– EN 60598-1:2021/A11, EN IEC 60598-2-17:2018, EN 62471:2008, EN 62493:2015;
• Art. 3.1 b nach 2014/30/EU –following 2014/30/EU

2 | About this Product
12 SkyPanel X Operating Manual
– EN IEC 55015:2019 + A11:2020, EN 61547:2009, EN IEC 61000-3-2:2019, EN
61000-3-3:2013 + A1:2019 + A2:2021 + A22021/AC2022,
ETSI EN 301 489-1 V1.9.2, ETSI EN 301 489-1 V2.1.1, ETSI EN 301 489-17 V3.1.1;
• Art. 3.2
– ETSI EN 300 328 V2.2.2 (partly);
• EN IEC 63000:2018;
Year of affixed CE-marking: 2023
The manufacturer bears sole responsibility for issuing this declaration of conformity.
UK Declaration of Conformity
Brand Name: ARRI
Product Name: SkyPanel X
Product Description: Luminaire for stage, lighting, television and film studios (outdoor and
indoor).
LED Luminaire for professional use.
The designated products conform to the specifications of the following United Kingdom regulations:
1. The Electrical Equipment (Safety) Regulations 2016
2. The Electromagnetic Compatibility Regulations 2016
3. The Radio Equipment Regulations 2017
4. The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic
Equipment Regulations 2012
The compliance with the requirements of the United Kingdom regulations was proved by the
application of the following standards:
1. EN 60598-1:2015 + A1:2018; EN IEC 60598-2-17:2018; EN 62471:2008; EN 62493:2010
2. EN 55015 :2019 + A11:2020; EN 61547:2009; EN 61000-3-2:2014; EN 61000-3-3:2013; EN 301
489-1 V1.9.2
3. EN 300 328 V2.2.2
4. EN IEC 63000:2018
The manufacturer bears sole responsibility for issuing this declaration of conformity.

Safety Instructions | 3
SkyPanel X Operating Manual 13
3 Safety Instructions
This safety information is in addition to the specific operating instructions in general and must be
strictly observed for safety reasons. Read and understand all safety and operating instructions
before you operate or install the device. Retain all safety and operating instructions for future
reference. Always follow the instructions in this and all documents supplied with the device to avoid
injury to yourself or others and damage to the device or other objects.
Assembly and operation should only be carried out by trained staff familiar with the device. Only use
the tools, materials and procedures recommended in this document. For the correct use of other
equipment, see the manufacturer's instructions.
3.1 Structure of Safety and Warning Messages
These instructions use safety instructions, warning symbols and signal words to draw your attention
to different levels of risk:
DANGER
DANGER indicates an imminent danger. If not avoided, death or serious injury will
result.
Always follow the recommended measures to avoid this hazardous situation.
WARNING
WARNING indicates a possibly imminent danger. If not avoided death or serious
injury may result.
Always follow the recommended measures to avoid this potentially hazardous situation.
CAUTION
CAUTION indicates a potentially imminent danger. If not avoided, slight or minor
injuries may result.
Always follow the recommended measures to avoid this potentially hazardous situation.
NOTICE
NOTICE indicates a potentially harmful situation. If not avoided, the equipment or
something in its surrounding may be damaged.
Always follow the recommended measures to avoid this situation.
HINT
Not relevant to safety, HINT provides additional information to clarify or simplify a procedure.

3 | Safety Instructions
14 SkyPanel X Operating Manual
3.2 Warning Symbols and Product Labels
READ THE INSTRUCTIONS
Read all instructions carefully before
installing, using or servicing the device.
Refer to the ARRI website
www.arri.com for the latest
documentation.
NOT FOR RESIDENTIAL USE
Not to be used in residential areas. The
device is intended for professional use
only.
The device may only be operated by
qualified persons.
CAUTION – GENERAL RISK!
General warning sign. Obey the
general and local safety regulations.
DANGER OF LIFE! CAUTION – RISK
OF ELECTRICAL SHOCK
Do not open the housing of the device.
For safe operation, the housing must
be completely closed at all times.
CAUTION – HIGH BEAM INTENSITY!
RISK OF EYE INJURY!
Do not stare into the operating light
source of the device.
CAUTION – OPTICAL RADIATION!
The device emits optical radiation such
as UV, visible radiation, IR during
operation. Always obey the minimum
distance to persons and objects.
Obey the information about the
photobiological hazards and risk group.
CAUTION – MOVING PARTS! RISK
OF CRUSHING!
Do not crush your fingers or hands
when moving the device or
components of the device.
CAUTION – HOT SURFACE! RISK OF
BURNING!
The device or parts of the device
become hot during operation. Touch
hot parts only with protective gloves.
CAUTION – SHARP ELEMENT! RISK
OF CUTTING AND STITCHING!
Wear protective gloves when handling
the element.
CAUTION – OBSTACLES! RISK OF
STUMBLING AND FALLING!
Warning of obstacles on the ground.
DISCONNECT ELECTRICALLY
Disconnect electrically before re-
lamping or carrying out any service or
maintenance work or when the device
is not in use.
REPLACE DAMAGED COMPONENTS
Replace any cracked or scratched
protective shields such as lenses, UV-
screens, diffusions or housing parts
immediately. Do not use a device with
broken parts.
The device shall only be used complete
with its protective shield.
Direct Current symbol found on
electronics requiring or producing DC
power.
Mandatory Safety Distances
Always observe the minimum distances to
persons and flammable objects given on the type
plate. Always observe the maximum tilt angle.

Safety Instructions | 3
SkyPanel X Operating Manual 15
3.3 General Safety Instructions
DANGER
High voltage!
Risk of electric shock and fire hazard.
uRead and understand all safety information and operating instructions before you operate or
install the device or the system.
uNot to observe the safety information or general rules of reason may cause injury or death to
yourself and others or damage to equipment.
uUse the device solely and exclusively as described in the instructions.
uAlways check that the local AC power matches the voltage and frequency range printed on the
type label of the device before use.
uAlways earth the fixture electrically.
uUse only TN- or TT one phase power supplies and a power plug according to IEC 60309-1 or a
similar national standard.
uUse only a power and connection cable designed for the device.
uNever use a cable for transportation.
uNever hang the device on its cables.
uDo not open the device. There are no user serviceable parts inside.
uIsolate the device from the power source when working on it or when it is not in use.
uIn case of visible damage to cables or housings, the device must not be operated any longer.
uNever attempt to repair any part of the device on your own. Maintenance and repair work is only
to be carried out by an authorized ARRI service center.
uDo not bypass or remove any safety feature of the device.
WARNING
Operation of the Device in Case of Obvious Damage
Risk of electric shock and fire hazard caused by short circuit.
uNever use the device if electrical lines or housing are visibly damaged.
uOnly use the type of power source indicated in the manual.
uAlways grip the power plug to unplug the power cable.
uDo not lay cables over sharp edges (e.g. sheet metal, profile or other cut edges). Damaged
cables can cause electric shock, short circuit or fire.
uDo not remove or deactivate any safety measures from the device (incl. warning stickers or paint
marked screws).
uDo not try to repair the device. Repairs may only be carried out by an authorized ARRI service
center.

3 | Safety Instructions
16 SkyPanel X Operating Manual
WARNING
Humidity and Condensation
Risk of electric shock and fire hazard caused by short circuit.
uNever expose the device to rain or moisture in a fixed installation for a long time.
uDo not immerse the device in any liquid.
uDo not use the device for 2 h when it was exposed to big temperature differences as condensed
moisture may damage the device electrically when switched on.
uDo not bend the power cable directly after the connector. Water could immerse and cause short
circuits and damage the connector.
WARNING
Overheating
Risk of skin burns and fire hazard.
uDo not operate the device if the ambient temperature exceeds 104° F / +40° C.
uIntensive use can cause the surface to become hot (up to VARIABLE). Let the device cool down
completely before you handle it.
uNever cover air vents during operation. Keep a minimum clearance around the air vents of
20in/0.5m.
uNever point an intense light beam from light source to the device.
uDo not place the device on or nearby heat sources. Intense heat cause damage to the device or
automatic power off during operation.
WARNING
Intense light
Risk of injury and fire hazard.
uDo not stare at an operating light source.
uDo not stare at the light output aperture. Risk of irreversible eye injury. Wear safety glasses.
Keep a minimum distance to an illuminated surface, objects or persons of 40in/1.0m .
uThe device must not be used without a diffuser or intensifier installed.
Photobiological Safety
Risk group 1
Potentially dangerous optical radiation. Do not look into the light for longer periods of time during
operation. Can be harmful to the eyes.*
DO NOT
EXPOSE
RISK
GROUP 2 GROUP 1
RISK RISK
GROUP 0
Distance 1 m / 3,2 ft
*The risk group listed here applies to the minimum distance specified. Further information regarding
hazards due to optical radiation are present and can be requested from your dealer if necessary.

Safety Instructions | 3
SkyPanel X Operating Manual 17
WARNING
Heavy weight
Risk of injury and damage.
uThe yoke must be mounted hanging or standing vertically. Lateral load can cause deformation or
breaking the spigot, its fixing screw and the yoke.
uDevices and accessories must be secured against fall when mounted above floor level. Always
observe common and local safety regulations.
uSecure the device against tipping when standing on the floor. Always observe common and local
safety regulations.
uDisconnect all cables prior to transport.
WARNING
Falling System Parts
Risk of injury and damage.
Do not built up or assemble the device in a wrong way. It can fall down and cause serious injuries
and damage to the device or property.
uInstallation and operation must only be carried out by approved persons who know the device.
Obey the accident prevention regulations.
uNever put the device on a not stable trolley or hand truck, stand, tripod, bracket, table or any
other not stable support device.
uAlways place the device on dedicated support devices.
uSecure the device and its accessories against falling and tipping over. Obey the general and
local safety regulations.
WARNING
Falling System Parts due to Wind Load
Risk of injury and damage.
uCheck prior to work whether relevant natural or artificial wind loads can be expected in the
working environment.
uAlways secure the lighting system and its accessories against falling, when installed above
head.
uAlways secure stands and tripods for the lighting system with sandbags against tipping over.
uNever continue the work when the wind load is too strong.
uObey the general and local safety regulations regarding wind load, where available.
WARNING
Connected Cable on the Floor
Risk of injury caused by tripping, falling or slipping over connected cables.
uAlways properly secure cables connected to the device and accessories.
uAlways install cables that they cannot be tripped over.
uIf necessary, use a cable duct or secure the cables with adhesive tape.
uAlways disconnect the cables from the device and accessories before moving.

3 | Safety Instructions
18 SkyPanel X Operating Manual
CAUTION
Deformation Caused by External Force
Risk of damage to the SkyPanel X.
uDo not use the quick mount adapters to carry the device.
uDo not apply lateral force to the quick mount adapters.
uDo not rest the device on the quick mount adapters.
CAUTION
Broken Cover Glass
Risk of cutting fingers.
uDo not hit the cover glass.
uUse protective gear in case of broken cover glass.
CAUTION
Unintentional or Unexpected movement
Risk of crushing body parts. Narrow gaps and heavy weight.
uCrushing of fingers or hand between yoke and housing. Always wear protective gloves and keep
your fingers out of the space between yoke and housing.
uAlways wear protective gloves when mounting accessories.
uNever rest the device on your hand or foot. Risk of crushing fingers, hand or foot.
NOTICE
Parts Loosening Caused by External Vibration
Risk of damage to the SkyPanel X.
uDo not use in places where the device is subject to vibration.
uDo not store in places where the device is subject to vibration.
NOTICE
Use of Unauthorized Accessories and Service Parts
Risk of damage to the SkyPanel X
uDo not use any accessories and service parts that are not recommended by ARRI. They may
damage any connected devices and invalidate the warranty.

Product Overview | 4
SkyPanel X Operating Manual 19
4 Product Overview
The light source of the SkyPanel X is located behind a sealed protective glass. The device is
equipped with accessory mounts on all four corners on the front.
There are two yoke brackets with quick-release levers on the left and right side of the device. The
yoke brackets can be dismantled to mount several devices in a group.
The large heat sink is located between the housing of the light source and the housing for the
integrated power supply unit, fan and power electronics.
The device is waterproof according to IP 66. A pressure relief valve is located at the back to equalize
the pressure when the device heats up and cools down. The fans between the electronics housings
comply with protection class IP 66. A perforated sheet metal protects the fans from damage.
On the back of the device is the control panel recess and the connector panel.
The control panel connects automatically to the SkyPanel X when inserted into the recess. It is held
in place magnetically.
All connections are provided with protective rubber caps or correspond to protection class IP 66. The
protective caps must be mounted if a connection is not used to comply with protection class IP 66.
4.1 Product Layout
Back View
1
2
3 5
6
7
8
9
10
11
12
4
1 LAN 1 / 2 (with rubber caps) 7 Remote / display connector
2 Status LED 8 Fan cover
3 DMX in / thru / out (with rubber caps) 9 Climate membrane
4 Focus handle 10 Mains in / thru (with rubber caps)
5 USB-C connector (with protective cap) 11 Control panel holding magnet
6 Battery in (with rubber cap) 12 Control panel connector pins

4 | Product Overview
20 SkyPanel X Operating Manual
Left View
(As seen from the front)
13 13
14
15
15
17
18
19
16
13 Rubber foot (3x)
14 Drain for control panel recess
15 Accessories holder (4x)
16 Retaining clip for accessories (left and right
side)
17 Yoke bracket (left and right side)
18 Quick release lever
19 Handle and safety rope attachment
4.2 Accessory Layout
ALL-WEATHER Control Panel
51 2 3 4
1 Connectors to SkyPanel X
2 4 pin Lemo connector
3 Neodym magnet
4 Thread for D ring
5 Sensor for display brightness
Manual Yoke
2 3
4
1
1 Yoke adapter (2x)
2 Cable sling (NOT safety rope!)
3 Tilt brake
4 28 mm spigot